PRODUCT TECHNOLOGY

Carpentry resistance to leaking thermoelectric dolls

Operating principle

Card-based grinding resistance to leaking thermoelectric dolls ..

The core working principle is that "thermal power of Sebak + card seal + compound grinding head + leakproof structure" overlaps four and one heat electrical effect: K / N / E vs. conversion of temperature to mV signals based on the Sebek effect; 2-calorie seals: pre/post-calorie cartons are sealed to metal with metal taken over from the French, with zero leakages; 3 compound milly: stacking + spray + pouring + embedding rigid alloy 4 (b) Process superstitions, with high-speed coal powder washed; 4 Leak structure: single/ double/ third/ fourth floor/full seal multi-level insurance with a leakage rate of zero. Thermal power effects are the core physical principles of thermoelectric dolls. Card-set resistant to leaking thermal voltage using three main semi-colons: 1K (NiCr-NiSi):

  1. 01

    200 ~ +1260℃, high temperature stability superior to K type ( "short-range and orderly" drift for long-term use in +600℃), mainly for nuclear power, one circuit and high-parameter ultracritical units; Type 3E (NiCr-CuNi): Temperature range

  2. 02

    200 ~ +840℃ High heat power ( 68.5 mV/ 100

  3. 03

    ND Steel, HRC-K 55 thickness) 2 ~ 5mm ; 3 meso-level: ultrasonic spray or plasma sprayed aluminium oxide/chromium oxide ceramic layer, thickness

  4. 04

    1 Physical input · Coal powder gas flow + Sprint + High temperature + Media temperature + 0~600 °C

Card-set pretense-resistant heat-scattered voltage support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Card-based grinding resistance to leaking thermoelectric dolls Technical note

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, the technical characteristics and selection features of card-set resistant to leaking thermoelectric dolls are understood.

01

TECHNICAL GUIDE

Overview

(Ferrule-Type Wear-Reistant Leak-Proof Thermocouple) is a dedicated industrial thermoelectric doll designed for the export of coal mill grinders, coal plume delivery pipelines, cement cyclone separators, high-heavy furnaces, gas furnaces such as coal-chemicals, circulated bed boilers, etc. It introduces two key technologies, "Class Seal + Leak Structures" based on normal grinding electron dolls, with a mechanical card tightening to achieve "zero leakage", while complex grinding heads can withstand high-speed flushing of 0.5 ~ 5 g/ m³ powder particles (typical current speed 20 ~ 40 m/s).

1.1 Product positioning and value

In the powder system of the fire plant, the medium of key stations such as coal mills, coal powder pipes, coarse powder separators, fine powder separators and so forth is high-speed coal powder gas flow, with three main engineering difficulties: the pulverization of coal powder particles causes wear and tear of the general thermo-pattery protection tube (only 3-6 months of service for the normal 304 protective tube); (b) The pressure differential within the coal powder pipe is as high as 0.5 ~ 2 MPa, which is easily leakable by common screws; Coal powder media are sulphur, flammable and may cause spontaneous combustion or even dust explosions after leakage. Carpentry resistant to leaking heat voltage addresses these three main challenges, and by durability, it is twice as many times as 3 ~ 5 for a normal grinding thermomechanical voltage.

1.2 Brief history of technological evolution

Four main stages were passed.

① 1980 Years: regular grinding electrons appear, using welds to grind heads, but the connection is still screwdriver, leakable; ② 1990 Years: Single-story card sealing programme, leakage rate reduced 10 Pa· m³/s However, long-term operational wear and tear remains a problem; ③ 2000 Age: compound grinding head (stamping + spraying + pouring) + double-layered leakage structure appears and life is extended 1 ~ 2 (a) Years; ④ 2010 Age to date: Four Layers / Full Seal Fault Structure + Smart Diagnosis (NE) 107 ) A predictable window period is created and is maintained through NAMUNE 107 Status classification is integrated with DCS.

1.3 Comparison with normal grinding electrocution

The normal milly-resistant electromechanical dolls rely mainly on grinding head (e.g. weld-resistant grinding alloy) to solve wear and tear problems, but the connection is still screw + fran, with high leak risk, and medium pressure is usually ≤ 1 MPa. The card-set resistant to leaking heat-plugs introduced the "claspose" mechanical structure, which makes the front and back-clasplugs mechanically sealed by the card-sniffed bolt. 6.4 MPa Over, leakage rate ≤10 ⁸Pa·m³/s。 High pressure differentials in the case of coal mills, coal powder pipes etc. (discretion)

  1. 01

    5~2

MPa) The card-set programme is almost the only reliable one.

Table 1-1 Card-based mainstream global plant and representative model for grinding and leaking electro-mechanics Ferrule-TypeWear-ReistantLeak-ProofThermocoupleFerrule-TypeWear-ReistantLeak-ProofThermocouple

  1. 01

    Head grinding (hard alloy/complex ceramics) addresses wear and tear, through card sealing, leaking structures, self-burning risk through full-sealed trunks, with a serviceable life

  2. 02

    + 1~3

General description · Serial number / BrandCross-reference
Serial numberBrandTypical ModelMain-play featureMain markets
1National production: Shanghai automation machineWRN-K card set / WRN-M Retardable Gap SeriesMainstream within countries / 30 years cumulativeFire, electricity, coal, cement in China.
2National production: Automaticization of the Hangzhou ChunjiangWZC series card set for millingMiddle marketChina Coal Chemical, Metallurgy
3National production: Central Ring TemperatureWRN-K seriesBulk productionChina Fire and Light, Cement
General description · Serial number / BrandCross-reference
Serial numberBrandTypical ModelMain-play featureMain markets
4Nationally produced: Chongqing Kawa YiWR series card set for grinding / leakingHigh-quality domestic brandsChina electricity, nuclear power.
5Wika (Germany)TC10-A series card set for millingThe first on the global thermometer.High-end fire, nuclear power.
6Yokogawa (Japan)BARTEC/ TC SeriesJapanese industrial millingJapan, South-East Asian power plants
7Jumo (Germany)TC 901 Series Card set for millingHigh-end European brandsEuropean Coal Chemical, Garbage Power Plant
8Endress+HauseriTHERM TM411 / TM611Global Industrial MatrixHigh-end markets, nuclear power
02

MEASUREMENT PRINCIPLE

Operating principle

The core working principle is that "thermal power of Sebak + card seal + compound grinding head + leakproof structure" overlaps four and one heat electrical effect: K / N / E vs. conversion of temperature to mV signals based on the Sebek effect; 2-calorie seals: pre/post-calorie cartons are sealed to metal with metal taken over from the French, with zero leakages; 3 compound milly: stacking + spray + pouring + embedding rigid alloy 4 (b) Process superstitions, with high-speed coal powder washed; 4 Leak structure: single/ double/ third/ fourth floor/full seal multi-level insurance with a leakage rate of zero.

2.1 Thermal electrical effects of Sebek

Thermal power effects are the core physical principles of thermoelectric dolls. The card-set resistant to leaking thermal voltage is based on three semi-colons: 1K (NiCr-NiSi): temperature range -200 ~ +1260 ℃ , common 0 ~ +600 ℃ Thermal power. 4.096 mV / 100 ℃ , Precision ±0.4%FS , is the Main Spectrometer of the Fire Power Plant; Type 2N (NiCrSi-NiSi): Temperature range

  1. 01

    200 ~ +1260℃, high temperature stability superior to K type ( "short-range and orderly" drift for long-term use in +600℃), mainly for nuclear power, one circuit and high-parameter ultracritical units; Type 3E (NiCr-CuNi): Temperature range

  2. 02

    200 ~ +840℃ High heat power ( 68.5 mV/ 100

°C, but applies at lower temperatures, mainly in low temperature wear and tear.

2.2 Carat sealing principles

Card seals are the core technology for addressing the leakage of coal powder media. The structure consists of a front, back, cardiac, card nut: a front card set (V or L type): bound to the card, which produces a trajectory deformation by pressure or twist; (b) 2-post-card ( straight-cylinder type): tie to the outer wall to provide axle support; 3-calories (stainless steel springs): long-term sealing guaranteed by flexible deformation; 4-carat screws: Provide axle-direction twists, and compress the front / back card to the interior to form a mechanical seal. The pressure resistance of the card seal can be as high as 6.4 ~ 25 MPa, the leakage rate ≤10⁸ Pa. m³/s, which is much better than the normal screw connection (the leakage rate 10³ ~10⁴ Pa. m³/s).

2.3 Composite milling process

Composite grinding head is the core component of the solution to the dusting of coal powder particles, usually superimposed by 4 processes: 1 Cr18Ni9Ti / 316 L stainless steel pipe, wall thickness 4 ~ 6mm, subject to basic temperature and pressure; inner layer: welding (arc welding/plaster welding)

  1. 01

    ND Steel, HRC-K 55 thickness) 2 ~ 5mm ; 3 meso-level: ultrasonic spray or plasma sprayed aluminium oxide/chromium oxide ceramic layer, thickness

  2. 02

    1~0.3

mm; 4 outer layer: compound pouring or mosaicing rigid alloys ( YG6X / YG8 Hard alloy particles), which form a three-story composite structure of "metal + ceramics + superhard particles", with a milling lifetime of a normal stack of welding heads. 3 ~ 5 Multiply, affordable. 0.5 ~ 5 g/ m³ Coal powder flow speed 30 m/s high-speed flush.

2.4 Discretion structure

Leak structures are key to the distinction between card-set programmes and ordinary grinding programmes. I'll give you a rating on the leak. 5 Cat: 1 single layer of leakage: card seal only, applicable to 1 MPa The following; 2 Double leakage: card + O Circle / Lip Seal double sealed, applicable to 2.5 MPa ; Three layers of leakage: carving + seal + metal graphite twig pads for 4MPa; Four layers of leakage: card set + seal + entanglement pad + double hardened, applicable to 6.4 MPa; 5 All sealed: 4 layers of leakage + welding + online monitoring pressure, applicable to 10 MPa Above pressure differentials.

Ferule-TypeWear-ReistantLeak-ProofThermocouple Table 2-1 card set to resist leaking thermoelectric doll workflow (8 moves)

Ferrule-TypeWear-ResistantLeak-ProofThermocouple

Motion of work . Step / Signal phaseCross-reference
StepsSignal phaseMain processingOutput FormKey parameters
1Physical inputGas Flow + Sprint + High TemperatureProcess medium temperature0~+600 ℃
2It's a grinding-eat.Composite ceramic + hard alloy bufferPost-buffer temperatureTemperature ≤ 5 ℃
3Protect the tube heat.316L / 1cr18Ni9Ti protection tubeSteady temperatureResponse 8-30 s
4Thermal power effectsK/ N / E type Illosezebeck EffectThermal power MV4.096 mV / 100 ℃
5Cold junction compensationSemiconductor / Pt1000 CompensationFix thermal powerCompensatory precision ± 0.5 °C
6Carp's sealed.The mechanical card is tight to prevent the media leak.Zero leak.Leakage rate ≤ 10 ⁸
7Leak-resistant constructionMulti-level seal insuranceMulti-level zero leak.5-optional
8Junction boxFull Seal + Detonation (optional)MV signal + shieldIP65 / Ex d
03

PRODUCT STRUCTURE

Product structure

A modular mechanical structure consisting of 12 core components such as connect boxes, compensatory guidance lines, protective tubes, composite grinding heads, card-sealed assemblies, leak-proof structures, etc. Class 6 by structure: straight, corner, insertion, French, screw, welding, corresponding to different installation settings. Class 3 by card specification: ⁇ 16 / ⁇ 22 / ⁇ 27, matching the common diameter of the pipe.

Table 3-1 Carats resistant to leaking thermoelectric doll 12 Widget Table Ferrule-TypeWear-ReistantLeak-ProofThermocouple Table 3-4 Cards resistant to leaking thermoelectric doll 6 Class Structures serial number structural pattern feature typical application of Ferrule-TypeWear-ReistantLeak-ProofThermocouple

Junction box

Main function: Connecting to compensatory guide + Protection Key materials/processes: Aluminium alloy cast / stainless steel Fault mode: Sealed failure

Compensatory guide

Main function: Cold end extension + shield Key material/process: KX / NX / EX shielding lines Fault mode: short circuits, shielding break

The protection tube.

Main function: Insulation medium + protection of myvatar Key materials/processes: 316L / 1Cr18Ni9Ti Fault mode: corrosion, wear

I'm insulated.

Main function: Electrical separation diode Key material/process: high purity aluminium oxide porcelain tubes Fault mode: insulation failure

K/ N / E fabric

Main function: Temperature-temperature conversion Key material/process: NiCr-NiSi / NiCrSi-NiSi Fault Mode: Fever, Floating

Quite a grinding.

Main function: To withstand coal powder wash Key material/process: stacking + spray + hard alloy Fault mode: wear, tear

Front card set

Main function: V-Range-to-Classure Key Materials/Process: 316L stainless steel Fault mode: Deformation, cut

Backcard

Main function: Axe-support seal Key material/process: 316L stainless steel Fault mode: loose, deformation

Carcasses / O Circles

Main function: flex compensation + secondary seal Key materials/processes: stainless steel springs/fluorinated rubber Fault mode: ageing, fracture

Carpenter nut.

Main function: Provide axle-sealed twist key materials/processes: 316L / 35Crmo high intensity failure mode: screwdriver wear

Take over Frank/ Sniff

Main function: connect to the pipe. Key material: 1Cr18Ni9Ti / 316L flange. Failure modes: leakage and loosening.

Decorations and signs

Main function: Model / Serial / Serial / Key material/process: stainless steel punch / Laser printing Fault mode: Decline, Corrosion

Grinding Head Type

Welding mills.

Process method: arc welding / plasma welding 6 hard degree HRC:HRC 55~60 Typical application: coal powder pipe, coal mill exit

Spraying grinding heads.

Process method: Supersonic flame spray / Plasma sprayed aluminium oxide Hardness HRC:HV 1000 ~ 1200 Typical applications: high-speed coal powder flow, fly ash pipe

Combination Header

Process method: high chrome cast iron + hard phase mixed pour hard HRC:HRC 60~65 Typical application: coal mill export, separators

Embedded hard alloy

Process method: YG6X/YG8 Hard alloy granular mosaics hardness HRC:HRA 88~92 Typical application: high wear / end-of-life

Discrepancies Level

Single-level leakage

Structure composition: card seal only Applicable pressure: ≤ 1 MPa Typical application: low pressure coal powder, ash pipe

Double-delaying.

Structure composition: card set + O / lip seal applicable pressure: ≤ 2.5 MPa typical application: coal grinder export, middle pressure pipe

Three-level leakage.

Structure composition: carp + seal + metal graphite twirl entanglement pressure applied: ≤ 4 MPa typical application: high pressure coal powder, circulation fluid bed

Four layers of leakage.

Structure composition: three layers + two hardened applied pressure: ≤ 6.4 MPa typical application: ultra-high pressure coal powder, gasification of coal-chemicals

All sealed.

Structure: Four Layers + Welding + Online Pressure Monitoring Applies Pressure: ≤ 10 MPa Typical Application: Gasification, High Pressure Steaming

Construction

Straight

Feature: Conservatory tube with lined trunks Typical application: horizontal pipe, vertical top

Angular

Feature: Pips and connect boxes with 90° bends

Insertion type

Characteristics: Reconcretionable depth of insertion

French

Feature: Connecting to pipelines through Frank. Typical application: medium-pressure pipe, container

Thread

Feature: Connecting to pipe through screws

Welding

Feature: Direct welding on the wall of the pipe

04

TECHNICAL GUIDE

Advantages and disadvantages

Designed for high wear-and-pressure scenarios such as coal mill exports, ordinary grinding electromechanical dolls have significant advantages in terms of leak prevention, stress resistance, lifetime, etc., but their high cost, requirements for medium cleaning and the need to replace the grinding layer failure also need to be weighed.

4.1 Main advantages (7 grand)

Ferrule-TypeWear-ResistantLeak-ProofThermocouple

4.1 Main advantages (7 grand)

Grinding + Leakproof Double Protection

Detailed: compound grinding head to address wear and tear (life 1-3 years), card seal + leak structure to address leakage

Anti-high pressure differential

Detail: Full seal up to 10 MPa, with coal powder pipe 0.5~2 MPa pressure unscaught

Long life

Detailed: Use of 1-3 years, 3-5 times the normal grinding electron doll (3-6 months)

Online replacement

Detail: The card structure allows for online dismantling and replacement without a stoppage (but the medium needs isolation)

It's a very interchangeable thing.

Detailed: Standard 16 / 22 / 27 carat specifications, interchangeable with multiple brands

Custom

Detailed: Precious materials, card specifications, leakage-remote levels, connection mode can be customised to medium conditions

It's a high security.

Detailed: Full-sealed structure + blastproof wire box to avoid the risk of a powder leaking self-fire or dust explosion

Disadvantages and use restrictions

It's a high price.

Detailed: Composite grinding head + multi-layer leakage structure price 3000 ~ 15000 CNY, times 3 ~ 5 of a normal grinding electron doll

Medium Cleaning Requirements

Detailed: The requirement for the cleaning of the medium will affect the containment of the card by a large particle jam

Temperature Field Dividing

Detailed: Thermal resistance of complex grinding head is high and response is slow in fast temperature change (8-30 s)

The milling layer is not working.

Detailed: Composite grinding head needs replacement after 1-3 years, complete scraping, not just head replacement

It's a lot of weight.

Detail: ⁇ 22 ⁇ 27 Specification + Composite grinding head weight 2~6 kg, supported when installed

Installation requires high accuracy

Detail: Carplock sprain requires precise control (typically 50 ~ 120 N.m.), perfluorinated, overtly damaged screws

Cold-end temperature effects

Detailed: Need to be matched with a compensatory guide + cold end compensation, heat power signal vulnerable to interference during long-range transmission

05

APPLICATIONS

Application area

The requirements for grinding head material, leakage grade, and connection patterns vary significantly from industry to industry, depending on the specific work situation.

Table 5-1 Card-set resistant to leaking thermoelectric dolls 14 Large and typical application scenario Ferrule-TypeWear-ResistantLeak-ProofThermopooleFerrule-TypeWear-ResistantLeak-ProofThermocouple

Fireworks.

Typical temperature scenario: coal mill export, coarse powder separator Temperature range: +50 ~ +200 ℃ Key requirements: grind tolerance + leakproof + coal powder flushing

Fireworks.

Typical temperature scenarios: coal powder pipes, powderers Temperature range: +50 ~ +150 ℃ Key requirements: millability + card set + leakage

Fireworks.

Typical temperature scenario: fine powder separator / cyclone separator Temperature range: +80 ~ +180 ℃ Key requirements: wear and tear tolerance + high-speed flushing

Coal-chemicals

Typical temperature scenarios: gas furnaces, coal powder transport Temperature range: +100 ~ +800 ℃ Key requirements: high temperature tolerance + blast protection + high pressure differential

Coal-chemicals

Typical temperature scenario: water plaster pipe Temperature range: +50 ~ +300 ℃ Critical requirement: millability + blockage + carat

Cement industry

Typical temperature scenes: cyclone separator, coal powder preparation Temperature range: +50 ~ +400 ℃ Key requirements: grinding + stand-by installation

Cement industry

Typical temperature scenario: Cowder nozzles in rotary kiln Temperature range: +200 ~ +800 ℃ Critical requirement: high temperature + wear resistance

Metal-metal furnaces

Typical temperature measure scenario: Coal blowout / Oxygen blowout temperature range: +50 ~ +200 ℃ Key requirements: milling + blast protection + carats

Oil burns.

Typical temperature scenario: Rotation kiln temperature range: +400 ~ + 900 °C Key requirements: high temperature tolerance + wear resistance

Circulation fluid beds

Typical temperature scenario: Retortor, windboard temperature range: +100 ~ +600 ℃ Critical requirement: grinding + high current speed brush

Biomass boiler

Typical temperature scenario: Slurry particle transport Temperature range: +50 ~ +300 ℃ Critical requirement: milling + blast resistance

Waste generation

Typical temperature scenario: Derived fuel transport from garbage Temperature range: +50 ~ +200 ℃ Critical requirement: grinding + corrosion resistance

Mining coals.

Typical temperature scenarios: Coal mud pipe, floating slot temperature ranges: +10 ~ +80 ℃ Key requirements: milling + card sets + leakproof

Paper black liquid

Typical temperature scenario: black liquid boiler, recovery boiler Temperature range: +200 ~ +800 ℃ Key Requirements: Corrosive-resistant + Grid-resistant

Industries

Industry: Coal powder concentration Typical temperature scenario: current speed Temperature range: differential pressure Key requirements: preferred grinding head, preferred leakage level

Fireworks coal grinder

Industry: 0.5 ~ 2 kg/ m³ Typical temperature measure scenario: 20 ~ 30 m/s Temperature range: 0.5 ~ 1.5 MPa Key requirement: stacking + spray 3rd floor / 4th floor

Gasification of coal-chemicals

Industry: +200 ~ +500 g/ m³ Typical temperature measure scenario: +15 ~ +30 m/s Temperature range: +2 ~ +5 MPa Key requirements: compound pouring + embedded Four floors / All sealed

Cement cyclone separation

Industry: +50 ~ +300 g/ m³ Typical temperature measure scenario: +15 ~ +25 m/s Temperature range: +0.3 ~ +1 MPa Key requirement: stacking + spray Double / Third Layer

Circulation fluid beds

Coal powder concentration: +5 ~ +50 kg/ m³ Flow speed: +5 ~ +10 m/s Difference: +10 ~ +30 kPa Preferred mill: Welding + Spray Preferred Gap Level: Double / Three Layers

Biomass boiler

Coal powder concentration: +10 ~ +50 g/ m³ Flow speed: +10 ~ +20 m/s Difference: +50 ~ +200 kPa Preferred mill: Welding + Embedded Preferred Gap Level: Double / Three Layers

06

TECHNICAL SPECIFICATIONS

Technical Parameter Table

Table 6-1 Card-based Plot-resistance Puppet 22 Integer Table Ferrule-TypeWear-ResistantLeak-ProofThermoupleFerrule-TypeWear-ResistantLeak-ProofThermouple Table 6-3 Card-based PupperTresistance-ResistantLeak-ProofThermopoole Table 5 Type-Descretion Structures

Technical parameter table . Serial number / parameter itemCross-reference
Serial numberParameter ItemSpecificationsTypical values/ranges
1Sensor typeIEC 60584 StandardK/ N / E (main K)
2Temperature rangeIt depends on the fractional and protective tubes.0 ~ + 800 °C (used 0 ~ + 600 °C)
3Measurement accuracyI level ± 0.4% FS level/ II ± 0.75% FSI level ± 0.4 °C or ± 0.4% FS
4And the response time.63% Step Response8~30 s (resistible)
5Conservator diameterMainstream SpecificationsΦ12 / Φ16 / Φ20 / Φ22 mm
6Protection tube materialstainless steel or nickel-based alloy304 / 316L / 1Cr18Ni9Ti / Inconel 600
7Grinding Head TypeWelding/ Spraying / Complexity / Embedding4 Options (see table 3-2)
8Thin-resistant layer thicknessSelect by Media wear and tear3~15 mm
9Hardness of the grinding layerDecision on useful lifeHRC 55~65 / HRA 88~92
10Script specificationMatch the pipe 's common diameterΦ16 / Φ22 / Φ27 mm
11CardsHigh-intensity corrosion resistant stainless steel316L / 35CrMo
12Discrepancies LevelSelect by Media PressureSingle / Double / Third / Fourth / Full Seal
13Pressure resistanceBy the level of the leak1 / 2.5 / 4 / 6.4 / 10 MPa
14Leakage rateAir-container testing≤ 10⁸ Pa·m³/s
15ConnectionConnect to PipelineCarat / Frank / screw / Weld
16Insertion depth LSelect by Pipeline diameter50~500 mm (typical 100~200 mm)
17Explosion protection markingGB 3836 / IEC 60079Ex d IIB / Ex ia IIC
18Ingress protectionThe wire box is sealed.IP54 / IP65 / IP66 / IP67
19Working temperatureElectronic or cabin environment40~+85 ℃
20Cold junction compensationInternal semiconductor compensationCompensatory precision ± 0.5 °C
21Cold-end temperatureTemperature in the connector box20~+70 ℃
22Life expectancyIntermediary wear and tear+1 ~ +3 (coal powder) / 3 ~ 6 months (fly ash)
He's got a hard-on.ProcessHardnessLife expectancyTypical applications
Stellite 6 WeldingArc weldingHRC 556-12 monthsCoal mills, coal powder pipes
ND Steel WeldingArc weldingHRC 5812-18 monthsPowder separator, fine powder separator
Technical parameter table · Grain-resistant material / processCross-reference
He's got a hard-on.ProcessHardnessLife expectancyTypical applications
Aluminium oxide spraySupersonic sprayHV 11006-12 monthsFlying ash pipes, smoke pipes.
Chromium oxide sprayPlasma sprayHV 120012-18 monthsHigh-speed coal powder stream, cement
Composite pouring.High chrome cast iron pouring.HRC 62+18 ~ +36 monthsCoal-chemicals, circulation fluid beds
YG6X EmbeddedHard-end alloy mosaicHRA 88+24 +36 monthsHigh wear, high pressure differential
Technical parameter table • Discrepancies level / structural compositionCross-reference
Discrepancies LevelStructurePressure resistanceLeakage rateTypical applications
Single-level leakageCardette only1 MPa10Low pressure coal powder, ash.
Double-delaying.Cartridge + O Circle2.5 MPa10⁷Coal mill exit, medium pressure
Three-level leakage.Carp + Circle + Entanglement Tiles4 MPa10⁸High pressure coal powder, CFB
Four layers of leakage.rd Layer + Second Tight6.4 MPa10⁸Super-high pressure, gas-combing furnace.
All sealed.Four Layers + Weld + Online Monitor10 MPa10Gasification, high pressure gas stabilization
ConnectionStructural characteristicsCounterpressureInstallation difficultyTypical applications
Cassette ConnectionDouble card system mechanical sealMedium (1~6.4 MPa)Medium (Twisted Control)Fireworks Coal Powder Pipeline
Flanged connectionPN25 PN16 / PN40 FrankHigh (6.4 ~ 10 MPa)Medium (strength tight)Medium-high pressure pipe, container
Threaded connectionM27x2 / G3/4 screwLow (≤ 1 MPa)Low (boiled)Low pressure pipe, equipment
Weld ConnectionCounter-weld + Seal allHigh (6.4 ~ 25 MPa)High (welding required)Permanent installation, high pressure
Load the connection.Triple claws and + SealLow (≤ 1.6 MPa)Very low (hand-carrying undiscovered)Quick-dressing, maintenance.
Active connectionLive interface + Sphere SealMedium (2.5~4 MPa)MediumMaintenance on frequent occasions
07

SELECTION GUIDE

Select Table

The selection forms are presented by application, grinding material, leak-proof grade, connection mode, and fraction 5 dimensions, to facilitate systematic selection by the engineering designer based on the medium profile (coal powder concentration, flow speed, differential pressure, corrosivity).

Table 7-1 Card-based sheet for the selection of sites for the application of thermal foliage resistant electrocution programme (11 rows)

Table 7-2 Card-based table of thermal-retarded and leak-resistant electromechanicals for grinding material (6 rows)

Table 7-3 Card-based leak-resistant sheet (5 rows)

Ferrule-TypeWear-ResistantLeak-ProofThermocoupleFerrule-TypeWear-ResistantLeak-ProofThermocouple

Selecting table . Application situations / temperature rangesCross-reference
ApplyTemperature rangeIt's a good thing I'm not a good guy.Recommended leakageRecommended fraction number
Coal mill exit+50~+200 ℃Weld + Sprayrd floor / th floorType K
Coal powder pipe+50~+150 ℃Weld + SprayThird floor.Type K
Powder Separator+80~+180 ℃Weld + CombinationThird floor.Type K
Powder Separator+80~+180 ℃Weld + CombinationThird floor.Type K
Gasification stoves+200~+800 ℃Embedded + CompositeFour floors / All sealedK/ N type
Water and coal piping+50~+300 ℃Weld + EmbeddedFour floors.Type K
Cyclone separators+50~+400 ℃Weld + SprayDouble / Third LayerType K
A furnace with coal.+50~+200 ℃Weld + EmbeddedThird floor.Type K
Circulation fluid beds+100~+600 ℃Weld + SprayDouble / Third LayerType K
Biomass boiler+50~+300 ℃Weld + EmbeddedDouble / Third LayerType K
Waste generation+50~+200 ℃CombinationDoubleType K
Table of choice · Grain-resistant materials / processCross-reference
He's got a hard-on.ProcessHardnessLife expectancyPrice
Stellite 6 WeldingArc weldingHRC 556-12 monthsMedium (baseline)
ND Steel WeldingArc weldingHRC 5812-18 monthsMedium
Aluminium oxide spraySupersonic sprayHV 11006-12 monthsMedium
Chromium oxide sprayPlasma sprayHV 120012-18 monthsMedium
CombinationHigh chrome cast iron pouring.HRC 62+18 ~ +36 monthsHigh
YG6X EmbeddedHard-end alloy mosaicHRA 88+24 +36 monthsHigh
Selective table · Leak-proofing level / Pressure resistanceCross-reference
Leaking LevelPressure resistanceStructureTypical applicationsPrice
Single-level leakage1 MPaCardette onlyLow pressure coal powder, ash.Low (baseline)
Double-delaying.2.5 MPaCartridge + O CircleCoal mill exit, medium pressureMedium
Three-level leakage.4 MPaCarp + Circle + Entanglement TilesHigh pressure coal powder, CFBMedium
Selective table · Leak-proofing level / Pressure resistanceCross-reference
Leaking LevelPressure resistanceStructureTypical applicationsPrice
Four layers of leakage.6.4 MPard Layer + Second TightSuper-high pressure, gas-combing furnace.High
All sealed.10 MPaFour Layers + Weld + Online MonitorGasification, high pressure gas stabilizationHigh
ConnectionCounterpressureInstallation difficultyTypical applicationsRepresentative Model
Cassette Connection1~6.4 MPaMediumFireworks Coal Powder PipelineWRN-K Φ22
Flanged connection6.4~10 MPaMediumMedium-high pressure pipe, containerWRN-K DN25
Threaded connection≤ 1 MPaLowLow pressure pipe, equipmentWRN-K M27
Weld Connection6.4~25 MPaHighPermanent installationWRN-K Welding
Load the connection.≤ 1.6 MPaVery lowMaintenance on frequent occasionsWRN-K Carcass
Sensor typeTemperature rangeThermal power.CharacteristicsTypical applications
Type K200~+1260 ℃4.096 mV / 100 ℃Mainstream / high value for moneyFireworks, cement
Type N200~+1260 ℃3.962 mV / 100 ℃High temperature stable / anti-dissipulationNuclear power, supercritical.
Type E200~+840 ℃6.319 mV / 100 ℃Thermal power is high / low temperatureAt a low temperature and wear.
Type J210~+760 ℃5.269 mV / 100 ℃Old Device / Revert the atmosphereOld power plant renovation
Type T270~+400 ℃4.279 mV / 100 ℃Temperature high accuracyLow temperature coal powder, low speed current
08

SELECTION GUIDE

Selection Guide

8.1 10 Step-style process

Ferrule-TypeWear-ResistantLeak-ProofThermocouple

8.3 Card-based grinding resistance to leaking thermoelectric dolls 10 Line selection decision tree

The Ferule-TypeWear-ResistantLeak-ProofThermocouple summary covers all key technical points of the card-set for the resistance to leaking thermoelectric dolls from the principle to the application of the project, and the specifics should be demonstrated in detail with the latest product manual for the manufacturer and the field work situation.

Selection Guide · Steps / SelectionCross-reference
StepsSelect contentKey decision-making points
1Confirm media and temperature rangesCoal powder, fly ash, ash dross / 0 ~ +800 ℃
2Measuring coal powder concentrations and current speed+0.5~+5 kg/m³ / +5~+30 m/s
3Set the pressure differential and resistance levels+0.1~+10 MPa
4Select the grinding materialWelding/ Spraying / Complexity / Embedding
5Select the leakage levelSingle / Double / Third / Fourth / Full Seal
6Select the fraction numberK / N / E / J / T
7Determine Insert Depth50~500 mm (typical 100~200)
8Select ConnectionCarat / Frank / screw / Weld
9Verify blast/ protectionEx d IIB / Ex ia / IP65
10Estimated lifetime and spare partsCoal powder 1 ~ 3 years / fly ash 3 ~ 6 months
ComparativeCarpentry resistance.Normal grinding thermoelectric dolls
SealCartage + Multi-FadeSniff + Frank
Pressure resistance1~10 MPa≤ 1 MPa
Leakage rate10⁸ Pa·m³/s10⁴ Pa·m³/s
- It's a grinding head.Composite (stack + spray + mollification)Welding or single-layer spray
Life expectancy+1 + 3 years3-6 months
Price3000-15000 yuan800-3,000 CNY.
Typical applicationsCoal mills, coal powder pipesFung, fly ash, ash.
Online replacement(card structure)Hard (welding or screwdriver)
Cold junction compensationInternal semiconductor compensationInternal or external
Explosion protection markingEx d / Ex iaNormal or Exd
Typical lifetime+1 + 3 years3-6 months
Selective Guide Problem / Yes Decision-makingCross-reference
ProblemYes, it's a decision.No. Decision-making
Q1 medium is coal powder / fly ash?Card-selector to resist leakageCan Player Metal / Normal Grid
Q2 Media differential > 1 MPa?Select rd / th Level BlockSelect a single layer / double layer block
Q3 current speed > 25 m/s?Select stack welds + embedding millsSelect a stack of welding or spraying
Q4 Media contains strong corrosive?HS / titanium protection tubeChoose 316L.
Q5 temperature accuracy requirement ±0.4%?Select K/ N type IK Type II Level is enough
Q6 Coalifier / High Pressure Gasification?Select Full Seal + EmbeddedSelect three layers of leakage + welding
Q7 Need remote replacement?Select the fast-load / live connectCard / Frank
Q8 Working temperature > +600 °C?Select type N (anti-temperature drift)Choose K
Q9 Medium sulphur / self-combustion risk?Select Full Seal + Ex dSelect Normal + Layers
Q10 Limited budget / Short cycle?I'm just a little bit of a grinder.Card-select scheme
Selection guide · Serial number / AttentionCross-reference
Serial numberAttentionDetailed description
1Install Location SelectionPriority is given to the 5D behind the 2D before the pipe bend, avoiding the vortex and the dead zone.
2Insert Depth AssuranceEnsure that the temperature measurement end is located at 1 / 3 in the centre of the pipe, with a minimum insertion depth ≥ 100 mm
3Media FlowThe end of the protective tube should reverse the medium flow to the insertion and avoid a direct flushing.
4Carpenter twist controlCarpenter sprains followed by manufacturer code (typically 50 ~ 120 N.m.), perfluorinated, overtly damaged screws
5Protect the tube material match.316L does not apply to hydrochloric acid, hydroxysulfate; HSD C-276 does not apply to nitrite
6Frank connection is in progress.Make sure the sealing pads are in the middle when Frank connects. The bolts are all flat and firm.
7Compensatory guidance shieldKX / NX shield single point site (control chamber side) to avoid double-end back-to-back
8Cold-end temperatureThe temperature of the connector box should be ≤ 70 ℃, exceeding the required heat shield or water cooler
9Tilt installationWhen tilted, the dashboard should be directed towards the patrol channel, which will allow for reading on site
10Vibration protectionRubber-depressive pads or a zero-turn installation should be added to the vibration site
11Mine-protected and groundedSPD, ground-to-ground electrical resistance ≤ 4 times
12Online change of attentionReplace pre-separated media and vent to normal pressure, avoiding medium injection
Selection guide · Serial number / Maintenance itemCross-reference
Serial numberMaintenance projectsCycleContentsExecutor
1Appearance CheckMonthlySwitchboxes, card sets, seals, corrosiveField inspector.
2Carpenter rectificationEvery 6 monthsCheck the card nut twists and re-enhanced if necessaryMeter maintenance
Selection guide · Serial number / Maintenance itemCross-reference
Serial numberMaintenance projectsCycleContentsExecutor
3- Hearing head wear test.Every 12 monthsReplacing ≤ 1 mm when measuring remaining grinding head thicknessInstrument Engineer
4Air-container testingEvery 12 months30 minutes, no leaks.Instrument Engineer
5Overall calibrationEvery 12-24 monthsStandard thermal power ratio, return to the plant if necessaryVendor or third party
6Overall replacementEvery 1 ~ 3 yearsWhole replacement when the grinding layer is depleted or sealed outField maintenance officer