Water and sewage Process level programme

Sewage treatment exposure gas flow measurement

Gas-supply measures + temperature-pressure compensation, exposure to energy-savings

Provide gas flow measurements for sewage-treatment exposure systems, supporting accurate exposure control and wind optimization.

Sewage treatment exposure gas flow measurement

Application Scene

Actual scene

Typical work in the water and sewage sector

Exposure is the largest energy-consuming unit in a sewage treatment plant (40% - 60% of the total plant). The wind-driggers supply gas to the exposed gas pool, which needs to be adjusted to the dynamic of the water load: the lack of gas leads to excess nitrogen from the audible auroral and excessive waste of electricity. Air pipeline traffic measurement is difficult in the long term: gas is wet, pressure fluctuations, and the direct section is inadequate.

Our Approach

Recommended configuration

4 related products

Exposure main and bronchial configuration LRT-100A Thermal gas mass flow meter: direct measurement of air quality flow does not require temperature compensation, and insertions require low direct-pipe requirements and are suitable for retrofitting projects; Wind machine exports are equipped with pressure transmitters to monitor network pressure. Flow signals are connected to the ACE control system, which adjusts the wind engine 's locomotive openings to the dissolved oxygen (DO) values to achieve demand-driven gas supply, and exposure energy consumption can be reduced by 15% ~25%.

Pain Points

It hurts a little.

  • ! The supply is constantly operating with experience and exposure energy is high.
  • ! Wet gas causes the pressure-rate pressure line to be blocked more frequently.
  • ! The flow of the bronchials is not transparent, and the gas is not even distributed among the pools.

Capabilities

Core competencies

  • ✓ Thermal direct measurement of mass flow without temperature compensation
  • ✓ Insertion installation for breakout tube suitable for stock retrofit
  • ✓ Batteries are independently measured, gas distribution balances quantifiable
  • ✓ Controlled by exposure on demand, reduced by 15% to 25%

You want to know about the program?

Contact us, describe your field work, get targeted options and proposals.

Contact us