Beer factory buffer tank static fluid level measurements
Sanitary input fluids, stabilization and surveillance buffers
For buffer tanks between the sugar-to-fermentation process of beer, sanitary static fluid measurements and protection against spills are provided.
Application Scene
Actual scene
Typical performance in the food and beverage industry
The sugared wheat juice of the beer factory is pumped to the fermentation workshop after the buffer can (balance can) has been temporarily stored. Low water levels in buffer tanks cause gas erosion from pump emptys and inhalation of air leads to oxidation of wheat juice; This is the case in the case of the Qatar region, which is a country with a large number of countries with a high water supply, and where over-positioning cans can cause material losses and health problems. The tank belt 0.1 ~ 0.2 bar micro-correction CO₂ protected gas requires instrument sanitation and is resistant to CIP cleaning.
Our Approach
Recommended configuration
8 related products
LT-2000A Input static-level liquid transporter: The probe is 316L sanitary membrane structure, the card is installed to facilitate de-cleaning, the scale range is high by ~3-5 m, and the accuracy 0.5 is sufficient to control the demand. Signal access XMT-7100A display controllers, setting thresholds for low- LSD pumps and HLMP thresholds; The UHZ-50A magnetic rollboard liquid tablets are installed on the side of the can for direct reading at the site. CIP Cleaning Time meters are resistant to the alkalin liquid cycle of 95°C and need not be dismantled.
Pain Points
It hurts a little.
- ! Pumps are empty, which causes oxidation of wheat juice, which affects the stability of the taste.
- ! The general liquid-level counter is healthy and vulnerable to micro-organisms.
- ! CIP Cleaning requires unticking of tables and increased maintenance workload and damage risk
Capabilities
Core competencies
- ✓ 316L Semenal Health Structure, Carcass Installation of Unsanitary Dead Point
- ✓ Static pressure measurements are stable and reliable and adapt to micro-propression CO₂ protection
- ✓ The low-water level automatically stops the pump chain, and the pump is free of air erosion.
- ✓ Resisting 95°C CIP Bed fluid cleaning without dismantling
Related Products
Programme support products
LISEN-LT-100 Submersible Hydrostatic Level Transmitter (Standard)
Type LISN-LT-100
LPG, standard configuration. Input LTP
LISEN-LT-150 Submersible Level Transmitter (Anti-Corrosion Type)
Type LISEN-LT-150
Liquid-level transporter, preservative configuration. Input-level liquid transporter
LISEN-LT-200 Flange Mounted Level Transmitter (Guide-Pressure Type)
Type LISN-LT-200
LPG, conductor configuration. Input LTP
LISEN-MF-100 Magnetic Level Indicator (Side-mounted)
Type LISN-MF-100
Magnetic flipboard liquid meters, side-assembly configuration. Magnetic flipboard is indicated on the ground, and is available for remote transmission.
LISEN-MF-150 Magnetic Level Indicator (Top-mounted)
Type LISN-MF-150
Magnetic flipboard liquidometer, top configuration. Magnetic flipboard is indicated on the ground, and is available for transmission.
LISEN-MF-200 Magnetic Level Indicator (Plastic/PTFE anti-corrosion)
Type LISN-MF-200
Magnetic flipboard fluids, plastic configuration. Magnetic flipboards are indicated on the ground, and are available for transmission.
LISEN-MF-250 Magnetic Level Indicator (High-temperature)
Type LISN-MF-250
Magnetic flipboard liquids, high temperature configuration. Magnetic flipboards are indicated on the ground, and are available for transmission.
VISCON-DIS-300 Universal-Input Digital Indicator / Controller
Type VISCON-DIS-300
Smart Digital Display Moderate, Smart Digital Display Moderate
Related Solutions
Related programmes
You want to know about the program?
Contact us, describe your field work, get targeted options and proposals.
Contact us