PRODUCT TECHNOLOGY

Switch input, relay output fence-SA6120

Operating principle

Switch input, relay output fence-SA6120 .

Switch input, relay output barrier SA6120 works around the three links "NAMUR distribution and signal detection on the side of the scene isolated transformation control relay feed". This section is based on the three angles of "Standing control inside the fence" and concludes with four key calculations of the project "NamUR standard determination + 8 V/ 8mA distribution principles + the end-of-life curve of relays + failure diagnosis and power failure safety". The site side consists of two tasks of the essence: the NAMUR distribution and signal detection. NAMUR distribution follows IEC 60947 - 5 - 6 Standard - 1 8 V voltage distribution: typical open-circuit voltage 8 V DC, by internal fence DC

  1. 01

    2 Internal fence: DC/DC floating + Isolation transformer + MMU logic fence is composed of four parts: 1 DC/DC floating power source - 24 V-Float 8 V-output power supply,

  2. 02

    Self-recovered) to transfer side energy/sign to control side, quarantined and resistant.

  3. 03

    Accomplishing Ben-Ancade; thorium

  4. 04

    ③ 1500

Switch input, relay output fence-SA6120 option support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Switch input, relay output fence-SA6120 Technical Note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, learn about switch input, technical features and selection points of the relay output fence-SA6120.

01

TECHNICAL GUIDE

Overview

1.1 Product definition and attribution

Switch input, relay output fence SA6120 (hereinafter referred to as "the switch input fence SA6120" or "DI separation fence") is installed in the safe zone control room equipment (DCS/PLC digital input card, relay input panel, counter input panel)

The inherently safe interface with the field switch equipment in the hazard area (NAMUR approach switch, limit switch, flow switch, liquid level switch, button) has four tasks: on-site side distribution and signal detection (NAMUR8V/8/mA), control side isolation (anti-disruption), relay feeder output (SPT/DPDT), failure diagnosis (breathline/short circuit/out of power).

In the Industrial Process Automation Pyramid, this fence is located on the field equipment floor (NAMUR approach switch/limit switch)

Between the control layer (DCS/PLC), the core member of the "Closure Input " of the Backway Interface family. Its "NAMUR Standard Distribution + Relay Point Output" is the product's signature characteristic - the distribution of 8V/8mA strictly follows the IEC 60947-5-6 (NAMUR) standard, which directly drives DCS 24V digital volume input or external intermediate relays, and the fail-safe mode ensures a safe response of the SIL grade lockback circuit in case of power failure.

1.2 Family division of labour

1.3 Three paragraphs of the development history

(1) Direct period of relays (1980)s

The on-site switch signal is delivered through the long cable directly to DCS input cards, without isolation and without restriction, and is only applied to simple applications in non-hazardous areas or cable lengths < 100 m.

(2) Zina Fence Period (1990s~2000s)

Use the Zina 2-Code limit plus level-to-place to achieve Ben-Ann, and require grid-to-wire resistance. ≤ 1 Applications are limited once and cannot be used in situations where there is a ground failure of electricity.

(3) Detonator isolation period (2010s~)

DC/DC floating + isolation transformer + intelligent limit, no equivalent level of electrical access requirements, and significant increase in reliability; NAMUNE 044 (IEC 60947-5-6) standard harmonization 8V/8mA distribution, 1.2 MA effective threshold, mainstream manufacturers such as P+F KFD2-SR2-Ex1.W, MTL 3300/4500, PR electronics

  1. 01

    Shenzhen News SA 6120, Nanjing Yu, SC9100, Shanghai and Shanghai, GS8572, among others, have launched representative products.

1.4 Relationship to Part 64/71/73/74

Title 64, Separated Safety Fence, is a generic overview covering all categories of detection end, control end, temperature end, switch end; Part 71, Input Detection Screech, is the depth of its 4-20mA input detection branch; Title 73, "Schemble RTD/TC separation fence", is the depth of its "temperature programmable" branch; Title 74, Switch Quantities Output Fence, is the depth of the branch of its "Trash Quantities Output End NAMUR12V/45mA" branch;

This is the depth of the relay output of its switch input end.

Five forms a generic "general detector temperature output input "five track:64 for "doing everything" generic project; 71 For "Separating + Measuring" carrier circuits; 73 For "Unable input + remote group" temperature circuits; 74 For "12V/45mA Ben-Ann drive" switch output circuits; This is for the "NAMUR/Drypoint ⁇ Relay Points" switch to enter the circuit.

General · Membership / DutiesCross-reference
MembersDutiesCorresponding scene
Switches input barrier SA6120 (This article)NAMUR/Drypoint Zoom Zoom Relay point outputNAMU Approach Switch / Limit / Flow / Liquid Level Switch
Part 64 Segregated Security Fence (General-Present)Cover all items of detection/control/temperature/maskGeneric project type-selection
Part 71 Input detection fence (4-20mA)Specialise in second-/ fourth-line transvestite 4-20mA input testingSecond-line transmitter distribution + detection
Part 73 Programmable RTD/TC Separation FenceRTD/TC altruistic input + remote groupingMultisensor Mixer + Retrofit
Part 74 Switch Output Separation Fence (12V/45mA)DCS switch signal ⁇ 12V/45mA Ben-Ann driveNAMUR field device driver/ alarm/ electromagnetic valve
Zina security fence (alternative)Zina D.C. + P.O.T.Traditional programmes, with reliable land-based systems
02

MEASUREMENT PRINCIPLE

Operating principle

The main working method of switch input, relay output fence SA 6120 is to operate around the three links of "Namur distribution and signal detection on the side of the scene, isolation transformation, control of side relay feeder output". This section is based on the three angles of "Standing control inside the site fence" and concludes with four key calculations of the project "NamUR standard criteria + 8V/8mA distribution principles + the end curve of relays + failure diagnosis and power outage safety".

2.1 On-site side: NAMUR distribution and signal detection

The field side consists of two essentially related tasks.

NAMUR distribution and signal detection. NAMUR distribution follows IEC 60947 - 5 - 6 Standard - 1 8 V voltage distribution: typical open-circuit voltage 8 V DC, supplied by internal DC/DC floating power sources; ② 8 MA Short-circuit currents: Maximum output currents at the end of the field cable short-circuit fence to ensure that the limited energy meets the requirements of this environment; ③ 1.2 MA Valid threshold: Resume circuit current > mA after on-site equipment trigger (NAMUR approach switch conduit) and fence ends determined to be "valid" 1 ")"; ④ 1.0 mA Invalid threshold: Field device does not trigger (NAMUR close to switch cut) circuit current < 1.0 mA , the fence is declared invalid () 0 ")"。

The core of signal detection is "electric current monitoring + threshold determination" -- inside the fence, circuital currents are monitored by sophisticated sample resistance, comparing to 1.2 ma threshold, output "switch logic" to subsequent relay-driven circuits.

  1. 01

    2 Internal fence

    DC/DC floating + quarantine transformer + CMU logic fence is composed of four parts: 1 DC/DC floating power source - 24 V-Float 8 V-output power supply,

(b) Avoiding the introduction of road back-to-ground interference; 2 NAMUR distribution circuits - 8 V/ 8mA Flow-restricted circuits (with Xinau + restricted flow IC + logical controls) - execute threshold determination, backjump ( 10 ~ 50 ms shivering, failure diagnosis, relay drive.

The failure diagnostic circuit continuously monitors circuital currents and identifies three states.

"Effective" (1.2~8 MA, NAMU normally channel), "disconnected" (< 0.1 MA, circuit break), "short circuit" (>6 MA, circuit short or site equipment failure), diagnostic results driving LED instructions and fail-safe relay output.

2.3 Control side: relay point output + status indicator

The key to the control side is to convert the switch logic from internal processing of the fence to the relay feeder.

1 SPDT Junction (one knife toss) - 1 Public + 1 Open (NO) + 1 (b) A constant closed (NC), NO closed and NC disconnected when active on site; NO Disconnected, NC closed when the site is not valid; 2 DPDT Junction (two-slash) - 2 (b) A separate SPDT, capable of switching the two-way control signal simultaneously; 3 Points capacity — typical 250 V AC / 2 A or 30 V DC / 2 A Resistible load, sensor load reduction (detailed § 2.6 Nodal point life curves; 4 Mechanical lifetime - 10⁷ (a) Number of times (no load); 5 Electrical lifetime - 10⁵ Number of times (full load); 10 (half-load).

2.4 Critical calculation (i) - NAMU standard judgement

Engineering experience

The NAMUR standard 1.2 mA valid threshold corresponds to the typical 8.2 k load match; Both below this value (high resistance) or above 6mA (low resistance) triggers a failure diagnosis, and the project acceptance requires a "validity/invalidity/disconnection/short circuit" four-state current.

2.5 Critical computing (ii) - 8V/8mA power distribution rationale

Po = Uo x Io / 4 = 8 x 8/4 = 16 MW is the "very low power" (linear source) default energy formula; (a) Co/Lo is larger (6.0 μF/100 mH) and makes SA6120 applicable to the "long cable" scenario (the cable can be up to 1-2 km); Ro = 1,000 equal internal resistances of much higher than 267 of the 12V/45mA output, which is a "voltage" distribution feature.

2.6 Critical computing (iii) - a life curve of relay points

Engineering experience

(a) Sensual load (L/R > 40 ms or cos < 0.4) shall be added to RC absorbent circuits or re-continue diodes, otherwise the point life will be reduced to less than 1/3; The shock loads such as electric/light bulbs are recommended to be replaced by intermediate relays (above 10 A), with the fence end performing only "sign drive" tasks.

2.7 Critical calculations (iv) — failure diagnosis and electrical failure safety

SIL level circuits must select the safe mode of failure - Cable power outage or flaring failure, DCS reading "logic 0" or "facing", trigger safety locks;

The safe mode of access is used only for "power loss" actions such as fire spray, wind, etc., is a special scenario in the direction of safety.

  1. 01

    Self-recovered) to transfer side energy/sign to control side, quarantined and resistant.

  2. 02

    Accomplishing Ben-Ancade; thorium

  3. 03

    ③ 1500

  4. 04

    (b) Separators - power sources Vrms;

  5. 05

    + ④

  6. 06

    Signal shared magnetic core, MMU

Motion of work . Status / Power flow thresholdCross-reference
StatusPower flow thresholdPower thresholdMeaning of the judgement
Active status ("1")I > 1.2 MA (typical > 2.1 MA)U > 6 VOn-site device trigger; DCS reading "Logical 1"
Invalid status ( "0")I < 1.0 MA (typical < 1.2 MA)U < 5 VField device not activated; DCS reading "System 0"
Open-circuit detectionI < 0.1 mAU ⁇ 8V open circuit voltageCable breakers; trigger failure alarms
Motion of work . Short-circuit testing / I > 6 MACross-reference
Short-circuit testsI > 6 mAU down to ≤ 1 VCable short circuits or site equipment failure
NAMUR NE 044IEC 60947-5-6 standardElectricity 8V/8mABeneon Certification Core Constraints
The working principles . Parameters / SymbolCross-reference
ParametersSymbolTypical valueEngineering
Open the circuit.Uo8 V (typical 8.2 V)The voltage of the live cable when it's empty.
Short-circuit currentsIo8 MA (typical 8.2 MA)Maximum current during short circuits of live cables
Maximum PowerPoPo = Uo × Io / 4 = 0.016 WBenz limit (linear source)
Maximum capacitorCo≥ 6.0 μF(IIC T4)The cable on the ground allows the total capacity.
Max.Lo≥ 100 mH(IIC T4)The cable on the ground allows for total telemetry.
Equivalent IntractRo = Uo/Io1000 ΩLimiting the curve slopes of the contour
Effective thresholdI_th1.2 mANAMUR standard effective current threshold
Modus operandi . Load type / Load currentCross-reference
Load TypeLoaded currentElectrical lifeReduction factor
Retardation load 250V AC2 A10⁵ operations1.0 (full load)
Retardation load 30V DC2 A10⁵ operations1.0 (full load)
Sensory load 250V AC2 A cosφ=0.45×10⁴ times0.5 (Decrease 50%)
Sensory load 30V DC L/R=40ms2 A3×10⁴ times0.3 (decrease 70%)
Electric loadStart current 6xIn2×10⁴ times0.2 (Severe decrease)
Light bulb loadStart the current 10xIn.1×10⁴ operations0.1 (most harsh)
Dry Point Zero LoadMiA Level10⁷ operations (mechanical life)1.0 (mechanical limit)
Motion of work . Mode / Logical directionCross-reference
ModeLogical directionPower outagesApply scene
Power outage safety (standard)On-site trigger, retort inhaling.Power loss, relay release (NC closed)SIL Level / ESD Emergency Parking
Power security (special)On-site trigger, removable release.Power loss Relay Suction (NO closed)Fire Spray / Ventilation System
Disorder diagnosisBreaking wires/short circuits.The failover relay. NC, close the alarm.Key valve / alarm inspection
03

PRODUCT STRUCTURE

Product structure

Switch input, relay output barrier SA6120 consists of "Physical Layer 10 Component + Software Layer 10 Module".

The physical layer provides the material base and the software layer provides the intellectual and compliance capability.

3.1 Ten components of the physical layer

3.2 Ten modules on the software floor

3.3 Five-type morphological distribution

1. Shells

Core component / Specification: PA66 Flame Retardation / DIN 35 mm track Function description: Mechanical Intensity + Flame Retardation UL94-V0

2. Connector end

Core component / Specification: Power + On-site + Control side relayend Functional description: colour coding distinction; 2.5 mm² screwdriver

3. DC/DC floating power

Core component / Specification: 24 V ⁇ Floating Land 8 V Functional description: floating side working power

4. NAMUR distribution circuit

Core component / Specification: 8V/8mA Flow-restrictive Capability Description: Benaming + signal detection integration

5. Truncated current sampling resistance

Core component / Specification: Precision 100 Functional description: Backway current detection feedback

6. MMU+ Watchdog

Core widget / Specification: ARM Cortex + Self-inspection Functional description: threshold determination + inverted + failure diagnosis

7. Separators

Core component / Specification: Power + Signal Shared Magnetic Core Function Description: Isolated Pressure 1500 Vrms / 2500 Vpk

8. Relay drive

Core element / Specification: Dalington tube + Resume diode functional description: relay wire drive

9. Relay points

Core widget / specification: SPDT or DPDT functional description: control side output point

10. Status Directives LED

Core component / specification: Power / Trigger / Fault / Status Description: Field debugging visualization

Module

Core component / Specification: Function Description: Achieving Technology

1. Crises determination

Core component / specification: NAMU 1.2 MA Effective threshold Description: Hardware Compatible + MMU

2. Counter-jump filters

Core widget / Specification: 10~50 ms Vibration Resistance Function description: Digital filter; close to switch vibrating

3. Logical control

Core component / Specification: positive/anti-logically programmable Functional description: power loss security / power security switch

4. Disorder diagnosis

Core widget / Specification: Breakline / Short circuit / Power Deactivation Functional Description: NAMUNE 43 / NE 107

5. Fault locking

Core component / specification: failure to manual reset functional description: SIL required to return

6. Status indicators

Core component / Specification: LED display power/trigger/fault Description of function: two colour LED / multicolor LED

7. Self-checking function

Core component / Specification: EMP + Periodic Self-censorship Functional description: IEC 61508 SIL requirements

8. Retrieving of malfunctions

Core Component / Specification: Manual / Automatic / Power Restart Functional Description: User-Assemble

9. Communications interface

Core widget / Specification: HART / Modbus / Keys Functional description: Remote grouping (high end type)

10. Relay life management

Core component / Specification: Count of the number of points of action Functional description: Precautionary maintenance alarm

Form

Core component / specification: number of channels Function description: output form, representative machine type / scene

Tight Single Channel

Core Component / Specification: 1 Functional Description: 1 x SPDT Relay SA6120 / Key Single Point Valve Feedback

Two channels stand alone.

Core Component / Specification: 2 Functional Description: 2xSPDT Independent Relays Redundancy / Master Feedback

8 High density of channel

Core component / Specification: 8 Functional description: 8xSPDT Relays High density collection for small and medium items

16 Access bus power

Core component / specification: 16 Functional description: 16xSPDT relay Power Railway bus / large project

Field installation model

Core component / Specification: 1~2 Functional description: IP65/IP68 shell Field bus distribution deployment

04

TECHNICAL GUIDE

Advantages and disadvantages

4.3 Enter the hidden trade-off for the vs export fence

Switch input fence (in this section) and 74 Switch output fence are twin brothers -- input fence: live signal ⁇ secondary relay feed (collect) side of control room output: control room side switch signal ⁇ side side of the scene

12V/45mA Ben-Ann-driven (control) this difference in direction determines the engineering trade-off between the two:

Power distribution direction

Input fence "on-site side power supply" (8V/8mA distribution to NAMU near switch), output fence "on-site side drive" (12V/45mA drive-by-side plant);

②

Capability position

The input fence limits can be used in the distribution circuit, while the output grid limits can be used in the drive circuit; 3 Output Form: Enter fence "relay interface" (separation + arbitrary voltage compatible), output fence "NAMUR standard 12 V/ 45mA " (Ben-Ang-Driving Standardization).

4.1 Eight major strengths

NAMUR Standard Distribution

Advantage: 8V/8mA standard distribution + 1.2 MA threshold determination

Ben's energy limit.

Advantage: Electronic limit flow + Triple protection from re-insure

Unequal level of power.

Advantage: transformer separation separates the site from the control side. ≤ 1 Ω)

Relay Output

Advantage: Dry point output compatible with any voltage level 24 V)

Power outage safe.

Advantage: SIL grade return sign with power loss security mode

Disorder diagnosis

Advantages: breakwire/short circuit/power loss autodiagnosis

Long cable adapts

Advantages: Co ≥ 6.0 μF / Lo ≥ 100 mH Comparative object: Short cables 12 V/ 45mA Driver

Visualize Points

Advantages: LED + Relay Feedback Intuitively contrast objects: no indicator light type

Disadvantages

Limited life of the point

Disadvantage: Loaded 10⁵ times, sensor load down to 10⁴ Response strategy: Sensory load plus RC absorption; Intermediate relay extension

Response time is limited

Disadvantage: Inverted jump + fail detection 10~50 ms coping policy: fast process object select short or no backtick

Node capacity limited.

Disadvantage: Typical 250V/2A, beyond the need for intermediate relays Response policy: large current loads of intermediate relays

Long cable reserves are limited.

Disadvantage: Co/ Lo determines maximum cable length Response policy: by cable parameter; long distance selection high Co/ Lo type

Extremely restricted.

Disadvantage: NAMU is only 2 lines; dry point polar freedom policy: selection of NAMU/ dry point type by field device

Point-to-point sticky risks

Disadvantages: Large current glue leads to point failure

Higher unit price

Disadvantage: NAMU + Benan + Segregation + Multivalidation of Relays Response: High Retrieval Key; Normal Limit Deductible

05

APPLICATIONS

Application area

5.1 Six Typical Applications

5.2 Detonation of blast-proof partitions

5.3 Overview of industry distribution

Switch input, relay output fences, by industry distribution, generally present " petrochemical 30% + gas 25% + chemical 20% + electricity 10% + pharmaceutical/food 10% + other 5% " . Petrochemicals and hydrocarbons are the "two main battles" with the former focusing on the response valve limit plus ESD emergency cuts, and the latter on the long pipeline valve plus tank fluid switch; (a) The chemical industry ' s high level of consistency with the NAMUR standard;

The electricity sector has sustained demand for water-flow switches + power outage safety models.

Refining Reaction Valve Limit

Target detected: NAMU near switch (switch/switch feedback) Key function of this fence: NAMU distribution + relay output + power outage security

Gas line ESD emergency. Cut the valve.

Target detected: Reverted spring valve feedback limit key function of the fence: SIL3 + power loss security + failure diagnosis

Cannery liquid table switches

Target detected: sound fork / float / radar fluid table switch Key function of this fence: NAMUR distribution + relay output + blast protection

Power plant boiler for flow switches

Targeted object: Target / Pistol flow switch Key function of this fence: NAMU + fail diagnosis + long cable

Pharmaceutical Clean Zone Limit

Target detected: Sanitation NAMUR approach switch key function of this fence: NAMU distribution + power outage safety + HART inspection

Renovation/reducing of stocks

Target detected: Multi-plant switch equipment mixer project Key function of this fence: NAMU standard + remote grouping + spare parts are small

Explosive-proof partition

Target: Media category Key function of this fence: Authentication requirements

Zone 0

Target detected: IIA / IIB / IIC T4~T6 Key function of this fence: ia (highest security) [Ex a Ga] IIC T4~T6 Ga

Zone 1

Target detected: IIA / IIB / IIC T4~T6 Key function of this fence: ib level [Ex ib Gb] IC T4~T6 Gb

Zone 2

Target detected: IIA / IIB / IIC Key functions of the fence: iC level or non-incorporated blast prevention [Ex ic Gc] IC or non-explosive type

21/22 Dust in Sector

Target detected: Dust environment Key function of this fence: DIP A/ B level [Ex iAD] or DIP authentication

06

TECHNICAL SPECIFICATIONS

Technical Parameter Table

6.1 Generic versus precision horizontal comparisons

6.2 Passage density and power supply

6.3 Field side input parameters

6.4 Control side output parameters

  1. 01

    Select Table

7.1 Eight-bit selection table

7.2 Example of option (i) — calibration response silo-limit feedback

7.3 Example (ii) - Hydrocarbon and Gas Line ESD Emergency valve cut

7.4 Example (iii) - tank liquid-bit switch alert

7.5 Example (iv) — pharmaceutical clean zone limit switches

  1. 01

    Selection Guide

8.1 Six-step selection

8.2 List of eight typical pits

8.3. Fourth category acceptance chain

The primary switch input, relay output barrier SA6120 is the "site switch signal-taking gate" of the industrial process-based blast-proof system, which carries the "NAMUR standard distribution (8V/8/mA) + signal detection (1.2 MA threshold) + energy limitation + isolation + output of relay electrical interface + fault diagnosis" six-factor coupling tasks. This book is organized around the product pattern of the output of the SA6120 typical 1 channel + 1 road SPDT relay, comparing the 64 / 71 / 73 / 74 General/Detect/ Temperature/Output Type IV, clarifying the division of the product group "Input vs General Type vs vs Testend vs temperature end vs switch output end";

Key engineering issues such as NAMU standard criteria, 8V/8mA distribution principles, relay point life curves, failure diagnosis and electrical failure safety, are given and are bound by a 8-bit selected form and a 8-type shelter list.

Family division of labour

  1. 01

    General purpose interface to the separation fence (Page 64, Port 71 input test, Port 73 temperature programmable, 74)

(a) Part-switch output type, Part 75 Switch input type SA6120;

  1. 01

    On-site integrated valves belong to the smart valve locator (23); On-site hand-held smart operators (51);

Revalidation of the 38 / 39 end-process checker.

Key selection discipline

  1. 01

    Input signal confirmed.

    NAMU/ Dry Point / Third Line PNP/NPN by Field Device; 2)

This is the five-parameter check.

Uo/Io/Po/Co/Lo V variants cannot be eliminated; 3) SIL class selected electrical failure safety mode: SIL return path must be manually reset + fail lock; 4) node capacity matching load: sensor load must be inserted in RC absorbent or external intermediate relay;

  1. 01

    Relay point life budget

    10⁵ full load, sensor load down to 10⁴, subject to life cycle accounting; 6)

Diagnosis and state review

Key circuit selection full diagnostic + HART two-way.

This section and Part 64/71/73/74 constitute the "Unique + Test + Temperature + Output + Input" five-pack product group of separation fences; SA 6120, as a representative of typical national production, has made the back-way interface family enters the depth of the work in the switch area + relay output.

Technical Table of Parameters · Parameters / Generic TypeCross-reference
ParametersGenericPrecisionEngineering
Power distribution8 V (typical 8.2 V)8 V (typical 8.2 V)NAMUR standard 8V distribution
Electricity distribution currents≤ 8 mA≤ 8 mA strictly restricted flowBen An's certification requirements are consistent.
Response time20~50 ms10~20 msQuick Process Object Selection Precision
Invert Time20~50 ms10-20 ms truncableThe scene is shaking and the scene is retancing.
Disorder diagnosisLED InstructionLED + fail relay + HART Read backKey circuit selection is fine.
Reverts the malfunction.AutomaticManual / Automatic / Power RestartSIL Back to the road manual.
Separatizing pressure.1500 Vrms (basic) / 2500 Vrms (enhanced)2,500 Vrms (standard)The grid-trenching man. 2500 Vrms.
SIL AuthenticationNone / SIL2SIL2 / SIL3ESD Link Back Road Selection SIL3
ParametersSingle channelDual Channels8 channel16 channel
Number of single channels12816
Width (mm)12.517.5105210
Single weight (g)1101609001800
Power modeIndependent 24 VendIndependent 24 VendPower Rail power supplyPower Rail power supply
Single channel usage1.0 W1.4 W0.8 W0.8 W
Typical unit price ($)500~1200900~22003500~75006000~13000
Apply sceneKey single point valve feedbackTwo circuits together.High density of small and medium projectsLarge project high density + bus power
Technical Table of Parameters . Parameters / Typical ValuesCross-reference
ParametersTypical valueAnnotations
Type of input signalNAMU IEC 60947-5-6 / Dry Point / Third Line PNP/NPNCompatible mainstream field switch
Power distribution8 V (typical 8.2 V)NAMUR Standard Distribution
Electricity distribution currents≤ 8 mANAMU Standard Short Circuit Current
Effective thresholdI > 1.2 mANAMUR Standard Active Current
Invalid thresholdI < 1.0 mANAMUR standard invalid current
Breakpoint determinationI < 0.1 mACables are out of line.
Short-circuit determinationI > 6 mACable short circuits or equipment failure alarms
Uo / Io / PoUo = 8 V / Io = 8 mA / Po = 0.016 WBen-Ancuper
Co / LoCo ≥ 6.0 μF / Lo ≥ 100 mHLong cable is friendly.
Technical Table of Parameters . Parameters / Typical ValuesCross-reference
ParametersTypical valueAnnotations
Output FormElectromagnetic relay points (SPDT/DPDT)Dry point output compatible with any voltage level
Point capacity (destructive)250 V AC/ 2 A or 30 V DC 2 ATypical specification
Pyramid capacity (sension)Reduction required 50% - 70%Add RC absorbent or continuous diodes
Mechanical lifetime10⁷ operations (no load)Relay mechanical limit
Electrical life (full load)10⁵ operations (250 V / 2 A resistive load)Full-load resistance life
Electrical lifetime (half-load)10 (125 V/1A obstruction)Half-stop life
Response time≤ 20 ms (no inverted jump)With inverted time 10-50 ms
SegregationPoints - Circles ≥ 1500 VrmsThe interface is isolated from the internal circuit.
Status indicatorPower / Trigger / Fault LEDIn situ debug visual
Technical Parameter Table . Bits / Options / ValuesCross-reference
bitsOptions / ValuesSelected Elements
1. Number of corridorsSingle/biple/8/16Key single pointer/biple; small and medium items selected 8; large items selected 16 + Power Railway
2. Input signalsNAMUR / Dry Point / Third Line PNP/ NPNSelect by type of on-site device;NAMUR most common
3. Output formSPDT / DPDTsingle-back road SPDT; double-back road DPDT
4. Repetition of malfunctionsAutomatic / Manual / Power RestartKey Valve Manual + Fault Lock
5. SIL CertificationNone / SIL2 / SIL3ESD chain back-to-back path selection SIL3; normal limit selection none
6. Explosive-proofing level[Ex ia Ga] / [Ex ib Gb] / [Ex ic Gc]By blast-proof partition; Zone 0 for ia; Zone 1 for ib
7. Disorder diagnostic capabilityLED / LED+ relay / LED+ relay + HARTCritical circuit selection full diagnostic; general limit LED is sufficient
8. InstallationDIN Track / On-siteControl chamber cabinets for guidance tracks; field IP65/IP67 for site type
ParametersScenario RequirementsSelect Result
Number of channels4 key valves4 Channel Independence or Dual Channels x 2
Input signalNAMUR Approaching SwitchesNAMUR standard 8V/8mA distribution
Output FormSPDT One-way1xSPDT point output
Reverts the malfunction.Key valvesManual Reverted + Fault Lock
Fireproof.Zone 1[Ex ib Gb] IIC T4
SILProcess chain locks back.SIL2 Authentication Type
Disorder diagnosisRemote grouping requiredLED+ relay + HART All diagnostics
ParametersScenario RequirementsSelect Result
Number of channelsCritical cut valve 1Single-channel isolation.
Input signalNAMUR Approaching SwitchesNAMUR standard 8V/8mA distribution
Output FormDPDT Double-Return1xDPDT node output
Reverts the malfunction.SIL3 ForceManual Reverted + Fault Lock
Fireproof.Zone 0 explosive gas[Ex ia Ga] IIC T4
SILIEC 61508 SIL3SIL3 Authentication Type
Power outage safe.ESD, emergency cut.Power outage safety mode
Status ReadbackValve Read BackHART bi-directional arguments written
Technical Parameter Table · Parameter / Site NeedsCross-reference
ParametersScenario RequirementsSelect Result
Number of channels16 liquid-bit switches16 Channel + Power Railway
Input signalAcoustic slot switch NAMURNAMUR standard 8V/8mA distribution
Output FormSPDT One-way16xSPDT point output
Reverts the malfunction.The alarm is automatically restored.AutoRun Bittype
Fireproof.Zone 2[Ex ic Gc] IIC T4
SILNormal alarms are not linked.No SIL authentication is sufficient
DiagnosisRemote check requiredLED+ relay + HART All diagnostics
PowerLarge cabinetsPower Rail power supply
ParametersScenario RequirementsSelect Result
Number of channels8 response ranges8 High density of channel
Input signalHealth NAMUR Approaching SwitchesNAMUR standard 8V/8mA distribution
Output FormSPDT One-way8xSPDT point output
Fireproof.Clean zone non-explosiveNon-explosive (in the chamber cabinet)
SILReaction ZoomSIL2 Authentication Type
Power outage safe.SIL Level ForcePower outage safety mode
HealthCIP CleansNickel plating PCB + Preservative
CommunicationsAMS Asset ManagementEDD/DTM Full Version
Technical parameter table · Steps / Key issuesCross-reference
StepsKey issuesDecision points
1. Input signalNAMUR / Dry Point / Third Line PNP/ NPNSelect by type of on-site device;NAMUR most common
2. Form of outputSPDT / DPDTsingle-back road SPDT; double-back road DPDT
3. Repetition of malfunctionsAutomatic / Manual / Power RestartKey valves manually; alarm automatic
4. SIL LevelSIL2 / SIL3ESD Closed Roads Selection SIL3; General Selection None
5. Explosive and partitioningia / ib / ic + media categorySelect authentication by partition and medium
6. Passage densityBatch size / Channel balance1.5 times the 5-year business growth
A trap.phenomenaResponse
NAMU ErrorThe dry point signal is missing. The NAMUR channel is unconnected and not activated.Select the NAMUR/ dry point type by type of equipment on site
This is an omission from the five parameters.Uo/Io/Po Three, leaking Co/Lo causing long-range bombingFive full checks; long cables must be accounted for as a storage capacity
Points overloadSensory load > 2A points glued to failureexternal intermediate relays; sensory loads plus RC absorption
Power loss is not safe.SIL Class Backway Safe to ESDSIL must choose a safe mode of failure.
Automatically MalfunctionedThe automatic re-entry of the key valves leads to repeated transport.Key valve reset manually + fail lock
Long cable capacity limit.Cable, approach Co. Cable can be blown up.By cable parameters; long-range high
Inverted time is misusedShort inverted times leads to shaking; long leads to leakageAdjust to field equipment type; beat the beat at the point of the election
Insufficient channel density pre-setFirst 8 tunnels will be expanded to 32 in a year.Estimated at 5 years of growth; 1.5 - 2 times the margin of the corridor
LinkAuthentication contentTools/ Methods
- To the receipt and inspection.Model / blast-proof sign / Serial number / Boxing listCheck purchase orders;checking the validity of SIL certificates
Install acceptance and inspectionLine polarity / Tight Twirl / Label spacingTwisting wrench; visual and graphic reconciliation
Electron debugging24 V Power / Input Response / Relay ActionShort circuit test (on-site end short circuit, current ≤ 8 mA); breakline test (offline, trigger break wire alert)
Back to Road University.On-site trigger and relay action consistencySimulation of field equipment triggers/releases, validation of relays NO/NC switch; test backjump time