PRODUCT TECHNOLOGY

Thermal resistance for temperature measurement at stations

Operating principle

Thermal resistance to temperature measurement at the station.

The temperature element is measured by the electrical resistance value of platinum based on a single temperature change, using Pt100 or Pt1,000 platinum. Platinum resistance temperature is following international temperature standards. ITS-90 Electro-temperature relationship -200 ~ 0 ℃ and 0 ~ +650 ℃ The region is described in different ways: R0 = 100 Ω( Pt100 ),A = 3.9083 × 10 ³ ℃¹,B = -5.775 × 10 ⁷ ℃²,C = -4.183 × 10 ¹²℃⁴。 Pt100 100 times at 0 °C and 138.51 times at 100 °C, with an average temperature factor of approximately 0.385 per °C. The core is the hot tubing.

  1. 01

    200 ~ 0 ℃:Rt = R0·[1 + A·t + B·t² + C·(t-100)·t³]0 ~ +850 ℃:Rt = R0·(1 + A·t + B·t²)

  2. 02

    Low pressure PN ≤ 2.5 ≤ 2.5 QVV, Water Supply, Water Return / Straight pipe / Thread Connection

  3. 03

    Medium pressure PN 4.0 ~ 10 ~ 4.0 ~ 10 % Medium pressure boiler water, superheated steam % direct pipe / welding / incremental

  4. 04

    High pressure PN 10 ~ 25 ~ 10 ~ 25 QP boiler overheater, reheater = Gradient/ Step/ Whole exercise

Thermal resistance type support for temperature measurement at stations

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Thermal resistance for temperature measurement at stations Technical Note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, the technical characteristics and selection elements of thermal resistance for temperature measurement purposes at the power station are known.

01

TECHNICAL GUIDE

Overview

(Power Plant Service RTD, WZPK/WZP Series) is an industrial platinum resistance temperature sensor designed specifically for high-temperature, high-voltage vapour and water temperature conditions in power plants, nuclear power plants and large industrial boilers. Its core idea is to "separate high-pressure vapours with high-intensity heat tubes, and measure temperature accurately with platinum resistance temperature", and to isolate platinum-resisting temperature elements from high-temperature high-voltage vapour media in a completely safe manner, by means of targeted designs such as the incremental (step) heat-set structure, the Inconel 600/Hasss alloy protection tube, anti-monition support, and high-pressure seals, which ensure both temperature accuracy and mechanical reliability in boilers' start-up, vibration and pressure fluctuations.

It is one of the most critical and stringent temperature measurement programmes in the generator unit thermometry system. The station boiler can have a temperature of 540 ~620 °C, pressure 10 ~ 25 MPa, flow speed 30 ~ 100 m/s, and strong mechanical vibrations associated with combustion pulses. Thermal resistance in the general assembly or thermal resistance in the gill is directly exposed to the above conditions and the protective tube is either precipitated, broken or rendered ineffective by high pressure.

Therefore, the temperature measurement of the power station must be accompanied by a special heat-set-based heat-retarded plant, with the usual heat-retard structure being: a gradual expansion (stepping)

Hot tubings, whole-made hot tubings, welding of heat tubes, insertion of tube-type hot tubings, etc.

Main technical characteristics

General description · Serial number / CharacteristicsCross-reference
Serial numberCharacteristics
1High-intensity heat tube: Gradual / Whole exercise / Welding heat tube to meet ASME PTC 19.3 / ASME B16.5 strength accounting
2Temperature stabilization: Pt100 / Pt1000 Platinum Retardation ITS-90 standard, long-term stability ±0.05 ℃
3Protection tube for corrosion and heat resistance: Inconel 600 / Haps C-276/ 1Cr18Ni9Ti stainless steel
4Temperature range: -200 ~ +650 ℃ (depending on the protective tube material)
5Quoted by: / / / , integrated temperature adapters
6Visibility structure: inner line spring / anti-earthquake support / anti-vibration gasket
7High-pressure-proof structure: metal seals metal cones / entanglement pads / lens pads / strong seals
8Process connections: high pressure flange HG/T 20615 / ANSI 600#~2500 / Welding
9Site is complete: Thermostat / Reheater / Water / Coal / Air heater / Air-gas whole scene
10Life: reasonable selection 4-10 years, matching the power plant overhaul cycle
02

MEASUREMENT PRINCIPLE

Operating principle

2.1 Pyramid electrical resistance to temperature

The temperature element is measured using Pt100 or Pt1,000 platinum, based on the single temperature-modified resistance value of the metal platinum.

ITS-90, the resistance-temperature relationship is described in different formats between -200 ~ 0 ℃ and 0 ~ +650 ℃:

  1. 01

    200 ~ 0 ℃

    Rt = R0·[1 + A·t + B·t² + C·(t-100)·t³]0 ~ +850 ℃:Rt = R0·(1 + A·t + B·t²)

℃⁴。 Pt100 Yes. 0 ℃ Time 100 Ω, 100 ℃ Time 138.51 Average temperature factor, approximately 0.385 Ω/℃。

2.2 Thermal tube resistance of the power station

The core is the thermo-stealing design of the thermo-stealer. Thermal-stealing tube is directly exposed to high temperature, high pressure vapour media.

, the requirements for accounting for strength of ASME PTC 19.3 Themoules or ASME B16.5 / B31.1 must be met:

Thermal tube is classified by the stress tolerance level.

2.3. Invitro-defense mechanisms

The station boiler produces strong vortex-inducated vibration (Vortex-induced Vibration) due to combustion pulses, water fluctuations and flow incentives for the soda mixture. G = burn frequency of the boiler / ratio of the inherent frequency of the protective tube. When G approaches 1

The resonance occurs at a time when the protection tube is broken in a short time.

Inline spring support

Add springs to the protective tube to support the temperature and spread the vibration stress;

Welding or French Installation

Avoiding the looseness of screwdriver connections;

Shorten depth of insertion

(b) Minimize the length of the arm while ensuring a representative temperature measure;

Five, shielding position.

The spot avoids high-flow areas such as piped circuits, valves, and throttles.

2.4 Quoting method and cold end effects

The 3 type is used as a lead.

2.5 Thermal work flow at the power station

Measurement formulaClick to see the big picture
-200 ~ 0 °C:Rt = R0·[1 + A·t + B·t2 + C·(t-100)·t3]
Measurement formulaClick to see the big picture
0 ~ +850 °C:Rt = R0·(1 + A·t + B·t2)
Measurement formulaClick to see the big picture
Of which R0 = 100 (Pt100), A = 3.9083 x 10 3 °C 1, B = -5.775 x 10 7 °C 2, C = -4.183 x 10 12
Modus operandi . Level / Publicly referred to pressure (MPa)Cross-reference
LevelPublicly known pressure (MPa)Typical applicationsHot tubing form
Low Pressure PN ≤ 2.5≤ 2.5Low pressure steam, water, water back.Straight pipe / screwdriver connection
Medium pressure PN 4.0-104.0~10Water from the middle pressurized boiler, excessive heat steamStraight tube / Welding / Gradient
High pressure PN 10-2510~25High pressure boiler overheater, reheaterGradual/ step/ whole exercise
Super-high pressure PN ≥ 25≥ 25Supercritical, nuclear conventional.Whole exercise / stacking / segments expanding
The working principles . Serial number / Line-inCross-reference
Serial numberQuoteRationalePrecision
1A two-line system2 Lines powered and measured simultaneously, lead wires resistance superimposed and errorLow, for < 50 m short distance only
The working principles . Serial number / Line-inCross-reference
Serial numberQuoteRationalePrecision
2Trilinear1 power supply + 2 measurements, and utility cable resistance compensated by a bridge±0.1 ℃ Main Power Station
3Four-wire2 power + 2 measurements, no resistance to the cordsHigh ± 0.05 °C, superheated vapour precision measurement / performance test
StepsActions
①Overheated steam / Give water temperature ⁇ heat tube heat ⁇ inner protection tube PT100
②The platinum resistance value, Rt, is thermally variable, and it's reflected in the heat resistance signal.
③Line 2/3/4 wires send Rt to the side of the machine temperature transceiver or DCS card
④Transmitters press IEC 60751-minute linear 4-20 ma / Hart
⑤Signal sent to DCS / DAH / Coordinated Control Display, Alert, Record, AutoControl
⑥Participation in boiler combustion, water supply, temperature-reducing spray, heat-excavation chain control
⑦Excess / Open / Short-Range & Zoom to malfunction (≤ 3.6 mA or ≥ 21 mA)
⑧Thermal tube is either dead or vibration is dead.
03

PRODUCT STRUCTURE

Product structure

3.1 Main structural components

3.2 Thermal tube structure forms (5 classes)

3.3 Structure forms

Temperature component (plypt)

Functional description: Temperature-Treatment Core Usage/Specific: Pt100 / Pt1000 film or circuit, level A / B

Internal protection tube

Functional description: Pt100 Component Protection and Heat Control Usage Common Materials/Specific: Inconel 600 / Haps, C-276 / 1cr18Ni9Ti / 316L

Therm owell

Functional description: Pressure, isolation of high pressure vapour medium, key component for temperature measurement at power stations Common material/specification: 12Cr1MoV / 15CrMo / 1Cr18Ni9Ti /F22 / F91 / Stack Inconel 600

Inline spring (invigoration)

Functional description: Supporting temperature, dispersive vibration stress Usage material/specify: Inconel 600 / 316L spring

Insulation (porcelain / china pole)

Functional description: Separating the fuses to avoid short circuits Usual material/specify: Aluminium oxide / ceramic skeleton / boete insulation

Lines (heatlines)

Functional description: electrical connection of platinum electrical resistance to the switchboard, common material/specification: nickel chromium line / boeco insulation high temperature line / silver-coated copper line

Cold-end seal / Substrate

Functional description: tail seal, connector end. Common material/specifier: ceramic glue / epoxy / stainless steel base.

Connecting box caps

Functional description: protection line end, easy to maintain Usual materials/specifiers: Aluminium alloy / stainless steel / IP65 ~IP68 / Detonation Exd / Exia

Connector End

Functional description: the connection of the lead line to the compensatory cable Common material/specifier: ceramic / nickel plating copper / spring / spring /

Process connection

Functional description: Installed in an overheater / reheater / for water pipes Common material/specifiers: HG/T 20615 PN 16 ~ PN 32 / ANSI 600 ~ 2500 # / Welding

Transmitters (optional)

Functional description: Integrated signal conversion Usual material/specifiers: 4-20 mA + Hart / MODBUS / PROFIBUS-PA / Foundation Fieldbus

Deck / Warning

Functional description: Identification of the name, temperature, pressure, length, material Usual material/specification: stainless steel / aluminium alloy engraving

Form

Name of component: Structural characteristics Functional description: Typical application Usual material/specify: pressure level

Straight line

Name of component: Conservatory tube and thermal tube line, Equivalent processing Function description: Low pressure vapour / water supply / water return ≤ 2.5 MPa

Gradual expansion (stepping)

Name of component: root thickened, increase in inherent frequency, oscillation Description of function: high pressure over thermal steam, reheated steam Usage/Specific: 10~25 MPa

Whole exercise.

Name of component: Total exercise, high intensity, long life Function description: supercritical mass main vapour Usage Usage/Specific: ≥ 25 MPa

Welding

Name of component: Carbon Steel Base + Inconel Welding Layer, Power + Preservative Double-Effect Function description: High temperature, high pressure overheater Usage/Specific: 10~25 MPa

Welding / screwdriver

Structural characteristics: Direct welding or screwdrivers connected to the tube wall Typical application: Saver of coal / Water / Pressurized steam level: ≤ 10 MPa

Form

Structural characteristics: Structural characteristics Typical applications: Typical applications Pressure levels:

Welding

Structural characteristics: Thermal tube is welded directly into the outer wall of the pipe Typical application: high pressure overheater / main steam pressure level:

French

Structural characteristics: Connected through high pressure flange (HG/T 20615 / ANSI 600#~2500#) Typical application: Export of heater / reheater import/export Pressure level:

Thread

Structural characteristics: Twisted equipment directly through NPT/ G screws

Card

Structural characteristics: Stabilizing through screwdrivers to facilitate the Depths Typical application: low pressure to water / test circuit

Active French

Structural characteristics: Frank + Sealed rings can be adjusted along the tube. Typical applications: frequent on-site / multipoint temperature measurement pressure level:

- Fast-dressing.

Structure characteristics: DIN 11851 / Tri-Clamp Fast Loading Interface Typical Application: Debug phase / Test rack Pressure level:

04

TECHNICAL GUIDE

Advantages and disadvantages

Product advantages

High pressure high intensity

Specific: Gradual / Total exercise heat tube meets ASME PTC 19.3 strength accounting, 10~25 MPa safely running

We're good at protection.

Specific: Gradual + inner liner spring support, inherent frequency avoided burn pulse resonance

High temperature accuracy

Specification of: Pt100 A ±0.15 ℃ + 0.002 ⁇ , B-class ±0.30 ℃ + 0.005 |t|

Long-term stability is good.

Specific: Platinum resist annual drift ≤ 0.05 ℃, need not be replaced during the overhaul period

It's a good switch.

Specific: Standard connector box + Standardized pilotine (2/3/4), spare parts swap convenient

It's integrated with the transvestites.

Specific: Directly integrated temperature adapters, simplified wiring, improved resistance to interference

Stations are complete.

Specific: Thermostat / Reheater / Water / Coal Saver / Air Preheater / Smoke Pane

Major repairs cycle match

Specific: Reasonable selection 4-10 years of life, consistent with 6 years of major maintenance

Disadvantages and use restrictions

Insert Depth Large, Install Space High

Response: Overheated vapour temperature measurement requires the insertion of a pipe 1/3 diameter, often 600 ~ 1200 mm; space restricted positions need to be fitted with a shorter or elbow structure

The heat tube weighs a lot.

Response: The whole-body exercise of thermal tube can be up to 20 ~ 60 kg in single units, with a special lifting tool for installation and repair

Response time is excessive

Response: Protection tube + heat tube double structure, t0.5 usually 15 ~ 60 s, which is twice as slow as naked 2 ~ 4

Vibration failure risk

Response: Turboflow Vibration Protection Pipes when they are not properly selected or installed; the inherent frequency is to be accounted for by ASME PTC 19.3

Higher prices

Response: Overall exercise + Inconel Welding Suite price is 5-10 times more than normal

Cold-end sealing is high.

Response: Wet preservative seals require more than IP65, otherwise the lead line corrupts short circuits

Fixed overhaul cycle

Response: Thermal tube corrosive or fracture requires a fireplace replacement, affecting the availability of the aircraft

05

APPLICATIONS

Application area

Temperature measurements used extensively at key stations of the following power stations

The boiler overheater exit

Application area: High temperature overheat 540 ~ 620 °C / 10 ~ 25 MPa / 30 ~ 80 m/s Typical medium: total exercise + Inconel 600 stacks Welding Recommended heat tube/protector:

The boiler reheater is imported and exported.

Application area: Reheated vapour 540 ~ 610 °C / 4 ~ 10 MPa Typical medium: Gradual + Inconel 600 Protective tube

Screen Overheater

Application area: High temperature high pressure overheat 450 ~ 620 °C Typical medium: Gradual + 1Cr18Ni9Ti / Inconel 600 Recommended heat tube/protector:

Top-level heater

Application area: Main steam export 540~620 °C / 17~25 MPa typical medium: total exercise + stacking Inconel 600 Recommended heat tube/protector tube:

High pressure to water.

Application area: High pressure water supply 200 ~ 290 °C / 10 ~ 25 MPa typical medium: Gradual + 1 Cr18 Ni9Ti / F22 Recommended heat tube/protector:

Import/export of coal

Application area: boiler preheat 150 ~ 350 °C Typical medium: straight tube / welding + 1 Cr18 Ni9Ti Recommended heater/protector:

Airbag water level / temperature

Application area: gas pack saturation / steam 340~360°C typical medium: straight tube / welding + 316L / 1Cr18Ni9Ti Recommended heat tube/protector:

Air heater

Application area: Frozen side 200 ~ 400 °C; Air side 30 ~ 200 °C Typical medium: straight tubing + 1 Cr18 Ni9Ti / 316L Recommended heat kit/protector:

Temperature after cooling the spray

Application area: Thermal excess steam 400 ~ 540 °C typical medium: Gradual + Inconel 600 Recommended heat tube/protector:

Frozen / Frozen temperature

Application area: Save coal-capable / preheater pre-shot gas 200 ~ 800 °C Typical medium: straight tube + Ha, C-276/Inconel 600 Recommended heat tube/protector:

Nuclear Power Conventional Island

Area of application: soda separators, 2nd circuit, main steam 280 ~ 320 ℃ Typical medium: Gradual + 1 Cr18Ni9Ti / F22 RECOMMENDED HEALTH PHILE / PROTECT:

Thermal recovery boiler.

Application area: excess heat boiler steam 400 ~ 500 °C Typical medium: Gradual + 1 Cr18 Ni9Ti / Inconel 600 Recommended heat tube/protector:

Waste generation / biomass

Application area: excessive heat steam 400 ~ 480 ℃ The smoke is corrupted. C-276 / Inconel 600 Recommended heat tube/protector:

06

TECHNICAL SPECIFICATIONS

Technical Parameter Table

6.1 Overall technical indicators

6.2 Control Tables for heat-set materials for temperature resistance

6.3 Control Tables for protection of tube materials for temperature resistance

  1. 01

    Thermal resistance model naming for temperature measuring station selection (cf. JB/T8622+DL/T)

5210)

W(temperature)Z (temperature)P(protective tube)x (several Pt100 / Pt1000)-□ (hot tube form direct/ incremental/ exercise)-□ (publicly called PN16 ~PN32)-□ (process connection Frank / welding / screw)-□ (insert depth L)-□ (explosive/ output)

7.1 Type by Point Type

7.2 Type in the form of a hot tubing

7.3 Select by Process Connect

7.4 Type by Output

  1. 01

    Selection Guide

8.1 Selection Processes

the selection shall be determined in the following order:

8.2 Selecting type for heat resistance compared to general assembly

8.3 Decision Tree for the Key Site at Power Station

1 Main steam export / upper-stage overheater (Pesostatic) > 600 ℃ / 25 MPa ) Part of the exercise + F91 Base + Inconel 600 (b) Welding tubes;

2 Reheater Import/Export ( 540 ℃ / 4 ~ 6 MPa ) Gradual expansion + Inconel 600 Protection tube. + 1 Cr18Ni9Ti heat tube;

3 Screen Overheater ( 450 ~ 580 ℃ / 15 MPa ) Gradual expansion + Inconel 600 + 1 Cr18Ni9Ti heat tube;

4. High pressure to water ( 290 ℃ / 25 MPa Gradual expansion + 1 Cr18Ni9Ti heat tube + 1 Cr18Ni9Ti protection tube;

5 Packet Temperature 360 ℃ / 18 MPa Direct liner + 1 Cr18Ni9Ti/ Welding;

6 Province of coal-fired imports and exports (in thousands of United States dollars) 150 ~ 350 ℃ / 4 MPa > Direct tube / Welding + 1 Cr18Ni9Ti;

7 Air preheaters 30 ~ 200 ℃ / 0.1 MPa Direct liner + 316 L;

8 Frozen side() 200 ~ 800 ℃ / 0.1 MPa ) + Hax C-276 / Inconel 600 (c) Corrosion resistant;

9 After cooling spray ( 400 ~ 540 ℃ / 15 MPa ) Gradual expansion + Inconel 600 ;

10 Super-Classic Major Vapour (U.S.C.) > 620 ℃ / ≥ 25 MPa ) Part of the exercise + TP347H Welding Inconel 600 。

8.4 Attention to thermal resistance installation for temperature measuring purposes at power stations

Inserting depths, as required by the process, overheated vapour temperature measurement into the pipe 1 / 3 diameter to avoid heat error;

2 Point position should be avoided by downwards of piped bends, valves, throttles. 5 High current area within D;

3 Welding requirements for the root of the extended hot tubing 100% (b) Radioprospecting + infiltration detection;

The French connection should use gaskets (soft graphite/tangular pad/metal ring pad) matching the medium, and be evenly secured to avoid bias;

Welding in high temperature high pressure areas to avoid loose threading;

6 Explosive-proof wire boxes (Exd II) must be used in blast-proof settings BT4 / Exia II CT6 and secure seals;

7 Operator boxes shall be sealed to protect against tide. IP65 above), wet environment selection IP67/IP68 ;

The lead line penetrator should use blast-resistant or metal hoses to avoid mechanical damage;

The protective tube shall be thoroughly inspected during major repairs, with a view to its appearance, wall thickness and welding, and replacement as necessary;

Vibration accounting is prohibited when it is not passed and the incremental or anti-vibration support must be replaced.

8.5 Maintenance element

— End of document —

Technical Table of Parameters . Parameter Item / Parameter ValueCross-reference
Parameter ItemParameter Value
Product implementation standardsIEC 60751 / IEC 61515 / ASME PTC 19.3 / JB/T 8622 / JB/T 9238 / GB/T 18404 / DL/T 5210
Temperature Component TypePt100 / Pt1000 Pl (minus / circuit)
Accuracy classLevel A ± (0.15 + 0.002 ⁇ t ⁇ ) °C; Level B ± (0.30 + 0.005 ⁇ t ⁇ ) °C; and 1/3 B optional
Temperature range200 ~ + 650 °C (depending on the material for protective tube)
Quotend / rd / th /
Insulation resistanceTemperature ≥ 1000 M once m; High temperature ≥ 5 M once m
Protection tube materialInconel 600 / Haps, C-276/ 1Cr18Ni9Ti / 316L / 304L
Hot tubing material12Cr1MoV / 15CrMo / 1Cr18Ni9Ti / F22 / F91 / Stack Inconel 600/ Whole exercise
Exterior Specification⁇ 16 / ⁇ 20 / ⁇ 22 / ⁇ 25 mm mainstream, which can be expanded to 30~50 root
Insertion depth L200 / 300 / 400 / 500 / 600 / 800 / 1000 / 1200 / 1500 / 2000 mm or custom
Process connectionHG/T 20615 PN 16 ~ PN 32 / ANSI 600 ~ 2500 #; Welding; screwdriver NPT/G / M
Response Time t0.5⁇ 16 about 15~25 s; ⁇ 25 about 25~45 s; heat-borne tubes up to 30~60 s
Operating pressureConstant pressure / 2.5 / 4.0 / 6.4 / 10 / 16 / 20 / 25 / 32 MPa (at Frank level)
Ingress protectionIP65 / IP67 / IP68 (Accompanying connection box)
Explosion protection markingExd II BT4 / Exia II CT6 (by region)
Line ModeSecond / Third / Four Lines; blast protection 4 Line priority
Output signalmV / 4-20 mA / Hart / MODBUS / PROFIBUS-PA / Foundation Fieldbus
Use temperature (wirebox)40~+85 ℃
Relative Humidity5% ~ 95% RH, no condensation
Storage temperature40 ~ +85 ℃, dry and ventilated
Vibration resistance≥ 60 Hz; G = boiler frequency / inherent frequency < 0.8
Life expectancy4-10 years (compatible with major power plant repair cycle)
Weight (reference)Φ 25 × 1000 The whole thing. 25 kg;Φ 16 × 500 Gradual expansion of the convention 6 kg
Technical parameter table · Serial number / Thermal tube materialCross-reference
Serial numberHot tubing materialApply the pointTemperature limitPressure rating
112Cr1MoVHigh pressure to water / medium pressure over thermal steam+580 ℃≤ 16 MPa
215CrMoHigh pressure overheater / reheater+560 ℃≤ 25 MPa
31Cr18Ni9Ti (321)Thermostan export / reheater / water+650 ℃≤ 25 MPa
4F22 (12Cr2Mo1)High pressure to water / main steam+595 ℃≤ 25 MPa
5F91 (T91 / P91)Supercritical main steam.+650 ℃≥ 25 MPa
6TP304H / TP316HHeats / Reheaters+700 ℃≤ 25 MPa
7TP347HSuper-critical overheat exit.+700 ℃≥ 25 MPa
8Whole exercise + stacks of Inconel 600Supercritical main steam export.+700 ℃≥ 25 MPa
9H276 WeldingWaste generation / biomass overheater+650 ℃≤ 25 MPa
10316L line PTFE / F4Frozen devulcanization low temperature flue gas+200 ℃≤ 1.0 MPa
Protection tube materialTemperature measure limitCorrosivenessTypical applications
316L+650 ℃WeakFrozen / Air / Water
1Cr18Ni9Ti (321)+650 ℃MediumHeats / Reheaters
Inconel 600+1100 ℃StrongMain steam / HTVP
H276+1100 ℃ExtremeWaste generation / high-corrosive flue gas
GH3030 / GH3044+1100 ℃StrongSuper-heat overheater
Technical parameter table · Point type / Typical workCross-reference
Point TypeTypical Work StatusRecommended ModelHeat tube/outside
Overheated vapour 600 °C / 25 MPaExport of the heater / main steamWZPK-Pt100-A-Inconel Whole-Screen-Screen 25-ANSI 2500#-L1000-HartWhole exercise + Inconel 600 welds
Reheated steam 540 °C / 4~6 MPaReheaters are imported and exported.WZPK-Pt100-B-Scalding-Inconel 600- ⁇ 20-Hg/T PN16-L600Gradual + Inconel 600
High pressure for water 290 °C / 25 MPaWater Operator / Save Coal AccessWZPK-Pt100-B- Gradual expansion -1 Cr18Ni9 Ti-Φ 20 -HG/T PN25-L500Gradual + 1Cr18Ni9Ti
Screen overheater 450~580 °C / 15 MPaScreen OverheaterWZPK-Pt100-A-Scalding-Inconel 600- ⁇ 22-HG/T PN16-L800Gradual + Inconel 600
Pack temperature 360 °C / 18 MPaBagWZPK-Pt100-B- direct line -1 Cr18Ni9 Ti- ⁇ 16 - Welding - L300Straight tube + 1Cr18Ni9Ti
Air preheater 30~200 °C / 0.1 MPaAir heaterWZPK-Pt100-B-Darling 316L- ⁇ 16-Franc-L300Straight line + 316L
Frozen temperature 200 ~ 400 °C/ 0.1 MPaSave coal before/ preheaterWZPK-Pt100-B- direct pipe -1 Cr18Ni9 Ti- ⁇ 16 - Frank-L500Straight tube + 1Cr18Ni9Ti
After cooling water spray 400~540 °C / 15 MPaTemperature after cooling the sprayWZPK-Pt100-A-Scaling-Inconel 600- ⁇ 22-HG/T PN16-L600Gradual + Inconel 600
Supercritical main steam 600~630 °C / 25 MPaSupercritical, super-critical, main steam.WZPK-Pt100-A-Creature-Creature-F91+In conel- ⁇ 25-ANSI 2500#-L1000-HartWhole exercise +F91 + stacks
Nuclear Power Standard Island, 2nd round. Road. 280 ~ 320 ℃ / 7 MPaNuclear power, general island steam.WZPK-Pt100-B- Gradual expansion -1 Cr18Ni9 Ti-Φ 20 -ANSI 900 #- L600Gradual + 1Cr18Ni9Ti
Waste generation overheat steam 450 °C / 4 MPaWaste generation overheaterWZPK-Pt100-B- Gradual-Hac-C276- ⁇ 20-Hg/T PN16-L800Gradual + Haps C-276 Welding
Technical Parameter Table · Thermal Piplets / Typical WorkCross-reference
Hot tubing formTypical Work StatusNominal pressureRemarks
Straight lineLow pressure steam / water / water back / smoke≤ 2.5 MPaEconomic programme
Gradual expansion (stepping)Medium-high pressure overheat / reheater4~25 MPaMainstream power plant programme
Whole exercise.Supercritical main steam / HPX exit≥ 25 MPaHigh intensity, long life
WeldingHeat peroxide / flue gas corrosive process4~25 MPaCarbon steel matrix + Inconel / Harsh welding
Welding / screwdriverSave coal / Water / Press steam≤ 10 MPaSimple structure, easy maintenance
ConnectionApply sceneSpecificationsPressure rating
-Frank high.Heat perheater / reheater / main steamHG/T 20615 PN16~PN32 / ANSI 600#~2500#≤ 32 MPa
WeldingHeat persimulators / Save coal / Give the pipe wallsDirect pairing + Inconel≤ 25 MPa
ThreadWater / SteamNPT1/2 / G1/2 / M27×2≤ 10 MPa
CardAdjust depth / test loops for insertionNPT1/2 + Carat≤ 1.0 MPa
Activity FrankFrequently adjust depth of insertionDN25~50 + Bar≤ 1.6 MPa
Output MethodApply sceneSupporting instrument
MV / Do it directlyShort distance, performance testNumeric / DCS mV card
4-20 MA Two-line SystemMainstream power station siteDCS / DAH / Coordinated Control
4-20 mA + HartRemote grouping, parameterizationHart Handheld / 475 Comms
MODBUS RTUMultiple instrument network / RS-485PLC / Industrial gateway
PROFIBUS-PAIntegrated plant integrationDCS / Asset Management System
Technical parameter table · Step / ConsiderationsCross-reference
StepsConsiderationsDecision points
①Point media (vapour / water / smoke / air)Chapter 5 identifies the type of spot and typical work
②Media Temperature / Pressure / Flow Speed6.2 / 6.3 Table identifies thermal tube / protective tube material
③Media vibration properties (combustion pulse / vortex vibration)High vibration, tweak, build / whole + spring support
④Insert Depth and Install SpacePipe 1/3 diameter + Install Space Limit ⁇ Select L and heat tube forms
⑤Medium corrosive (smoke containing S / Cl)Frozen gas corrosive C-276 stacks / Inconel 600
⑥Process Connection (Franc/ Welding / Thread)HG/T 20615 PN 16 ~ PN 32 / ANSI 600 # ~ 2500#
⑦Line-by-line approach and blast-proof requirementsMainstream three-line/ four-line power station; blast protection
⑧Output signal (4-20 maA / Hart / bus)mainstream Hart; performance test four-linear mV direct
⑨Protection level / connect boxIP65 Start; Wet Environment IP67/IP68
⑩Implication / Vibration AccountingAccounting for inherent frequency and long-range cycles by ASME PTC 19.3
ComparativeThermal resistance for temperature measurement at stationsGeneral assembly heat and electrical resistance
Hot tuba.Gradual / Whole exercise / WeldingNo heat tube / simple direct tube
Nominal pressure10~32 MPa≤ 6.4 MPa
Temperature measure limit+650 ℃ (protective tube) / +700 ℃ (hot kit)+600 ℃
Vibration resistanceGradual + spring support, inherent frequency ≥ 60 HzNo defense, long-term vibrations are not working.
Apply the pointHeat perheat / Reheater / main steam / waterMedium low pressure steam / water / smoke
Intensified AccountingASME PTC 19.3GB/T 18404
Life expectancy4-10 years (cycle of major repairs)1 ~ 3 years (power station environment)
PriceHigh (whole-made heat tube is 5-10 times the assembly)Low (baseline programme)
Response time⁇ 25 About 30~60 s (two-layer structure)⁇ 16 About 8-15 s
Installation SpaceHigh ( 600~1200 mm insertion depth required)Low (200~500 mm)
Technical parameter table · Contrast / Thermal resistance for temperature measurement at power stationsCross-reference
ComparativeThermal resistance for temperature measurement at stationsGeneral assembly heat and electrical resistance
Typical applicationsFire stations / nuclear plants / large industrial boilersGeneral industry / Low pressure vapour
Technical parameter table · Periodic / Maintenance contentCross-reference
CycleMaintain ContentCriteria for judgement
Each shiftInspection: indicate temperature, record curve, alarm checkA deviation from historical values ⁇ ±1 ℃
MonthlyThe wire box is sealed, waterproof, ground-checked.No water, no no movement.
QuarterlyInsulation resistance test (500 V mega-e Table)Temperature. ≥ 1000 M once m
BiannualProtection of the appearance of the tube, wall thickness, welding and external examinationNo visible corrosive / crack / perforation
Technical parameter table · Periodic / Maintenance contentCross-reference
CycleMaintain ContentCriteria for judgement
Every time I'm done with it,Heat tube appearance, wall thickness measurement, vibration accounting recalculation, replacement of heat tube or whole unit, if necessaryWall thickness reduction < 1.5 mm; vibration accounting passed
Life expectancy by life expectancyReplacement of protective tube or whole unit dueBased on 4-10 years of life