Carpentry resistance to leaking thermoelectric dollsClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

TEMPSEN-RT-350

Carpentry resistance to leaking thermoelectric dolls

Carpentry resistant to leaking thermoelectric dolls, card-resistant to leaking.

01

Classification: card-set resistant to leaking thermoelectric dolls

02

Check configuration based on field work

⁇ Return card-set resistant to leaking thermoelectric dolls

TECHNICAL SPECIFICATIONS

Technical specifications

TEMPSEN-RT-350

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelTEMPSEN-RT-350
Measurement principleThermal power effects: two different metal conductors form circuits, heat and cold temperature differentials generate thermal electrical motion, and the temperature is converted by instrument
Sensor typeK (Nichromium - Nickel Silicon, standard) N (Nichromic Silicon - Nickel Silicon) / E (Optional)
Measurement rangeK 0–1200℃ / N 0–1200℃ / E 0–800℃
Accuracy classI Level ±1.5℃ or ±0.4% | t | / II Level ±2.5℃ or ±0.75% | t zirconium (extracts high value)
ConstructionAdjustable compression fitting CC + grinding protection tube + Mineral-insulated coch (replaceable): Clip Protection tube Insertion depth scene Adjustable lock tight
Leak-resistant construction+ metal cone double seal, system is pressurized or Negative pressure under condition; sealed components are temperature resistant to condition Optional
Wear-resistant constructionProtection tube front end with a thick grinding head (ball/pane) with a spray of tungsten carbide (WC) / whole burn of silicon carbide / high chromium cast iron / Stellite welding
Wear resistanceHardness of the grinding layer HV1100–1300 Get used to the flue flow. ≥25m/s # And the ash # # of the sky # # with a normal life # 1Cr18Ni9Ti Pipe 3–5 Multiply
Compression fittingStainless steel double card set (GB/T 3765) or welded card set, fit φ12 / φ16 / φ20 Protection tube
Protection tube dimensionsφ12 / φ16 / φ20 / φ25 × L (insertion depth 200–2000mm optional); inserts a band of 304/316L
Process connectionCompression fitting (standard with welding/take-over seat); optional flange DN25–DN50 (with plug-head valves)
Junction boxWaterproof cast iron /Aluminium Alloy junction box IP65 optional 316L stainless steel box flameproof Ex d II C T6
Cold junction compensationJunction box Inline Pt100 Cold junction compensation (when integrated Transmitter)
Thermal response timeAnd 0.5 ≤20s (φ16 grinding tube, medium flow speed ≥5m/s)
Insulation resistance≥100MΩ (500VDC, constant temperature)
Vibration resistance10–500Hz, amplitude 0.35mm, match GB/T 2423
Operating pressureConstant pressure –2.5MPa; leak-resistant construction withstand system pressure positive/ negative pressure ±0.1MPa sealed
Ambient temperature-40–+80℃ (junction box); high-temperature type junction box to +150℃
Output signalThermoelectric EMF mV signal / integration 4–20mA + HART transformation (Optional)
Explosion protection markingEx d II C T6 Gb flameproof (optional) / Ex ia II C T4 Ga Intrinsically safe (Optional)
Applicable standardsIEC 60584 / GB/T 3765 (carat) / GB/T 30429 / JB/T 9238
Suitable operating conditionsCirculation fluidized boilers and separators, coal powder pipes, cement kiln tails, drying and fluidized bed dryers, and the import/export of dust cleaners Negative pressure High-speed erosion wear and tear
Product featuresCarbs slide deep + lock-in to avoid on-site cutting; leaking double seal adaptation Negative pressure system (e.g. before wind) air-infiltration, positive-pressure system anti-fouling; grinding head can be replaced separately, even cores will not be pumped out of the moor

Product selection

TEMPSEN-RT-350
Sensor type
CodeSensor type
K1Type K (general, ≤1200℃)
K2N (anti-temperature oxidation, ≤1200℃)
K3E (sensitized, ≤800℃)
Measurement range
CodeMeasurement range
L10~600℃
L20~900℃
L30–1200℃ (Standard)
Accuracy class
CodeAccuracy class
E1Level I
E2II Class (Standard)
Wear-resistant tip type
CodeWear-resistant tip type
W1310S/316L + Tungsten carbide spray (general grinding)
W2The whole carbide silica SiC (strength punching)
W3High chromium Cast iron (coarse granular wear)
W4Stellite alloy welding.
Compression fitting / connection dimensions
CodeCompression fitting / connection dimensions
C1φ12 double card set (GB/T 3765)
C2φ16 double card set (Standard)
C3φ20 double card set
C4Weld card suite (heavy)
C5DN25–DN50 flange + Cross Valve
Insertion depth L
CodeInsertion depth L
D1200 / 300mm
D2500mm
D3750 / 1000mm
D41500 / 2000mm (Specify when ordering)
Seal temperature rating
CodeSeal temperature rating
S1FKM sealed (≤200℃)
S2Silicon FKM Sealed (≤250℃)
S3Graphite/metal seal (≤450℃)
Junction box / output
CodeJunction box / output
X1Waterproof boxes IP65 + thermoelectric EMF mV
X2Waterproof boxes IP65 + integrated 4–20mA
X3Flameproof Ex d II C T6 + 4–20mA
X4High-temperature type box (environment ≤150℃)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
TEMPSEN-RT-350 Compression-Fitting Wear-Resistant Leak-Proof Thermocouple