Waterproof.Click on the picture to zoom in.

PRODUCT SPECIFICATIONS

PRETRAN-DM-150

Smart-silli-pressure transmitters. Waterproof.

Smart-spread silicon pressure transmitter, waterproof configuration. Spread silicon sensors, high value.

01

Classification: Smart diffusion of silicon pressure transmitters

02

Structure form: water protection

⁇ Return smart diffusion silicon pressure dispenser classification

TECHNICAL SPECIFICATIONS

Technical specifications

PRETRAN-DM-150

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelPRETRAN-DM-150
Measurement principleDiffused silicon piezoresistive core + digital signal processing (smart)
Measurement typeGauge pressure (G) / Input level (L)
Measurement range0–10kPa to 0–10MPa (turndown ratio 10:1 Adjustable)
Accuracy class±0.25% / ±0.5% (Optional)
Overload capacity2 multiple Full scale (in a moment)
Ingress protectionIP68 (all welding waterproof seals, long-term immersion)
Output signal4–20mA (DC) two-wire / 4–20mA+HART / RS485 Optional
Power supply12–36VDC (standard 24VDC), Two-wire Loop power
Load capacity(supply voltage -12V) / 0.02A, max 600Ω
Sensor core316L isolation diaphragm diffused silicon core, double O loop + silicon cable sealed
Process connectionM20×1.5 male thread / Input G1DN25 hanged sediment hole
Cablesφ7.5 waterproof air cables (standard 5m/10m, maximum 100m)
Display type3½ bit LED digit display / 4 bit LCD (Optional)
Damping time0–15s Configurable
Stability±0.2% /year
Process medium temperature0–+70℃ (normal temperature) / -20–+85℃ (Low-temperature type Optional)
Ambient temperature-40~+85℃
Relative Humidity0–100%RH (Long-term underwater work)
Ingress and explosion protectionEx d II C T6 Gb / Ex ia II C T4 Ga (Optional)
Electrical connectionIntegrated waterproof cable straight out (no exposed end of line)
Applicable standardsGB/T 17614 / IEC 61010 / HART 7
Suitable mediaWater, sewage, oil; deep well water level, reservoir/river Level, tank input Level, etc. wet immersion

Product selection

PRETRAN-DM-150
Structural uses
CodeStructural uses
S1Pressure type (with process interface M20×1.5)
S2Input type level (G1 sink + hung)
Range options
CodeRange options
R10~10kPa(1mH2O)~0~100kPa(10mH2O)
R20~100kPa~0~1MPa
R30~1MPa~0~10MPa
Accuracy class
CodeAccuracy class
E1±0.5%FS
E2±0.25%FS
Output signal
CodeOutput signal
O14–20mA Two-wire (Standard)
O24~20mA + HART
O3RS485(MODBUS-RTU)
Isolation diaphragm material
CodeIsolation diaphragm material
M1316L Stainless steel
M2Hastelloy C276
Length of waterproof cables
CodeLength of waterproof cables
C15m (Standard)
C210m
C320m / 50m / 100m (Specify when ordering)
Display type
CodeDisplay type
L1No display (Standard)
L23½ bit LED digit Display
L34 bit LCD display + Key change
Explosion protection marking
CodeExplosion protection marking
X1Non-Ex
X2Flameproof Ex d II C T6 Gb
X3Intrinsically safe Ex ia II C T4 Ga

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
PRETRAN-DM-150 Diffused Silicon Pressure Transmitter (Waterproof)