Stainless steel vacuum pressure tableClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-VA-100
Stainless steel vacuum pressure table
Stainless steel vacuum pressure table, stainless steel vacuum pressure table
01
Classification: stainless steel vacuum pressure table
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-VA-100 |
|---|---|
| Measurement principle | Resilient (Bourdon tube) mechanical measurement, Negative pressure (Vacuum) and positive-pressure indicator |
| Case material | 304 Stainless steel Stamped sealed shell |
| Dial diameter | Φ63、Φ100、Φ150 |
| Connection | Thread Direct (down) / Back mount with flange (panel installation) |
| Connection thread | M20×1.5、G1/2、1/2NPT、R1/2 |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Measurement range | Vacuum Paragraph: -0.1–0MPa;pressure segment: 0–0.1MPa to 0–10MPa (Knocking) Negative pressure One |
| Accuracy class | Level 1.6 |
| Process medium temperature | -40~+100℃ |
| Ambient temperature | -40~+70℃ |
| Operating pressure | Static load: ≤ upper range limit 2/3; dynamic load: ≤ upper range limit 1/2; Vacuum Sector long term Full scale Use |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Ingress protection | IP54 (shell sealed) |
| Applicable standards | GB/T 1226 / JJG 52 |
| Suitable media | Vacuum system, Negative pressure process, compressor inhaler gas/liquids without corrosive or weak corrosive gas/liquid |
| Ambient humidity | ≤85%RH (Non-condensing) |
Product selection
PREST-VA-100| Code | Dial diameter |
|---|---|
| D1 | Φ63 |
| D2 | Φ100 |
| D3 | Φ150 |
| Code | Mounting |
|---|---|
| A1 | Bottom mount without flange (Thread Direct) |
| A2 | Bottom mount with rear flange |
| A3 | Back mount with front flange (panel embedded) |
| Code | Measurement range (MPa) |
|---|---|
| V1 | -0.1–0 (pure Vacuum) |
| V2 | -0.1~0.15 |
| V3 | -0.1~0.3 / -0.1~0.6 |
| V4 | -0.1~1.0 / -0.1~1.5 |
| V5 | -0.1~3.0 / -0.1~6.0 |
| V6 | -0.1~10 |
| Code | Elastic sensing element material |
|---|---|
| M1 | 316L Stainless steel Bourdon tube |
| M2 | Tin Phosphor bronze Bourdon tube (conventional) |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.6 |
| E2 | Level 1.0 |
| Code | Connection thread |
|---|---|
| G1 | M20×1.5 |
| G2 | G1/2 |
| G3 | 1/2NPT |
| G4 | R1/2 |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us