PRODUCT TECHNOLOGY

- Isolating heat and electrical resistance.

Operating principle

- Thermal resistance. - The working principles.

The electrical resistance of most metal conductors increases with temperature and shows good linear relationships within a given temperature range. ITS-90 provides for the use of standard platinum resistors as interpolators between: -259.35 °C and +961.78 °C. Pt100 In the 0 ℃ Time Interception is 100 The temperature characteristic of the platinum resistance is similar to: R(t) = R(R) 0 ) · [ 1 + At + Bt² + C( t-100 )·t³](t< 0℃ ) of which A = 3.9083 × 10 ³/℃,B = -5.775 × 10 ⁷/℃,C = -4.183 × 10 ¹²/℃,α = 0.00385 To standard platinum-temporium.

  1. 01

    2 Lines . The instrument is only 2 threads . It does not remove electrical resistance from the circuit . Short distance / high precision requirements

  2. 02

    3 Lines . Instrumentation 3 wiring, 1 power source + 2 sampled . Compensable but incomplete wiring electrical resistance ..the most common use of mainstream industrial sites

  3. 03

    4 Wire 4 root bar, 2 root current + 2 root voltage Complete elimination of lead lines and exposure resistance High-precision measures, metering rooms

  4. 04

    • In situ temperature ⁇ Pyramid resistance ⁇ Electrical resistance values vary with temperature

Support for thermal resistance of the insulation

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
· Technical Note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, the technical features and selection elements of the insulation heat resistance are understood.

01

TECHNICAL GUIDE

Overview

(Exposion-ProofResistanceTemperature Detector, Ex-RTD) is the high accuracy of the blast-resistant thermometer table, with sensor elements using metal-resistant materials such as platinum (Pt100/Pt1000), copper (Cu50/Cu100) or nickel (Ni120) and shells using an implosive structure that meets the requirements of the GB 3836 series, allowing long-term work in hazardous areas containing explosive gases or vapours of IA, IIB, IIC.

Thermal resistance is at a low-moderate temperature compared to thermoelectric dolls. -200 ~ +850 ℃ higher measurement accuracy (up to maximum ±0.1 ℃ (b) and better stability, so that there is no substitute for high precision industries such as petrochemicals, pharmaceuticals, semiconductors, etc. The implosion-type shell is granted a safe use permit in the hazardous area.

It started in the last century. 60 The European and American petrochemical industries' explosive hazard zone measurement needs, which have been going through different stages of casting aluminium, steel plate welding, stainless steel shells, etc., are now being mainstreamed into forming aluminium or precision casting stainless steel structures, combined 2 / 3 / 4 Lined bar and IEC 60751 Standard platinum resistance, which forms a modern and well-developed industrial-level insulation thermal resistance system.

Main technical characteristics

Explosion-ProofRTDSummary

General description · Serial number / CharacteristicsCross-reference
Serial numberCharacteristics
1Measurement accuracy is extremely high: Pt100 can be up to ± 0.1 °C (1/3 DIN B)
2Long-term stability is good: annual drift ≤ 0.05 ℃, much better than the thermoelectric doll
3Temperature range moderate: -200 ~ +850 ℃, covering medium to low temperature mainstream
4Linearity good: Pt Resisting Temperature close linearity, simplified secondary instrument
5High-detonation level: meet Ex d IIC T6 Gb (hydrogen-grade blast protection)
6Anti-disruption power: 3/4 wire automatically eliminates wire-based electrical resistance error
7Good switching: standard connector boxes, process connections, replacement maintenance convenience
8Extended Communications: Package Transmitters Support Hart / MODBUS / PROFIBUS
02

MEASUREMENT PRINCIPLE

Operating principle

2.1 Metals ' resistance temperature characteristics

The overwhelming majority of metal conductors increase with temperature and show good linear relationships within a certain temperature range. The ITS-90 provides that: -259.35 °C to +961.78 °C is used as a standard platinum resistor thermometer for interpolation.

Pt100 In the 0 ℃ Time Interception is 100 The temperature characteristic of the platinum resistance is similar to: R(t) = R(R) 0 ) · [ 1 + At + Bt² + C( t-100 )·t³](t< 0℃ (hours)

is the standard platinum resistance temperature coefficient.

2.2 Litigation and compensation for errors

2.3 Interruption doctrine (GB 3836.2)

The blast-proof theory of the blast-proof electrical equipment is based on the "frozen-out" theory.

When the explosive mixture within the equipment is ignited by electric sparks or high temperatures, the flames and high temperature gases generated by the explosion can be transported out through the blast gap between components, but the gap structure (platform / cylinder / screw) can effectively cool the flames below safe temperatures, thereby preventing the explosion from spreading to the outside environment.

Key parameters for the blastproof interface

1 Gap ≤ 0.2 mm (IIC); 2 Valid rading length ≥ 12.5 mm ; 3 Surface roughness Ra ≤ 6.3 μm; 4 Tight bolts meet the pine-proof requirements.

2.4 Workflow

Explosion-ProofRTDSummary

Measurement formulaClick to see the big picture
R(t) = R(0) · [1 + At + Bt2 + C (t-100) t3 (t<0°C)
Measurement formulaClick to see the big picture
of which A = 3.9083 x 10 3/°C, B = -5.775 x 10 7/°C, C = -4.183 x 10 12/°C, α = 0.00385
Motion of work · Linear / StructureCross-reference
LineStructureCompensation for errorsApply scene
2 LinedThe instrument is only connected to 2 linesIt's not going to eliminate the electrical resistance.Short distance / high precision requirement
3 Linedinstrument to connect 3 wiring, 1 power + 2 root samplingCompensable for wire resistance but incompleteMost commonly used at mainstream industrial sites
4 Linedinstrument to connect 4 wiring, 2 currents + 2 voltageComplete elimination of lead lines and exposure resistanceHigh-precision measures, metering rooms
Motion of work . Step / ActionCross-reference
StepsActions
①In situ temperature ⁇ Pyramid resistance ⁇ Resistion values change with temperature
②Measuring the bridge output of a nanovolt signal, poaching through 3/4 wires.
③Linear processing of transmitters converted to 4-20 MA current signal
④Signal sent to DCS / Numeric Table Shows temperature and participation in control
⑤If the temperature is above limit, Zoom in, trigger the sound light alarm + lock the car.
⑥If platinum is blocking the circuits / Short circuits / Trigger the dot protection logic
⑦The containment shell continues to withstand internal blast pressure.
03

PRODUCT STRUCTURE

Product structure

3.1 Main structural components

3.2 Thermal element type

3.3 Output mode

Explosion-ProofRTDSummaryExplosion-ProofRTDSummary

Analysis of strengths and weaknesses

4.1 Main advantages

4.2 Main shortcomings

Explosion-ProofRTDSummary

Sensing element

Functional description: Pt100 / Pt1000 Pept. Resisting temperature Common mass/specification: thin film / pept.

Insulation rack

Functional description: fixed electrical resistance, insulation electrical isolation, commonly used materials/specifies: high pure aluminium oxide / cloud mammoth

Inline

Functional description: EPRs are brought out to the end of the line, commonly used materials/specifiers: nickel chromium / silver-plating copper / pure nickel

Metals.

Functional description: Air-conservation, oxidation, pressure resistance Usual material/specifiers: 316L / 310S / Inconel 600

Insulation Fill

Function description: Thermal conductor + insulation + earthquake resistance Usual materials/specifiers: Aluminium oxide powder / magnesium oxide powder

- The blast seal.

Functional description: Cable introduces blastproof seals Usual material/specifiers: Detonated fillings / Sealed links

Detonating wire box

Functional description: cold end compensation, signal transfer, common materials/specification: clased aluminium / stainless steel

Connector End

Functional description: Compensatory guide access Usual material/specifiers: ceramic endpoint / nickel plating copper endpoint

Process connection

Functional description: Installed in pipe / packagings Common materials/specifications: screws G1/G2, Frank DN25 ~100

Deck / Warning

Functional description: blast-proof signs, security warnings Common material/specify: stainless steel / aluminium alloy

Type

Name of component: Structural characteristics Functional description: temperature range Usage/Specific: applicable scene

I'm not gonna let you go.

Widget name: Pt membrane deposition ceramic base, small size Function description: 50 ~ +400 ℃ Usual material/specification: Respond to speed, mass production, ordinary precision

Tire-wire platinum resistance.

Name of component: Plumbs around clouds or ceramic skeletons, high accuracy Functional description: 200~ + 850°C Usual material/specifiers: high accuracy / industrial site

Ceramic platinum electrical resistance

Name of component: Pt Threaded to Aluminium Oxygen, Solid Durable Description: 200~ + 850°C Usage/Specific: Main/High Reliability on the Industrial Site

Glass platinum electrical resistance.

Name of component: Pt Thrust in glass tube, Chemical Inertity Functional description: 200 ~ +500 ℃ Common Materials/Specific: Medicine / Food Hygiene Level

Platinum blockage.

Name of component: Monopoly Peptunes + stainless steel protection tube Functional description: 50 ~ +250 ℃ Usual material/specify: surface temperature measurement

Platinum resistance.

Name of component: ceramic electrical resistance + metal assembly integration Function description: 200 ~ +600 ℃ Common Materials/Specifics: Curve installation / High Pressure

Output Type

Name of component: signal form Functional description: load capacity Usual material/specify: typical application

Resisting signal.

Name of component: Pt100 Direct electrical resistance 18.52~390.48 times Function description: non-sourced Usage/Specific: Number of Tables / Control System Direct Access

A second-line system 4 - 20 mA

Name of component: Ringed power supply Functional description: RL ⁇ (V-12) / 0.02 Common Materials/Specifics: Mainstream Industrial Site

Four-lined 4-20 maA

Signal form: independent power circuits Load capacity: RL ≤ 600 times

Hart Protocol

Signal form: 4-20 MA+ numeric two-way load capacity: need hand-manufacturing typical application: parameter remote grouping

MODBUS RTU

Signal form: RS-485 Digital communications Load capacity: maximum 32 nodes Typical application: multiple instrument network

Field bus FF / PA

Signal form: bus-type essential security Load capacity: inherently safe environment Typical application: chemical DCS integration

1

Advantages: very high measure accuracy: ±0.15 °C (0 °C) at Pt100 A level, much higher than the thermoelectric doll

2

Advantages: good long-term stability: annual drift ≤ 0.05 ℃, without frequent calibration

3

Advantages: good linearity: Pt Resisting temperature properties close linearity, simple secondary instrument

4

Advantages: good interchangeability: the fraction of the same fraction is interchangeable without re-marking

5

Advantages: Strong resistance to interference: 3/4 threads eliminate electrical resistance errors in the line

6

Advantages: High-integral: meet Ex d IIC T6 Gb (hydrogen-grade blast protection)

7

Advantages: Refining end does not require cold end compensation: cold end error is avoided compared to thermoelectric dolls

8

Advantages: Standard signal: Pt100 is an international standard IEC 60751, excellent interchangeability

9

Advantages: Good compatibility: Direct connection to multiple displays, recorders, PLCs

Disadvantages and use restrictions

1

Disadvantages: Lower temperature upper limit: maximum 850 °C, inability to measure higher temperature

2

Disadvantages: Slower response: metal condoms lead to high heat inertia, response time 3-30 s

3

Disadvantages: low resistance to shock: shock-resistance of temperature elements, careful transport installation

4

Disadvantages: Higher prices: Pt Material costs are much higher than the thermoelectric doll wire

5

Disadvantages: Need to stimulate currents: need to stabilize currents and avoid heat errors

6

Disadvantages: Lead cost: 3/4 line compensation guide is more expensive than 2 line 30 ~ 50%

7

Disadvantages: Large size: the total size of the shell is larger than normal thermal resistance

8

Disadvantage: Maintenance difficulties: damage needs to be replaced and the site cannot be repaired

9

Disadvantages: Not applicable in the context of a strong shock: Vibration environment easily leads to platinum-lace fractures

04

APPLICATIONS

Application area

The following conditions are widely applied because of the high accuracy and safety of the combination:

5.1 Typical application cases

Catalysing fission reactor for a large refinery

Temperature 480 ~ 520 °C, medium is catalyst powder oil, measured with a temperature accuracy of ± 0.5 °C using Pt100 ceramic element + blastproof wire box structure;

Some LNG Repository Storage

-162 ℃ deep cold temperature monitoring using Pt100 thin film element + stainless steel shield + Hart carrier, 1 year warm ≤ 0.1 ℃;

VCM Reactions for a chemical plant

Temperature 50 ~ 80 °C, vinyl chloride-flammable explosive medium, with a Pt100 + Ex d IIC T6 blastproof shell with safety fences;

x pharmaceutical plants freeze dryers

-40 ~ +50℃ accuracy temperature control using a four-line Pt100 + blastproof integrated carrier to control temperature accuracy ±0.3 ℃;

Methanol synthesis tower, a coal chemical company

Temperature 200 ~ 280 °C, medium containing CO/H flammable composite gas, using Pt100+Explosive shell + PROFIBUS-PA bus integration to DCS.

Explosion-ProofRTDSummary

Oil / Gas

Typical: Refining oil reactor, storage tank temperature, representing medium: crude oil, gasoline, diesel, liquefied gas

Chemical / petrochemical

Typical work: Reaction plume, distillation tower temperature control

Pharmaceutical/ Biological

Typical: fermentation tanks, fungicides, freeze dryers, representing mediums: pharmacological, cultured, purified water

Gas / LNG

Typical: LNG storage tanks, pipe temperature for media: natural gas, liquefied gas, light hydrocarbons

Coal-chemicals

Typical: Methanol synthesis, alkyl installation temperature, representing medium: synthetic gas, methanol, alkyl

Fine Chemical

Typical: dye, spice, paint production temperature for medium: organic solvent, dye intermediate

Fertilizer / Pesticides

Typical: urea synthesis, ammonium nitrate production temperature, representing mediums: ammonia, urea solution, ammonium nitrate

Food / Beverage

Typical: CIP Cleaning, Bacillus Fever Temperation, for media: Milk, Beer, Juice, Soy sauce

Electronic chemicals

Typical: high-purification reagent, semiconductor material temperature

Coal/ Mine

Typical: gas extraction, blast-proof electrical equipment temperature, representing medium: gas, coal dust

05

TECHNICAL SPECIFICATIONS

Technical Parameter Table

6.1 Complete machine parameters

6.2 Explosive-proof partitions and selected types

Explosion-ProofRTDSummaryExplosion-ProofRTDSummary

  1. 01

    Select Table

7.1 Naming rules

Typical naming rule

Exd-WZP-Pt100-316L-G1-1000-IP68-Hart

7.2 Recommendations for Common Models

Explosion-ProofRTDSummaryExplosion-ProofRTDSummary

  1. 01

    Selection Guide

8.1 Selective Steps

8.2 Typical Work Status Recommendations

8.3 Selective care

The Explosion-ProofRTSummary above is the summary of the complete technology for thermal resistance insulation. The actual selection should combine process parameters, medium properties, installation methods, blast-proofing partitions, life-cycle costs, etc.

Technical Parameter Table · Parameter Category / Parameter NameCross-reference
Parameter CategoryParameter NameSpecifications
Sensor typeSensor typePt100(α=0.00385)/ Pt1000 / Cu50 / Cu100 / Ni120
Temperature rangeTemperature range200 ~ +850 ℃ by widget and shield
Accuracy classAccuracy class1/3 DIN B ± 0.10 °C/A ± 0.15 °C/B ± 0.30 °C (0 °C)
Self-heating effectsSelf-heating effects≤ 0.05 ℃ / mW
QuoteQuoteLine 2 / 3 Line 4 (recommended 3 Line)
Metals.Metals.316L / 310S / 321 / Inconel 600
Insulation materialInsulation materialHigh pure aluminium oxide 99.5 % / magnesium oxide powder
Detonation sign.Detonation sign.Ex d IIB T4 Gb / Ex d IIC T6 Gb
Detonation levelDetonation levelMatch GB 3836.2 / IEC 60079-1
Ingress protectionIngress protectionIP65 / IP67 / IP68
Process connectionProcess connectionSnacks G1/G2, NPT1/2, NPT3/4, Frank DN25~100, card sets
Insertion depthInsertion depth100~3000 mm, custom
Response timeResponse Time t633~30 s (accumulation thickness of 3~10 mm)
Pressure resistancePressure resistance6.4 ~ 30 MPa (subject to condom specifications)
Ambient temperatureAmbient temperature40 ~ +85 °C (wirebox)
Environmental humidityEnvironmental humidity0~95% RH, no condensation
Insulation resistanceInsulation resistance≥ 100 M times@100 V (extremister for condoms)
Resisting voltageResisting voltageAC 500 V / 1 min
Anti-shock resistanceAnti-shock resistance10~30 g,10~500 Hz
Connect box materialConnect box materialAluminium / stainless steel / engineering plastic
Protect the tube's outer diameter.Protect the tube's outer diameter.Φ6 / Φ8 / Φ10 / Φ12 / Φ16 mm
ChiefChief200~3500 mm, custom-made
WeightWeight0.5 ~ 5 kg (depending on specifications)
Dangerous areaMedia existsSelection Recommendations
Zone 0 / 20Explosive gas / Disposed of persistentEx ia IIC Ga
Zone 1 / 21Normal operation may existEx d IIC T4 Gb
Technical Parameter Table · Hazardous Area / Existence of MediaCross-reference
Dangerous areaMedia existsSelection Recommendations
Zone 2 / 22An abnormally short time.Ex d / Ex e IIC
Under the coal mine.gas / dustMines-based Angular Exd I Mb
Technical parameter table . Part bit / codeCross-reference
PartCodeMeaning
1ExdExplose-Proof
2WZP / WZCPlatinum / Copper / Bronze / Bronze / Bronze
3Pt100 / Pt1000 / Cu50Speculation No. and 0°C labeled as resistance
4316L / 310S / Inconel600Metals, protective material
5ceramic / thin film / roundwireTemperature Component Type
6G1 / G2 / DN50 / CaratProcess Connection Specification
71000 mmInsert Depth L(mm)
83L / 4L3 Lined / 4 Lined
9IP65 / IP68Ingress protection
10mV / 4-20mA / Hart / MODBUSOutput Method
Technical Parameter Table . Serial Number / ModelCross-reference
Serial numberModelSpecifications DescriptionTypical applications
1Exd-WZP-Pt100-316L-G1-1 000-IP68-4-20mAPt100 / 316L / ceramics / G1 / 1m / 3 Line / 4-20mAFossilized reaction Zero
2Exd-WZP-Pt1000-310S-DN 50-IP67-HartPt1000 / 310 S / thin film / Frank DN50 / HartRefinery storage tank temperature
3Exd-WZP-Pt100-Inconel60 0-G2-1500-ExdIICPt100 / Inconel 600/ Tire / G2 / 1.5m / IIC T6Fine chemical solvent temperature
4Exd-WZP-Pt100-316L-M27 -800-4LPt100 / 316 L / M27 Carat / 0.8 m / 4 Line / High PrecisionTemperature of the pharmaceutical dryer
5Exd-WZP-Pt100-310S-G1- 1500-WirelessHartPt100 / 310S / G1 / 1.5m / Wireless HartLNG Canners Temperature Monitoring
6Exd-WZC-Cu50-316L-G1-1 000Cu50 / 316 L / ceramic / G1 / 1 m/ economic typeFertilizer urea synthesis temperature
7Exd-WZP-Pt100-Tiotium Alloy-G2-2000-PAPt100 / titanium alloy / G2 / 2m / PROFIBUS-PATemperature of chlor-alkali cells
8Exd-WZP-Pt100-316L - Health Level 2L-Tri-ClampPt100 / 316 L / Health-level Tri-Clamp / 2 / 4 - 20mAFood CIP Cleaning Temperature
Technical Parameter Table . Serial Number / ModelCross-reference
Serial numberModelSpecifications DescriptionTypical applications
9Exd-WZP-Pt100-Inconel60 0-G2-2500-BennanPt100 / Inconel 600 / G2 / 2.5m / BennenCoal mine gas extraction temperature
Technical parameter table · Step / Selective considerationCross-reference
StepsSelection
①Confirm temperature range: lowest / maximum temperature Selected fraction number (Pt100/Pt1000/Cu50)
②Confirm accuracy requirements: ± 0.1 °C to select 1/3 DIN B; ± 0.3 °C to select B
③Identification of the corrosivity of the medium: weak corrosive selection 316L; strong corrosive selection of Inconel 600/Hallium
④Determine liner: Normal 3 liner; High precision 4 liner
⑤Select process connection: screw / Frank / card / health level
⑥Determination of depth of insertion: by pipe length 1/3~2/3
⑦Select output mode: mV / 4-20mA / Hart / MODBUS / bus
⑧Determination of blast level: by hazard area (Zone 0/1/2) selected Ex ia / Ex d
⑨Select the protective level: IP65 / IP67 / IP68, dust by environmental humidity
⑩Accounting for life costs: integrated procurement + maintenance + security risks
Technical parameter table . Work / TemperatureCross-reference
WorkTemperatureMediaRecommended fraction numberRecommended blast-proofing level
Refinery reactor300~520Gas + CatalystPt100Ex d IIC T4
LNG storage tank162Liquefied natural gasPt1000Ex d IIB T6
PPVC Reaction Plan50~80VCMPt100Ex d IIC T6
Frozen dryer40~+50Medicine.Pt100 4 lineEx d IIB T4
Methanol synthesis tower200~280Synthetic GasPt100Ex d IIC T4
CIP Purge80~95AlkalinePt100 Health levelEx d IIB T4
Electronic chemicals20~+30Acetone/isopropanolPt100Ex d IIC T6
urea synthesis tower170~200urea + ammoniaCu50Ex d IIB T4
Coal mines, gas20~60gas / dustPt100Ex ia I
Reagent storage tanks10~+30Organic solventsPt100Ex d IIC T6
Serial numberAttention
1Temperature range should reserve ±10% surplus to avoid being in full range for a long period
2Select 4-line system when precision is high + A or 1/3 DIN B
Technical parameter table · Serial number / AttentionCross-reference
Serial numberAttention
3Inconel 600 / Haq Alloy protection should be preferred for the strong corrosive medium
4The selection of Pt1000 at low temperature depth colds (< -100°C) can provide a higher sensitivity.
5Self-heating error is not negligible: Incentive current ≤ 1 mA appropriate
6The wiring box should be protected by a level of protection on the ground.
7The hazard area must be strictly GB 3836 selected and verified for blast control certificates.
8Periodic calibration: recommended standard resistance ratio for every 6-12 months
9Transport installations need to be particularly targeted: pelicans are vulnerable to break-ups and fall-off is avoided
10In a strong vibration, it's recommended that the earthquake-proof stairwell be added or that the stub structure be selected.