PRODUCT TECHNOLOGY

Smart temperature adapter

Operating principle

Smart temperature adapter.

Use the "two-line circuit back-up power" + micro-power consumption kernel structure: the whole transmitter is connected. 4 - 20 Backway, power supply by backway (work voltage) 8.5 ~ 45 V DC, inside. 3.3 V Low-voltage Field Runs MMU, ADC and HART Modems, static current consumption design in 3.5mA Here, the range of control signal dynamics is 4 - 20mA 。

  1. 01

    1 . Enter Switching and Protection . Universal Input Machine MPU Switching Range Network; Input end TVS and restricted current resistance protection; Cutting / Disruption detection into weak detection of current-based resolution circuit failure

  2. 02

    2 . instrument with magnification front end . Low noise amplifiers with gain numeric switching; thermoelectric doll μV level signal CMR ≥ 100 dB magnification; power consumption budget ≤ 500 μA

  3. 03

    3 . Cold end compensation (CJC) . In-situ measurement of end temperature (platinium resistor/ integrated sensor), accuracy ±0.2 ~ 0.5℃; head-based adhesive sensor to heat CJC point and connector endpoints to eliminate error between the circuits

  4. 04

    4 . Incentives and ADC . Thermal resistance channel microflow incentives (≤ 250 μA, avoid self-heating); 24 -bit ⁇ ⁇ ADC + digitally flat zero, equal resolution 0.001℃ level

Smart temperature adapter selection support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Smart temperature adapter Technical Note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, the technical characteristics and selection features of intelligent temperature transporters are understood.

01

TECHNICAL GUIDE

Overview

(Smart Temperature Transmitter) is a pre-situ intelligence instrument installed directly on or near the thermoelectric doll/thermal resistance sensor to convert the temperature signal to 4-20mA analogue signal superheavy with a HART digital signal. It combines cold end compensation, linearization, quantum-scale composition, digital diagnosis, an integrated form of "sensor + modem" and a standard configuration of modern temperature measurement systems. By installation form, two main categories are head-laying (directly spun on sensor wire boxes) and track-laying (in-situ trunks/ cabinets).

1.1 Boundary of division of labour with smart modem (Preliminary 46)

1.2 A brief history of development

Overview * Project / AnnotationsCross-reference
ItemAnnotations
Product positioningIn situ smart front end of temperature measurement links: sensor signals are converted locally, digitally in situ, transmitted in 4-20mA + HART, anti-disruption capability and diagnostic depth are fully superior to mVL direct transmission programmes
Core valuesCold end compensation in situ (removing of error in the compensation guide), digital linearization, long-range configuration and diagnosis of HART, first table multi-sensor (one-size-fits-all input) significantly streamlined spare parts
Install FormHeader: screw the sensor wire box (B type screw), field offline box; track: DIN35 track installed in the live trunk or cabinet to support one go and two go
Signal systemOutput 4-20mA + HART (1200bps FSK superheavy); input K/S/B/R/E/J/T/N thermoelectric doll, Pt100/Pt1000/Cu50 Thermal electrical resistance, mv / electrical resistance signal
Market patternsImport: Emerson (Rosemount) 248 / 648 / 3144 P, E+H, Siemens, YTA; national production: Chongqing Kawaya, Ion Yu, Omyo, Fukuoka; head-type machine price imported 1 / 3 ~ 1 / 2
Contrast DimensionsSmart temperature adapter (this title)Smart modem (Preliminary 46)
Form PositionSite instrumentation: head-based adhesion sensor or trunk, located in blast-proof areaDisk/box: installation of a cabinet or a security zone track
Level of integrationSensor + One-stop, plant calibration setPure signal interface, separated from sensor installation
Digital protocolPlot HART, in support of Profibus/ FF bus typeUsually simulated output, partially with RS-485
Cold junction compensationOn-site CJC, eliminate error between the circuit lines.CJC, on the end of the cabinet, with a compensatory lead error
Explosive resistanceCost-based installation (Ex ia) is directly used in hazardous areasNo way to get into Ben An's way.
Typical pricesImports 3000-8000 yuan; national production 800-2500 yuanImports 1200 ~ 5000 CNY; national production 200 ~ 1500 CNY
Select LogicNew projects, important circuits, priority when HART management is requiredPriority for retrofitting projects, cost-sensitive, no digital management needs
PeriodPhaseTechnical characteristics
1960s-70sUnit grouping ageTemperature transmitter is mounted (DDZ-II/ III) and installed on dashboards, with long-lined drive of mvolts, with significant error in jamming and compensating guide
1980sMinimise the dual-line system4-20mA dual-line coverage; head-style analogue temperature transmitters appear, in situ conversion of mV signals
Overview / 1990s / HART ImaginationCross-reference
1990sHART SmartRosemount 244, etc. First HART temperature adapters; remote grouping, digital reading, availability of all-powerful input
2000sHigh Precision and Multifunctional0.1% Level accuracy, double channel input (temperature differential measurement), PID variant; group blocker, sensor backup switching
2010 to dateCyclical and wirelessProfibus / FF field bus penetration; WirelessHART / Bluetooth formation; diagnostic deepening to sensor drift detection and thermoelectric precipitation warning
02

MEASUREMENT PRINCIPLE

Operating principle

Use the "two-line circuit back-up power + micro-power consumption kernel" structure.

The whole transvestite is connected. 4 - 20 Backway, power supply by backway (work voltage) 8.5 ~ 45 V DC, inside. 3.3 V Low-voltage Field Runs MMU, ADC and HART Modems, static current consumption design in 3.5mA Here, the range of control signal dynamics is 4 - 20mA 。

2.1 signal chain eight subsystems

2.2 Analysis of Key Rationales

Modus operandi . Serial number / subsystemCross-reference
Serial numberSubsystemFunctions and elements of achievement
1Enter Switch and ProtectA Master Input Machine MPU toggle range network; input end TVS and limit current resistance protection; cut / block detection into weak detection current determination circuit break
2Device Zoom in frontendLow noise amplifier, gain-digital switch; thermoelectric doll μV level signal CMR ≥ 100 dB magnified; power budget ≤ 500 μA
3Cold end compensation (CJC)In-situ measurements of end-end temperature (paralypium resistor/ integrated sensor), accuracy ±0.2 ~ 0.5℃; head-based adhesive sensors to heat CJC point and line end, eliminating error between compensateable lines
4Incentives and ADCThermal resistance channel micro-flow incentives (≤ 250 μA, avoid self-heating); 24 -bit ⁇ - ⁇ ADC + numeric sound zero, equal resolution 0.001℃ level
5Digital linearizationInline IEC 60584 / IEC 60751 full-scale scale tab plug-in; support custom 32 ~ 100 points retweeting non-standard sensors
6Digital filters and blockersGrouped nymphos 0~100s; slide average inhibition of on-site interference; HART remote reading of instant and filter values
7HART CommunicationsBell 202 FSK signal superimpose on 4-20mA (1200/ 2200Hz); support multiple connection (1 host + 15 from); and read PV/ SV/ diagnostic information in round / grouping mode
8D/A Output and Return16-bit DAC + Transistor Constant Flow Output 4-20mA; Output Limit 3.6~21mA with NE 43 signal failure; circuital voltage drops and back protection
· Analysis item / Mechanism descriptionCross-reference
Analysis ItemScheduling
Two-line power supply principleConnect the transmitter, load and power supply in series. The transmitter acts as a controlled current source. Quiescent current is below 3.5 mA, and the 4–20 mA output corresponds to the measured temperature. Loop voltage equals supply voltage minus load and cable drops. Allow at least 8.5–12 V of headroom.
HART superscript mechanismFSK digital signal is equal to zero, without interference with 4-20mA analog readings; communication is conducted simultaneously with analog transmissions; mainstream configurations of HART5/ HART7 protocol are supported
Precision advantages of local CJCHeader CJC point is almost the same temperature as the thermoelectric doll end, contrasting machine cabinet CJC scheme: the latter contains temperature error and exposure between the circuits (up to a few dozen metres) and CJC in situ increases the accuracy of the system by 0.5 ~1 °C
Sensor redundancy versus temperature differenceTwo-channel type with two sensors: main automatic switching (without disturbance switch when main sensors drift or break), temperature differential output mode (T1-T2, for saturation vapour dryness, heat exchanger end-of-side measurements)
Ben-Ann's blastproof.The whole machine is designed to be Ex ia IIC T6 Ga, a standard method for measuring temperature in the hazard zone, with energy limits for normal and malfunctioning, and safety fence (part 42/43) cost of rerouting.
03

PRODUCT STRUCTURE

Product structure

There are significant differences between head and track patterns.

The head is aluminum alloy/ stainless steel shell is wrung in a sensor wire box, and the track is DIN35 orbital module. The following is a description of the main line by head and is accompanied by a guide track difference.

Analysis of strengths and weaknesses

4.1 Advantages

4.2 Disadvantages and responses

Shell

Composition and function: Casting aluminium alloy or 316 stainless steel shells, matching sensor wires boxes, screws such as M22 x 1.5 / G3/4; surface epoxy spray resistant to corrosion

Connector End

Composition and function: Input side: Thermal Emporium / Thermal Retardation Terminal ( spring-coated); Output side: Two-line 4-20mA Return End; BAM type input output line spacing and reptile distance designed to be blastproof

Show windows (select)

Composition and function: LCD numerical engineering volume and circuit current; external induction of magnetic rods, which can be organized without a cap - the blast zone is free of the cap with significant advantages

Main circuit board

Composition and function: MMU + 24-bit ADC + HART Modem + DAC Integrated High-density Board; Three Anti-painting Paints Anti-Crossion Field

CJC Sensor Component

Composition and function: Accomplished in input end zone, copper / platinum resistance or digital temperature sensors, temperature design to reduce gradients

Electrical connection

Composition and function: Output side cable entering through Gran Head; double-sealed structure to isolate the field atmosphere; optional cable straight out (PUR cover cable)

Track Difference

Composition and function: DIN35 Trajectory (heavy 22.5 mm); Independent 24VDC power or circuit power option; end is plugged-in screw type to support double output; no blast-proof shell requirement is installed in a safety zone or in a positive-pressure trunk

Deck and Identification

Composition and function: Model code, blast-resistant grade and certificate number, range, wire-wire graph; this Ant-parameter Uo / Io / Po is marked for back-tracking

Evolutional trends

Structure: Description Composition and function:

Wireless

Structure unit: WirelessHART (IEEE 802.15.4) self-assembled network (SDN) model mature, free of cable, suitable for rotation equipment and remote points Composition and function:

Bluetooth Group

Structure units: Cell phone APP Bluetooth connection, field debugging, gradual replacement of the basic group function of the HART hand-man

Diagnosis deepening

Structure units: Sensor drift trend analysis, thermoelectric pyrotechnic burn / Dust warning, wire corrosion detection, from "sign transformation unit" to "temperature measurement health management centre" composition and function:

Multivariate Output

Structure units: Two channel temperature differentials, multi-band scale, process temperature + sensor redundancy output, one table multiparameter composition and function:

It's a good intervention.

Note: mV / resistance signal converted to 4-20mA in situ, long-line transmission resistance to interference increased by 1 ~2 orders; commo interference compared to mV direct transmission programme fully resolved

Local CJC high precision

Note: Header-typed adhesion to heat cold end compensation points to the end of the line, eliminate error between the circuits and increase the accuracy of the system by 0.5 ~1 °C

HART Remote Management

Description: Remote formation of parameters such as scale, fraction number, blocker, without on-site cover; predictive maintenance in conjunction with AMS / PRM management platform

Everything you can do to streamline spare parts

Note: One machine-type group covers all thermoelectric dolls and thermal resistance types, and plant-wide spare parts are harmonized from more than specifications into one or two

Ben An is in the danger zone.

Note: Ex ia authentication complete machine can be installed in 0 / 1 , and the safety fence will form the complete temperature of the temperature of the circuit.

Diagnosis is rich.

Description: Fault / Disruption Direction Direction Directive (NE 43), Sensor drift warning, ambient temperature monitoring, failure to locate specific links

Two-line cable savings

Two core cables for signal and power, half of the cable and bridge space compared to the four-line programme

Disadvantages and use restrictions

Head-style environmental.

Description and response measures: Accelerator of the high temperature vibration and corrosive atmosphere in the trunk, with a higher failure rate than in the cabinet equipment; selection of the temperature-resistant type in the high temperature setting or transfer of the transducer to the trunk (tracking mode)

This An is a circuit accounting.

Description and response: Accounting for Uo / Io / Po and cable Co / Lo matching, selection error constituting blast-proof violation; cross-checked according to page 42/43, item by item

HART Dependence Management Platform

Description and response: Smart functionality is not functional if the plant is not equipped with a HART or AMS platform; at least handheld is configured and critical devices are recommended for access to the equipment management platform

Backway pressure down limits.

Description and response measures: work voltage floor 8.5 ~ 12 V, budget for circuit voltage for long cable loads; increase power voltage or decrease co-linking equipment, if necessary

The double-channel is expensive.

Description and response measures: dual / bus price is 1.5 ~2 times the single channel; non-temperature differential and redundant demand scenario single channel is sufficient

Magnetic rod group function limited

Description and response: On-site unscreened configurations rely on the HART handman or magnetic bar base menu; complex configurations still require system-level tools; LCD display windows are available for mitigation

Convergence with integrated sensors

Description and response measures: Changers and sensors set calibrated to change and either side needs to be re-engineered; increase in the number of field-based combinations debugged when non-set purchases

04

APPLICATIONS

Application area

The coverage of the process industry is almost complete at temperature measurement points, followed by typical industry distribution and morphological selection practices.

5.1 Five typical application models

Petroleum chemicals

Typical application scenario: multi-temperature measurements in distillation towers, heater export temperature, reactor bed temperature measurements, common pattern and configuration: header type + HART; redundancy of two-channels at important points

Electricity

Typical application scenario: boiler metal wall temperature, main vapour temperature, generator rounding temperature (RTD trilinear) Common form and configuration: track-based centralized installation in trunks; Pt100 input

Metallurgy

Typical application scenario: heater / average heater furnace chamber temperature (S / B thermoelectric doll), co-planting cold zone temperature measurement Common form and configuration: head-based heat tolerance; and cutter warning function activation

Pharmaceuticals

Typical application scenario: fung cabinet / fermenter temperature precision measurement (hygienic) Pt100 Four-line high-precision + HART calibrated archive management

Food and drink

Typical application scenario: bactericide line, cold tank temperature monitoring, wash environment Usual pattern and configuration: IP68 cable straight out; this is an antenna for alcohol tank area

Water treatment

Typical application scenario: water temperature monitoring, disinfection process temperature, point dispersion Common form and configuration: guide track or WirelessHART wireless

Warming cooling.

Typical application scenario: heat exchange station for water temperature, cold-line water temperature, common pattern and configuration: track economy; two-lined simplified wiring

Mode

Typical application scenario: signal path Usual form and configuration: key points

Head book is temperature-proof.

Typical application scenario: hazardous area thermoelectric dolls poach head-forming Ex ia transceivers poaching safety fence poaching DCS common pattern and configuration: four variations for this Zero Parameter; compensatory guide to the transducer

Orbital concentrated temperature measurement

Typical application scenario: multiple RTD ⁇ In-situ trunk tracker ⁇ 4-20mA Compile into the control room Common form and configuration: Pt100 Trilinear to the trunk; Two in and out Distribution display

Two-channel temperature differential measurement

Typical application scenario: two RTDs, each of which enters a two-channel ⁇ Transmitter output T1-T2 Temperature variance 4-20mA Common form and configuration: used for heat exchanger end-side differences, vapour dryness; two sensors paired with specifications

Sensor redundancy master

Double sensor master switch ⁇ Singleway 4-20mA output + HART status position Main sensor break-up without disturbance switch to backup; lock-backing recommended configuration

Wireless temperature measurement

Sensors WirelessHART Transmitters Wireless Grid DCS/ history suitable for rotation equipment, remote canisters; Battery life 5-10 years

05

TECHNICAL SPECIFICATIONS

Technical Parameter Table

The following table shows typical specifications for smart temperature transporters (head-based universal input type HART) that are based on individual manufacturer samples.

  1. 01

    Select Table

The price is a single renminbi-guided price, with two channels and a bus-type floating up.

7.1 Order code structure (example 8 bits)

  1. 01

    Selection Guide

8.1 Ten Elements of Selected Decision-Making

8.2 Typical scene selection path

8.3 Four procurement acceptances

Summary

An integrated field instrument for the "Sensor + Smart Modem + Two-line Power + HART Digital Identity". The division of labour with the 46th Smart Modem is "In situ Integration vs Armor Separated": New projects and important road-receiving priority transducers (diagnostic, precision, blast-proof, remote management) are fully optimal, and cost-sensitive modifications and general monitoring can follow the track-based modem programme. So, all five sets of back-way interfaces (separators/separators/security fences/ modems/ temperature adapters) have been completed.

Technical parameter table . Serial number / parameter itemCross-reference
Serial numberParameter ItemTypical specification
1Input typeThermal electromechanical doll K/S/B/R/E/J/T/N (IEC 60584); Thermal electrical resistance Pt100/Pt1000/Cu50/Cu100; mv-10 ~100 mV; electrical resistance 0 ~ 4,000; universal input group exchange
2Output signal4-20mA Double-line + HART 5/7 (1200bps FSK); optional 4-20mA numbers only (non-HART) or Profibus-PA/ FF bus type
3Basic AccuracyMainstream ±0.1% ~±0.2% Quantities or ±0.15 ~ ±0.5℃; High Precision ±0.1℃ (QPt100 narrow range); Linearization and CJC Combined Error
4Cold junction compensationInternal CJC ± 0.2 ~ 0.5°C (head-form thermos design); partially supported external connection Pt100 accurate reimbursement
5LinearizationFull-scale table plugins; support custom 32 ~ 100 points folding; mv / Om input two-point grouping linearity
6Cuts / BreaksOutput Up to ≥ 21mA Or down to ≤ 3.6mA (NE 43 (c) Disaggregatable; HART diagnostic repository log failure code
7Interdiction and filteringBlocked-time constant 0~100s groupable; default 2~5s smooth display and control
8Work voltageBackway power 8.5~45V DC (non-Benz); physical extent of Ben-An-Return road following the security fence is measured by fencing parameters; load capacity 0~ (Vsupply-8.5V)/23mA times
9Static power consumptionStatic current ≤ 3.5mA; whole power ≤ 60 mW (24 V time)
10HART CommunicationsBell 202 FSK; multi-strength 1 Main + 15 from; Supporting Breakout Mode and Device Status Command (HART 7 Extension Diagnostic)
11Dual ChannelsDouble input: main redundancy switch, temperature differential output (T1-T2), two-way independent output (two-way track); separation of channel 500V
12Bomb protection certificationEx ia IIC T6 Ga (this is an ant, 0 is available); Ex d IIC T6 Gb (explosive); this Ant parameter Uo / Io / Po See emblems
13Environmental conditionsWorking -40 ~ +85℃ (shell class); selection of temperature resistant in high temperature settings (-40 ~ +120℃ applied by applying temperature reduction in a connector box)
14Ingress protectionIP66 / IP68 (hull); the protection of the wired box depends on the installation process
15Display and configurationLCD Numeric (select)+ Magnetic Bar External Operation; HART Handheld / PC / Bluetooth APP Grouping; organiser parameter electrocution maintenance
16Insulation and installationInput output segregation 500V AC (separate); head M22 x 1.5 / G3/4 / 1/2NPT screwdging; guide track DIN35 card thickness 22.5 mm
17StabilityLong-term stability ±0.05% / Year; double-channel support drifting trend logs and sensor ageing alerts
18AuthenticationATEX / IEC Ex / CCC blast protection; CE / UL / RoHS; measuring device type approval (CPA, for trade and measurement)
TrancheRepresentative brand and seriesTypical Configuration & PrecisionSingle-desk priceTypical applications
Technical parameter tables · Imported high end / Rosemount 3144P/ 648; E+H iTEMP TNT; Trans-Wide YTACross-reference
High end of importRosemount 3144P / 648; E+H iTEMP TNT; YTA, Trans-Hexa±0.1℃ level; double channel redundancy/temperature differential; HART7 depth diagnosis; full authentication3000-8000 yuanMajor Process Backway, SHSS PICS, Export Project
Standards of importSiemens SITRANS TH; ABB series±0.2% level; single channel universal input; HART standard functionality2000~4,000 yuanJoint venture, electricity and metallurgical packages
The country is a good place.Chongqing Kawashi/ Rainbow Yu NHR/ Upper±0.2% class; double channel; bluetooth grouping; Ex ia full authentication800~2500 yuanNew project main, dangerous area temperature measurement, unified spare parts
Universal national productionLocal instrumentator common series±0.5% level; fixed fraction number; 4 - 20mA no HART or simplified HART300-800 yuan.General monitoring points, adaptations, budget sensitive settings
bitsMeaningCommon take-up examples
1Broad categories of productsT = Smart temperature adapter
2Install FormH (head); R (guided); W (wireless)
3Input typeK/S/B/R/E/J/T/N (thermal volts); P (Pt100); M (mv); X (gift input)
4Output SystemA (4-20mA + HART); P (Profibus-PA); F (FF bus); D (pure 4-20mA)
5Channels and Functions1 (one channel); 2 (two channels with temperature differentials); B (two channels with redundancy)
6Explosion protection markingI (Ex ia Benan); D (Ex d implosion); N (explosion-free, safe zone)
7Show OptionsL(LCD count); M(LCD + Magnetic Stick operation); 0 (blind table)
8Other OptionsH (high accuracy ± 0.1°C); T (high temperature-resistant crust); C (CPA measurement certification); default base
Technical parameter tables · Decision-making elements / Decision pointsCross-reference
Elements of decision-makingElements of judgement
Is it dangerous or not?The temperature measurement in the hazard area must be based on the Ex ia type, which is attached to the safety fence, or the blast-proof type; the safety zone may be selected by the generic - first red line
Install FormSensors close enough to head (provincial trunks); centralized temperature detection, environmental distress, maintenance of frequent selection tracks
Accuracy classGeneral process ±0.2% level is sufficient; measuring differences in temperature from precision ±0.1℃ high accuracy
Double-channel requirementsDouble-channel redundancy of locks and key circuits (main gear switching); heater-side differential / dry scale temperature selection mode; normal point single channel
Digital protocolHART; Plant-wide bus structure Profibus-PA/ FF; no platform at least retains the HART capability to leave the future behind
Sensor MatchThe fraction number and the scale range shall be consistent with the sensor; the high-precision field adaptor and sensor sets shall be ordered and calibrated as a whole
Backway voltage budgetPower voltage - Safety Fence Depression - Cable Pressure Depression Zirconium Carrier Minimum Working Voltage (8.5 ~ 12 V), Road Back Accounting
Environmental conditionsHot-resistant or moving to a trunk; corrosive atmosphere selected stainless steel shell / tri-painted
Configuration methodPop-free area needs to select a magnetic bar + LCD; batch debug bluetooth APP; platform management HART + AMS / PRM
Spare parts strategyThe plant-wide universalization of the machine, which constricts spare parts from more than specifications to one or two
Technical Parameter Table · scene / Recommended SchemeCross-reference
sceneRecommended programmeRationale
The fertilized distillation tower. 60 points of temperature.Header Ex ia Superintend HART + Security FenceIn situ CJC high accuracy; HART access to AMS platform; Ben in danger zone
Boiler metal wall temperature 200 points of concentrated monitoringTrack Pt100 input centralized installed in local trunksRTD signal changes almost, saves the cable, and then concentrates on maintenance.
Reactors chain temperature (SIL2)Double channel redundancy, primary sensor + single-way output + diagnostic bitSingle point failure is not detected; HART status position for chain logic determination
Remote tank areas 10 points temperature measurement (without cable ditches)WirelessHART Wireless+ GatewayFree of cable, batteries 5-10 years, lowest combined cost
LinkThe point of acceptance.
1. Check-in on arrivalModel 8 bit-by-step check (form / input / output / blast protection / display); blast-proof certificate numbers match the sign; HART version is compatible with existing platforms
2. Precision testsSignal source / Standard Retardator check output with five points; check CJC: Short-link thermopet input endpoint, output should indicate end subtemperature ⁇ to compensate accuracy
3. HART Functional ValidationHandheld communication, parameter reading and writing, remote change of range and diagnostic command item by item; uniqueness check of the next question address on multiple-link networks
4. Aging and stability of access to electricity72 Quantities of zero points re-screened after hourly electrical run-off; long-term stability indicators for spot checks; list of security fence checks with this parameter in calculations book