PRODUCT TECHNOLOGY

Stainless steel vacuum pressure table

Operating principle

The stainless steel vacuum pressure sheet.

Work based on the flexible deformation of spring tubes (Boden tubes) is similar to the normal pressure table, with differences in the range covering negative pressure zones and material preservation. (a) The spring tube is a C-shaped bend on the side of an elliptical, with one end fixed on the interface (basement) and the other (freedom end) sealed; When the internal pressure of the tube is lower than the atmospheric pressure (vacuum), the internal and external pressure of the tube tends to flatten the ellipse, increase the curvature radius of the C-shaped bend and move the free end to the inner level; Free end shift is expanded by pull-side gear-centre gears, which drive the pointer to deflect instructions on the disk. Pure vacuum table (Z) disk at 0 ⁇ - 0.1 MPa orientation tic (0 bits per right) and 1 standard atmospheric pressure corresponding to the maximum vacuum

  1. 01

    0.1MPa; (a) The joint schedule (YZ) is centered by zero: negative pressure area (0 ~ -0.1MPa) on the left (or right) of point zero, and positive pressure area (0 ~ +0.06 to +2.4MPa) on the other side, with a two-sided pointer; Different sub-chrome colours (e.g. white black in the pressure zone, light blue in the vacuum area) are used for selected product vacuum and pressure areas to identify effects on the ground

  2. 02

    The scale... 0 ~ 0.1 to 0 ~ 160MPa · -0.1 ~ 0MPa · -0.1 ~ +0.06 to -0.1 ~ +2.4MPa

  3. 03

    Pointer action One-way (positive pressure) One-way (negative pressure) Two-way (positive and negative pressure)

  4. 04

    zero The edge of the disk The edge of the disk Central to the disk.

Stainless steel vacuum pressure table selection support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
A stainless steel vacuum pressure sheet. Technical Note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

The technical characteristics and selection elements of stainless steel vacuum pressure tables are understood from measurement principles to field applications.

01

MEASUREMENT PRINCIPLE

Measurement principle

Work based on the flexible deformation of spring tubes (Boden tubes) is similar to the normal pressure table, with differences in the range covering negative pressure zones and material preservation.

1.1 Rationale

(a) The spring tube is a C-shaped bend on the side of an elliptical, with one end fixed on the interface (basement) and the other (freedom end) sealed;

When the internal pressure of the tube is lower than the atmospheric pressure (vacuum), the internal and external pressure of the tube tends to flatten the ellipse, increase the curvature radius of the C-shaped bend and move the free end to the inner level;

When the tube is positive, the cross-section tends to turn round, with a reduced curvature radius and a free end moving outward;

Free end shift is expanded by pull-side gear-centre gears, which drive the pointer to deflect instructions on the disk.

1.2 Vacuum scale characteristics

Pure vacuum table (Z) disk at 0 ⁇ - 0.1 MPa orientation tic (0 bits per right) and 1 standard atmospheric pressure corresponding to the maximum vacuum

  1. 01

    0.1MPa; (a) The joint schedule (YZ) is centered by zero: negative pressure area (0 ~ -0.1MPa) on the left (or right) of point zero, and positive pressure area (0 ~ +0.06 to +2.4MPa) on the other side, with a two-sided pointer; Different sub-chrome colours (e.g. white-floor black in the pressure zone, light-blue-floor red in the vacuum area) are used in some product vacuum and pressure areas to identify efficiency in situ

High.

1.3 Differences from normal pressure tables

Measurement principles · Contrast / Common pressure table (Y)Cross-reference
ComparativeCommon pressure tableVacuum TablePressure vacuum `system ' (YZ)
Range0~0.1 to 0~160MPa0.1~0MPa0.1 ~ + 0.06 to -0.1 ~ + 2.4 MPa
Pointer ActionsUnidirectional (Synthetic Pressure)Unidirectional (negative)Two-way (positive and negative)
ZeroThread EdgeThread EdgeCentral to the disk
Typical Work StatusGeneral pressure monitoringVacuum pumps, negative pressure systemsIt's a pressure-negative transposition system.
02

PRODUCT STRUCTURE

Structure

The instrument consists of a conductor system, a moving body, an indicator device, and four parts of the shell.

2.1 Console systems

Connect.

stainless steel (304/316), 60 M14x1.5, 100 ⁇ and above M20x1.5;

Spring tube (Bordone tube)

316 L stainless steel, arc welding/laser welding; low range (≤1MPa) with C tubes, interlocking high-voltage segment in series;

Cut-off spirals.

(c) Contain pulsed shocks (part model alignment) within the system of pressure.

2.2. A moving institution

Pull rod + sector gear - central gear core, stainless steel or copper alloy core (in stainless steel form, all steel core);

The end of the spring tube is fitted with a limit-line screw to prevent the mishandling of the hyperpressure impact-limit nail from causing a card delay.

2.3 Symptoms

Pointer + Aluminium white bottom disk, two-colour chromatic (optional) in a vacuum/pressure area;

Precision ( ⁇ 150/200) is available for mirror disks to eliminate the difference in vision.

2.4 Shells

stainless steel surfaces (304, in the form of colour or polish), air-condensed structures, dustproofing;

Protection level IP54 (option IP65);

(a) Seismic-resistant silicon/glycerine, resistant to vibration V.H.3~4;

Mounting configuration

The direction of the path is direct installation, axle (Z), with the rear (TQ), with the front (ZT), convex, embedding, etc.

2.5 Model Spectrometry

Model

Meaning

Z-60/100/150

Pure vacuum table of ordinary materials

YZ-60/100/150/200/250

General material pressure vacuum joint schedule

YZB / YZ-100B

A stainless steel pressure vacuum.

YTFZ-100H/150H

Total stainless steel shock-resistant vacuum table (oil, H-shock-resistant)

YZ-100BTQ/ZT

stainless steel belt edge/axis variant

Pumpkin.

YA Vacuum table for ammonia, YO oxygen vacuum table (prohibited oil), YZX power point vacuum pressure table, etc.

03

TECHNICAL GUIDE

Advantages and disadvantages

3.1 Advantages (10 items)

A negative-pressurized table overwrite

The YZ UN schedule also measures the vacuum and positive pressure and turns the situation off;

Simple and reliable structure

(b) Pure mechanical structures, which do not require electricity and are directly usable in the event of an explosion;

All stainless steel is corrosive.

316L spring tube + 304 shell, damp, salt fog and generally corrosive atmosphere;

Wide Temperature Work

-40 ~ 70 °C (stainless steel) with no internal condensation risk at low temperature initiation;

Precision Slotting

Φ 150 / 200 Optional 1.6 、 1.0 Class, precision. 0.4 / 0.25 Level;

The quantum interface is complete.

The United Nations system is composed of a total of 7 series of --0.1~0.06 to --0.1~2.4 MPa, which is seamlessly connected to the normal pressure gauge scale;

Better to fight.

(b) Abstant 1.3 times the full range pressure, recovering the subsequent zero-diverse shift;

Show clear visualization

(a) Direct reading in situ, with a double-colour tic vacuum/pressure area identified efficiently;

I'm a good birth control officer.

(b) Multiple variants that extend to earthquake resistant (charging), electrical points, bands, axes, etc.;

Price is moderate.

stainless steel, which is 2 ~3 times the normal type, is still well below vacuum carriers and has a high value for money.

3.2 Limitations (10 items)

Vacuum resolution capacity limited

-0.1 ~0MPa full range is only 1 atmospheric pressure, and the crude vacuum (<1kPa insulation) is undiscreted below and must be replaced by an insulation table or vacuum meter (temperator vacuum, capacitation film regulation);

Overall precision

General 1.6 ~ 2.5, which does not meet trade settlements and precision controls;

No signal is passing far.

Mechanical instruction that DCS/PLC will need to be equipped with additional vacuum/pressure transporters;

Flexible after-effects and fatigue

(b) The frequent exchange of positive and negative pressure accelerates spring tube fatigue, zero-point drift, and must be periodically measured;

Reads are influenced by local atmospheric pressure.

(b) The pressure indicator is zero in air and insufficient -0.1 MPa in the upper plateau area (local atmospheric pressure is below 101.325 kPa);

The shock-resistant response is a little slow.

(b) Delays in response to rapidly changing pressure/vacuity due to oil-filled resistance;

The vibrating environment is still restricted.

Non-shock resistant-type fingers vibrating under vibration, core wear;

Not applicable to corrosive, crystal-resistible media

The diaphragm vacuum table (Isolation of diaphragms + Vacuum System Filling) is required;

Micropressure Area Precision Difference

(a) The pressure table of the micro-proportional pressure/micro-negative pressure measure of 0 ~ kPa, which is overrepresented in the area;

Installation Posture Requirements

It shall be vertically installed, and tilt to include additional errors.

04

APPLICATIONS

Application area

4.1 Typical application scenarios

4.2 No work conditions and alternatives applied

Area

Typical work, recommended scale.

Vacuum/Rotz pump

Pump entrance vacuum monitoring 0.1-0 MPa (Z/YZ)

Chemical distillation/evaporation

Negative pressure monitoring of the depressive distillation system 0.1~+0.06/0.15 MPa

Pharmaceuticals/food

Vacuum drying, vacuum filling, fungi scavengers 0.1 ~ 0 / -0.1 ~ +0.3MPa

Warming cooling.

Refrigerated water/cooled water pumps import/export, air fleet vacuum 0.1 ~ 0.5 + 0.9 MPa

Electricity

Vigilance monitoring of motor condensers 0.1-0 MPa (Z, regular power distribution points)

Laboratory response sheet

Control of positive and negative pressure-trading process 0.1 ~ + 0.15/0.3/1.5 MPa

Ships

Ballast water vacuum prefiltration system (salt fog environment) 0.1 ~ + 0.5 MPa (stainless steel advantage scenario)

Metallurgy/power plants

Corrosive Resistance Process (YTFZ tremors) 0.1 ~ +2.4MPa

Not applicable

Recommended replacement

Crude ~ High vacuum (insulation < 1kPa)

Resisting vacuumometers, capacitating film vacuumometers, pressure-resilient transmitters

Strong corrosive, crystall, high-cord media

Divestment Vacuum Table / Divestment Sealed Vacuum Transmitters

It's a long-distance control, a chain.

Vacuum pressure transmitter (screech/scrap type)

Micropressure Area ( ⁇ kPa)

Menm Box Pressure Sheet / Micro differential pressure transmitter

Security locks quick response.

EMP Vacuum Table (YZX) or Switch + Transmitter Program

05

TECHNICAL SPECIFICATIONS

Technical Parameter Table

5.1 Overall technical parameters

5.2 Slotting scale of scale (YZ/YZB series)

Technical parameter table · Item / ParametersCross-reference
ItemParameters
Applicable standardsGB/T 1226-2010 (general pressure table); barbed steel seismic reference JB/T 6804
Normal diameterΦ60、Φ100、Φ150、Φ200、Φ250
Connection thread⁇ 60: M14x1.5; ⁇ 100 and above: M20x1.5
Accuracy classΦ 60 : 4 / 2.5 Level; ⁇ 100 : 2.5 / 1.6 Level; ⁇ 150 : 1.6 / 1.0 Level; ⁇ 200 : 0.4 / 0.25 / 0.16 Level (precision); General 1.5 ( 1.0 ) Level
Scale rangePure vacuum -0.1 ~ 0MPa ;United Nations -0.1 ~ +0.06 / 0.15 / 0.3 / 0.5 / 0.9 / 1.5 / 2.4MPa ;English -30 inHg~ 0 Wait.
Use of environmental temperature40~70℃
Relative Humidity≤85%
Vibration resistanceNormal V.H.2~3; earthquake resistant (oil recharge) V.H.3~4
Ingress protectionIP54 (optional IP65)
Precise material316L stainless steel (retainless steel); common tin phosphorous copper
Case materialSUS304 (Stainless steel)
Mountingvertically installed;reverse/axis/backside/front side/crumb/map-dembling
Review BasisJJG 52 (Flexical Widget General Pressure Sheet Checker Protocol)
Technical parameter table . UNMage range (MPa) / DescriptionCross-reference
Quantities (MPa)Annotations
0.1~0Pure Vacuum Table
0.1~+0.06Minimum United Nations
0.1~+0.15Pressure-retardation/vacuum drying commonly used
0.1~+0.3Pharmaceutical food fungi
0.1~+0.5Heating Refrigerator Unit
0.1~+0.9Pumping team and process water system
0.1~+1.5Reaction to the situation
0.1~+2.4Top of the United Nations programme.
ModelNormal diameterAccuracy classCharacteristics
YZ-60Φ604 / 2.5Normal connection, M14 x 1.5
YZB-100Φ1002.5 / 1.6Unstainless steel entanglement, standard field type
YZB-150Φ1501.6 / 1.0Unstainless steel connection. Reads very well.
YTFZ-100H/150HΦ100/1501.5(1.0)Total stainless steel + earthquake-resistant oil, respiration condition
YZ-200/250Φ200/2500.4~0.16Precision/standards, validation and critical points
06

SELECTION GUIDE

Select Table

6.1 Required parameters for ordering

  1. 01

    (a) The name of the measured medium, corrosiveness, crystallization/condensation;

  2. 02

    Nature of the situation

    Pure negative pressure / Pure positive pressure / positive negative pressure exchange;

  3. 03

    Normal working pressure/vacuity and maximum volatility range;

  4. 04

    Media temperature and environmental temperature, humidity, vibration;

  5. 05

    Table radiance ( ⁇ 60~250) and accuracy level;

  6. 06

    (a) the form of installation (reverse/axis/side/bed);

  7. 07

    Connecting screws (default M20x1.5);

  8. 08

    Are there options for shock resistance (charging), electrical points, double colour chromatoma etc.

6.2 Type selection (core decision-making)

6.3 The rules for the selection of the quantum course

Stabilization of work

Maximum working pressure (or vacuum) at 1/3 ~ 2/3 of the range;

Change of job

The upper limit of the positive segment is to be filled by a maximum positive pressure of 1.5 times the selected range, and the negative pressure segment is to be fully covered (the negative pressure of the UNPIF is fixed)

  1. 01

    0.1MPa; overloading proof core: instantaneous overloading of ≤1.3 ' s full mass range;

Example:

Vacuum dryer vacuum -0.09MPa, emptied nitrogen to +0.05MPa ⁇ Select -0.1 ~ +0.15MPa (a positive working point 33%, full negative pressure segment).

6.4 Table & Precision Selection

6.5 Example of Model Preparation (YZB/YTFZ Series)

Technical IconClick to see the big picture
Y T F Z - 100 H TQ
│ │ │ │ │ │ └─ Mounting flange (TQ rear / ZT front; omit if none)
│ │ │ │ │ └──── Liquid-filled for vibration resistance (H; omit for standard)
│ │ │ │ └─────── Dial diameter (60/100/150/200)
│ │ │ └─────────── Vacuum (Z: vacuum / compound gauge)
│ │ └───────────── Corrosion resistance (F: all-stainless pressure system)
│ └─────────────── Vibration resistance (combine with F for YTF series)
└───────────────── Pressure gauge type

6.6 Selective elements and use maintenance

  1. 01

    Let's see if we need a joint trip.

    Pure negative pressure selection Z, positive negative pressure exchange for YZ, pure positive pressure selection Y - avoids the loss of pressure resolution for the use of unwanted positive pressure segments;

  2. 02

    Do not choose any of the thick vacuums

    A process (high vacuum) of absolute pressure < 1kPa is required to select a vacuumometer that is physically undevisible on the UNT;

  3. 03

    Highland correction awareness

    (b) When local atmospheric pressure is below standard, the limit vacuum indicator does not reach -0.1 MPa;

  4. 04

    (b) Vertical installation, short-term takeover, vacuum side-watching for sealing and leakproofing;

  5. 05

    (b) Slow vacuum/pressure to avoid the reformation of spring tube shocks;

  6. 06

    Periodicity Check

    The vacuum and positive segments shall be separately measured (by JJG 52) and the time period for the handover of the use of the condition shall be reduced as appropriate;

  7. 07

    Electro-point type

    (a) The set pointer may be adjusted only after the pressure has been stopped, and the contact capacity is 2 ~5 times the safety factor for intermediate relays;

  8. 08

    Strong corrosive/clinic medium

    The common stainless steel conductor also plugs in by replacing the diaphragm vacuum table.

Selective Table . Work Situational Assessment / Recommended ModelCross-reference
Work situation judgementRecommended Model
Vacuum measure only (-0.1 ~0 MPa)Z Vacuum Table
A vacuum is the main thing.YZ -0.1~+0.06/0.15
Positive and negative pressure is very high.YZ United Scale, scale in larger directions
Only positive pressureY/YB pressure sheet (no UT)
Corrosive atmosphere/mediaYZB Total stainless steel
Vibration + PulseYTFZ-H earthquake-resistant oil
Vacuum alarm/lock requiredYZX point vacuum pressure table
Selective Table . Tables / PrecisionCross-reference
Table PathPrecisionApplication
Φ602.5/4 LevelSmall equipment, vacuum pump packages
Φ1001.6/2.5 LevelMainstream of on-site surveillance
Φ150Level 1.0/1.6Important points, need for more accurate readings
Φ200/2500.4 Levels and belowValidation of standard forms, precision monitoring
07

TECHNICAL GUIDE

Horizontal comparison table

7.1 stainless steel vacuum pressure table vs proximity instrument

7.2 Selective mouthpieces

(b) Full steel on corrosive wetness, with a vibrating pulse filling;

This summary technical parameters are based on public samples from GB/T 1226-2010, JJG 52 and mainstream manufacturers (Tiencon, Reed, Anhui-Taiji) and are based on the latest samples from the manufacturer.

Horizontal comparison table · Contrast / stainless steel vacuum pressure table (YZB/YTFZ)Cross-reference
Comparativestainless steel vacuum pressure table (YZB/YTFZ)Normal vacuum pressure table (Z/YZ)Menmation box pressure table (YEF)Vacuum/disposal transmitter
Sensitive shapes316L Spring tubeTinphos-Broncot Springs316 Bronze Membrane BoxCapable/single-crystalline/pressure
Range0.1 ~ 0 and -0.1 ~ +2.4MPaSame Left0.25 ~ 100 kPa (micropressure)10Pa ~ Atmospheric pressure and above
Vacuum resolutionCrude vacuum (~1kPa level)Same Left± 0.1 kPa level0.1 Pa~1 Pa Level
Measurable mediaGases, liquids, vapours (without strong corrosion)Same LeftGases onlyGas/liquid (vision model)
PrecisionLevel 1.0 ~ 2.5Level 1.0 ~ 2.5Level 2.50.075~0.2%FS
Long PassNone (mechanical)NoneNone4~20mA/HART
ElectricityNo need.No need.No need.24VDC required
PercussionOkay.Difference (Cronium alloy steering)Okay.Good (316 L/ Hae-Leating)
Resist.Stunable V.H.3-4V.H.2V.H.3Strong
PriceLow ~ MediumMinimumLowHigh
Typical usesPressure-relief systems, vacuum pumps, fungi-freeGeneral vacuum monitoringMicropressure of furnace/windpipeControl systems, precision measurements