SidewearClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-MF-100
Magnetic roller tablets. Side-loading.
Magnetic flipboard liquid meters, side-assembly configuration. Magnetic flipboard is indicated on the ground, and is available for remote transmission.
01
Classification by: Magnetic Rolling Tablet Lamp
02
Structure form: side-loading
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-MF-100 |
|---|---|
| Measurement principle | Magnetic coupling floats lead to a double-colour flipboard field instruction. |
| Mounting | Side (side Flange installation, axle with packaging) |
| Measurement range | 300–6000mm (centre distance) |
| Indication accuracy | ±1mm / ±2mm |
| Medium density | ≥0.45g/cm3 (low detectable density media) |
| Medium viscosity | ≤0.2Pa·s |
| Operating pressure | -0.1–4.0MPa (PN1.0/1.6/2.5/4.0 Optional) |
| Process medium temperature | -40–+150℃ (Standard type) |
| Main chamber material | 304 / 316L Stainless steel seamless pipe (Hastelloy / titanium Optional) |
| Float material | 316L stainless steel (PTFE Optional) |
| Magnetic flag display | Red/white double-colour flipboard (liquid red gas white), wide 22mm Standard bar ruler |
| Flag material | ABS plastic flipboard / whole Stainless steel flipboard (Optional) |
| Chamber flange | DN25 / DN40 / DN50 (PN1.0–4.0), HG/T 20592 Standard |
| Center distance / drain valve | With DN25 sewage valves, top exhaust/floor drain plug head |
| Ingress protection | IP65 |
| Remote transmission accessories | 4–20mA (two-line system) Transmitter / Reed switch Level switch (Alarm point) Optional |
| Dead-zone requirements | Up/down dead zone ≤50mm |
| Applicable standards | HG/T 21584 / JB/T 12083 |
| Suitable media | Water, oils, acids and alkalis, solvent, etc.; storage tanks, response pads, separators Level field instructions |
Product selection
LISEN-MF-100| Code | Body material |
|---|---|
| M1 | 304 Stainless steel |
| M2 | 316L Stainless steel |
| M3 | Hastelloy C276 |
| M4 | Titanium alloy Ti |
| Code | Centre distance (Measurement range) |
|---|---|
| L1 | 300~1000mm |
| L2 | 1000~2000mm |
| L3 | 2000~3000mm |
| L4 | 3000~6000mm |
| Code | Pressure rating |
|---|---|
| P1 | PN1.0 / PN1.6 |
| P2 | PN2.5 |
| P3 | PN4.0 |
| Code | Chamber flange size |
|---|---|
| F1 | DN25 |
| F2 | DN40 |
| F3 | DN50 |
| Code | Flag type |
|---|---|
| A1 | ABS plastic flipboard (Standard) |
| A2 | Full Stainless steel |
| A3 | Ceramic flipboard (heavy medium/high temperature) |
| Code | Float material |
|---|---|
| B1 | 316L Stainless steel float |
| B2 | 316L + PTFE coating |
| B3 | PTFE complete (strong corrosive) |
| Code | Remote transmitter |
|---|---|
| S1 | No teleportation (indicated on site only) |
| S2 | 4–20mA Level Transmitter |
| S3 | Reed switch alarm switch (1–4 dot Optional) |
| S4 | Transmitter + Alarm switch combination |
| Code | Magnetic flag display with scale |
|---|---|
| C1 | No ruler |
| C2 | With scale (mm fraction) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us


