PRODUCT TECHNOLOGY

Wileyba flow meter

Operating principle

Wileybometers of flow.

Inserting an average speed tube (Averaging Pitot Tube) in a flow meter; Mass flow: q = K ⁇ (K for flow factors, determined by geometric dimensions of the probe) The core difference between flow-based constriction in a pipe and the porosity plate is that the hole plate is ""accumulation of the pressure; Willibar is a "discretionary pressure" from the insertion of the total detector pressure and static pressure. The former is under pressure. (Performing) 20% ~80% The latter has minimal pressure (only the difference). 1% ~2% )。 Wileyba probe currents P₁ (total pressure) P₂ (silent pressure) ⁇ P = P₁ - P₂Q = K ⁇ (P/O)

Viliba flow gauge (inserted average speed tube)
Viliba's scout.
Fluid V
The diamond cross.
High pressure hole P1 (total pressure) Low pressure hole P2 (silent pressure)
- To the front. - To the back.
ΔP = P1 − P2
Q = K. Zi (P/O) (pore-pore average pressure, very low pressure)
A schematic of the principles of work

Wileybop flow meter support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Wileyba flow meter Technical note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

The technical features and selection elements of the Wyiba flow meter are understood from measurement principles to field applications.

01

MEASUREMENT PRINCIPLE

Operating principle

Inserting an average speed tube (Averaging Pitot Tube) traffic metering;

The difference between low-pressure pressure holes and the two is the difference between the pressure differential ⁇ P, the square root and the flow.

Flow formula P = P₁ (total pressure) - P₂ (silence pressure)

Measurement formulaClick to see the big picture
⁇ P = P1 (total pressure) - P2 (silent pressure) Q = K ⁇ (old) Mass flow: q = K ⁇ (old ⁇ P) (K for flow factor, determined by geometry of the probe) m
Technical IconClick to see the big picture
Viliba flow gauge (inserted average speed tube)
Viliba's scout.
Fluid V
The diamond cross.
High pressure hole P1 (total pressure) Low pressure hole P2 (silent pressure)
- To the front. - To the back.
ΔP = P1 − P2
Q = K. Zi (P/O) (pore-pore average pressure, very low pressure)

The core difference between m-scaling in the pipe causing the flow-coding contraction and the plume is that

The hole plate is ""accumulation of the pressure; the Viabra is "accumulation of the difference between total and static pressure" of the probe. The former is heavily damaged (by 20% and 80%) and the latter is extremely low (by 1% and 2%).

The multiple high-pressure pressure holes distributed along the length of the probe by the "equivalent area" to the front of the Viagra probe are not single points, but are unevenly distributed at the average flow speed of the cross-section (e.g., not developing the stream) and are more accurate – this is the origin of the name of the "equipment tube."

The dual advantage of "mature, low price" and "low pressure, online penetration, application of large pipe paths" between the "moderate, low price" and the insertion is the dominant choice for pressure measurement.

  1. 01

    Verabar's flow meter is a Bernoulian equation in a differential flow meter family, but the structure is completely different from the perforation plate. It uses a shape-shaped probe to insert a pipe, a probe, a total pressure, a P₁ backstream.

  2. 02

    It's a unique diamond, and it's a cross-section, and it's on the front, and it's got multiple high-pressure pores with an equal area distribution, and it's measured at static P₂.

  1. 01

    Each hole is measured at the speed of flow inside the ring, and the pressure hole is connected to the inside of the probe.

  2. 02

    Average total pressure. Even if the pipe is

  1. 01

    Critical understanding

    ♪ We're gonna be together ♪

  2. 02

    Difference pressure (poreboard)+

  3. 03

    Inserts an equal-speed tube structure (several from the porosity plate). It also has a differential pressure pattern

02

PRODUCT STRUCTURE

Structure

Viola Spectrum (average speed tube) Installation of a (ball valve component) pressure pipe (triple valve) DWVVC is composed of, and is made up of, and is compensated by the pressure transmitter, which completes the flow display and temperature reimbursement with the secondary instrument.

1 Wirebar probe high pressure tube 3-cylinder 5 amplifier / DCS squared Temperature compensation instantaneously / cumulative flow pipe ⁇ 4 differential transporter H (high pressure)/L (low pressure) 4 - 20 The main part of the magma, Williba, is located in the separation zone with a low-pressure back-flow feature. The static pressure stabilizes the pressure differential signal with a high and barrier-resistant signal.

Ball valves installation

Function and description: Instant flow online plugs Spectrum plugs through the valves to insert conduits to support (online overhaul, cleaning)

Disk Transmitters

Function and description: Convert the pressure difference ⁇ P to 4-20mA; smart to output the difference pressure at the same time + static pressure + temperature

The barbed wire.

Function and description: High pressure/low pressure two barometers, liquid inflatable, gas incubated, winter cold

Pyrometric pressure.

Feature: Flow-side distribution of multiple high-pressure holes by area equivalent Advantage: average total pressure, anti-flow field malformation

03

TECHNICAL GUIDE

Advantages and disadvantages

Main strengths

Main limitations

The pressure is very small.

Medium precision

The damage is only 1% to 2% of the pressure.

±1.0% ~±2.0%, lower than electromagnetic

It's one of the tens of thousands of holes. It's a remarkable energy saving.

(±0.5%), Turbo (±0.2 ~ 0.5%)

Online plugged

The measure is the average speed of the point.

The ball valves are installed, they're running.

Reliance speed distribution, need

Installed, overhauled, cleaned

Full development of the field, otherwise there is a large margin of error

Application of large pipe paths

There are still requests for the direct line.

DN50 ~ DN3000 > ,

It's easier than a hole plate.

Especially for large pipes/smoking pipes

But the disturbance is long and it takes a straight line to get to the point.

Simple structure, low price

Small routing accuracy difference

Pure mechanical probe, cost.

DN50 Queue Revealing Field

Far below same calibre turbo/EM/ ultrasound

Disruption. Precision drops.

The scale is bigger.

The pressure hole could be blocked.

1

10~1:30, better than the porosity plate

High viscosity, crystallization, fibre-based

(1

3~5)

The medium is impassable.

Good for the blockage.

Remark to Flow

Scramble + backstream low pressure hole set

Flow factor K to be marked (poreboard)

The charge is not too much to block.

Standard-descripted)

Short duration of installation

Sensitivity to pulses.

The straight-drain section requires a more perforated and looser duct.

It's like a pyre, flow pulse.

(Previous 7-25D, post-2-5D)

Magnify square root error

04

APPLICATIONS

Application area

(DN500+)

Steam

Power plant water recycling

Condensers cycling water, cooling water, water piping.

Vapour measurement

Saturation/overheating vapour (with temperature reimbursement), power plant owner

Compressed Air

Air pressure main, workshop, gas, energy consumption.

Natural gas

Large-run gas transmission, urban gas networks

Drain it.

Water plant large caliber water distribution, water measurement

Fung gas.

Boiler flue, devulcanization, flue gas flow (large pipe)

Chemical processes

Process gases, liquids, vapour measurements

Metallurgy/heating

High-heavy wind, gas pipes, grid, central air conditioning, hot and cold water.

05

TECHNICAL SPECIFICATIONS

Technical specifications

A summary of the main technical parameters of the protection grade transvestite IP65 / IP67 typical flow range (liquid, DN100 ~ DN1200)

DN12001100~22000

  1. 01

    Note 25 ~ 5 or about 0.005 ~ 0.1

    The main piping, low-permit pressure on the wilbar, is only one-tenth of the perforation plate.

The core competitiveness of the event. The actual flow range is determined by the size of the probe, the differential variable range and the density of the medium.

Technical parameters · Parameter item / specificationCross-reference
Parameter ItemSpecifications
Applicable pipe pathDN50 ~ DN3000 (More)
Process medium temperature180 ~ 450 °C (by material and seal)
Accuracy class± 1.0% (fully marked); ± 2.0% (general)
Turndown ratio1:10 ~ 1:30
Flow velocity rangeGases 3 ~ 60 m/s; liquid 0.5 ~ 7 m/s; steam 5 ~ 60 m/s
Probe material316L stainless steel / Hapsy alloy / Monnar (in media)
Accompanying pressure transporter4-20mA HART, range 0~0.25 kPa ~0~100 kPa (modifiable)
Signal output4-20mA、HART、RS485(Modbus)
Technical parameters Common diameter DN / Flow range (m³/h, water)Cross-reference
Common Passage DNFlow range (m³/h, water)Common differential pressure ⁇ P (kPa)Pressure estimate (kPa)
DN15018 ~ 3600.25 ~ 5About 0.005 ~ 0.1
DN30070 ~ 14000.25 ~ 5About 0.005 ~ 0.1
DN800490 ~ 100000.25 ~ 5About 0.005 ~ 0.1
06

SELECTION GUIDE

Selection Guide

Five-step selection or French fixation+accumulator with low price compared to a pyrocardometer (larger ducts more economical)

Low2 Pyramids, low-pressure installation convenience, low-cost and low-resistance, inconvenient repair of 4 media and profile selected high-compulsive/crystalming media do not recommend blockable pressure openings5 Fragment deliveryers and compensates for the configuration of liquid measurement standard differential transmitters + calculator holes, with tens of times smaller, large-scale, and on-line plugging; 3. Precision requirements >±0.5% Trade settlements, with priority given to electromagnetic/turbo/super sound; Gases, vapours, must be compensated by temperature pressure; 5 High viscosity, crystallization, fibre-containing media not applicable.

· 2026 Summary of flow metering techniques . Verabar Flowmeterer . 6 chapters

  1. 01

    1 Clear media gas/liquid/vapour single phase, cleanliness

  2. 02

    2 determines the tube path DN50 ~ DN3000 large path priority

  3. 03

    3 Select installation Online insertion (ball valve)

  4. 04

    4 Probes, 316L/Haps alloy selected by medium

  5. 05

    5 spread transmitter Scale + temperature supplementation

  1. 01

    Remotely monitor the selection of the hint

    - Williab.

  2. 02

    Smart transducer HART+RS485+ Wireless Passages best suited to the large tube diameter, low allowable pressure, constant flow-repair, gas/liquid/sample sheet; and

Selective guide . Contrast / Wileybar (average speed tube)Cross-reference
ComparativeWileyba.Pyroscope (student)
PressureVery small (1% ~2% of the difference)Large (20% ~ 80%)
Precision±1.0%~±2.0%±1.0%~±1.5%
Straight-barring segmentFormer 7-25D, later 2-5DFormer 10~44D, post 5~8D
Installation overhaulOnline pluggedWe need to stop the flow and unload.
Selective guide · Contrast / WilibaCross-reference
ComparativeWiliba.Turbo Street.EMPLOYMENTUltrasound
Turndown ratio1:10~301:10~301:20~301:100
Selective guide · Contrast / WilibaCross-reference
ComparativeWiliba.Turbo Street.EMPLOYMENTUltrasound
Precision±1.0~2.0%±1.0~1.5%±0.5%±1.0%
Online plug-inSupportNot supportedNot supportedOut-of-box support
PriceLowMediumMedium HighHigh
MountingApply sceneAdvantagesDisadvantages
Frank fixed.GeneralIt's simple, it's high.Interrupted installation overhaul is required
Selective Guide · Media Type / Recommended ConfigurationCross-reference
Media TypeRecommended ConfigurationKey considerations
Vapour (saturated/overheated)High temperature probe + temperature compensation + builderHigh temperature pressure, condensers, heat companions
Natural gas (large pipe)316L probe + Multivariant Transmitters + Flow ComputerTemperature compensation, compression factor
Chemical Corrosion mediaHaq Alloy/Monnell DetectivePreservative, isolation fluid
Selective Guide · Apply scenes / Recommended configurationCross-reference
ApplicationsRecommended Configuration
Gas measurementFragmenter + Pressure/temperator + amplifier (temperature reimbursement)
Gas trade measurementMultivariant Transmitter + Flow Computer (AGA-3)