PRODUCT TECHNOLOGY
Stainless steel-resistant diaphragm-resistant pressure table
Operating principle
The stainless steel is resistant to the seismic diaphragm.
(Face types YTNXC-ML/MF, YNTPXC-BF series) are the "top-up" form of mechanical pressure meters, which combines all five core technologies of the pressure gauge family: total stainless steel (povability)+ diaphragm separator (combative/cryl/closing)+ shell oils resistant to vibration (antiviation/pulse)+ magnetic aided receivers (alert/control)+ field instructions (read) Summarine: in a vibration environment, corrosive/high viscosity/cordable crystall medium, field-based instruction and output control signals - this is the final answer to mechanical pressure meters when these four types of demand are present. (a) Filling the shell with seismic silicon oil to absorb mechanical vibrations and pressure pulse energy: inhibiting pointer vibrations and ensuring clear readings in the vibration environment; Five technology superimposed while error
- 01
The measured medium pressure P is used in diaphragm film (optional 316L/Hallium/Monnell/Turnium/PTFE);
- 02
(a) Diaphragm deformation, compression of sealing fluids within closed systems, forming P- ⁇ P pressure ( ⁇ P is the loss of membrane rigidity);
- 03
Seal fluids transfer pressure to the spring tube and the medium is not entered through the surface - strong corrosive, high viscosity, crystallization, non-compression of the particle-bearing medium,
- 04
(a) Tableboard setting of 1~2 root set pointers (open/ closed optional, 100 ⁇ extended to 3~4 group points);
Structure
The stainless steel is resistant to the seismic diaphragm pressure table.
YTNXC-150-MF / YNTPXC100BF-MF (French connection, e.g. DN50) YPXH(N)/YPXG(N)/YPXHD(N) (film membrane measurement type, <0.1MPa micropressure) Configuration options: Filling membrane seals, instrumentation fluids, distillers (uplifting media temperature caps), double-range tablets, panel installation (ZT) model logic: Y+T (seismic)+N (shock resistance)+X (wielder point)+C (magnetic assistance)+ BF (total stainless steel)+ Table + ML/MF (spinted/French). Implementation standard: JB/T 9273-1999 (power point pressure table); The diaphragms are cross-referenced to JB/T 8624; Verify execution of JJG 52
- 01
Imbrane separator (pressure) diaphragm, diaphragm, flannel (DN15~DN50, etc.)/screwn head, sealed gaskets exposed and isolated media
- 02
Pressure transfer systems • Sealed fluid (silicate oil), direct/cracker/blower channel • Transmitting pressure
- 03
• All stainless steel watch casings, filling with seismo-silic oil, spring tube (<10MPa C tube / ≥10MPa helix / <0.1MPa film type), core, pointer, palette, blocker, big pointer
- 04
• Set the pointer, magnet, head-to-head group, wire box/ stainless steel plug-in;
Application area
The stainless steel is resistant to the seismic membrane membrane pressure table.
Semenal relays ⁇ Contact/Electromagnetic Valves ⁇ Pump/ Valve Actions; or Acoustic Light Alerts. Classic applications: Corrosive media delivery pump protection - export pressure below lower limit alarm (air rotation protection), higher than upper limit alarm and lock-in pump, read directly on the field table.
- 01
1 Typical application scenario ( "Cross/Crystal media + Vibration + Control Demand" triple-repeated project)
- 02
Clean medium + no vibration + just watch normal table Y;
- 03
Corrosion + only look at stainless steel table YB;
- 04
Vibration + clean + only watch the shock-resistant table YN/YBN;
Selection Guide
Stainless steel resistant diaphragm pressure table
Quiet load measurement cap 3 / 4; Short-time impact Quantities range (within 130% capacity); Numeric control requirements for ±4% FS based on the set accuracy (±4% FS does not meet the variance option).
- 01
(a) The name of the detected medium, corrosivity, viscosity, crystallization/particle (decision of diaphragm material and form of connection);
- 02
Control requirements: upper- and lower-limit set values, number of nodes, open/closed, alarm or chain (decision on the form of nodes);
- 03
Work pressure range ⁇ Quantum range (silent load ≤3 / 4 cap);
- 04
Environmental vibration level and medium pulse (confirmed to be seismic);
Model Selection SELECT A MODEL
1 ModelStainless steel is seismic diaphragm pressure table selection support
Provide survey missions, media and installation conditions and obtain product configuration advice.
Contact us
