PRODUCT TECHNOLOGY

Smart Pressure Transmitter

Operating principle

Smart pressure transmitters.

= Sensor element (mechanical and electrical conversion)+ microprocessor (digital compensation and communication), whose "smart" is reflected in three main capabilities: digital compensation, remote grouping, self-diagnosing. Digital compensation: the internal temperature and static sensors, which are digitized for temperature drift, static pressure error, non-linear desktops, are the underlying causes of their accuracy beyond the mechanical table; Remote grouping: Remote modification of the deliveryer ' s Quantities, Units, Interdiction, Fault Modes through HART hand-manufacturing (e.g. 475) or AMS/PRM Device Management Software; Self-diagnosis: A re-entry integrity diagnosis, barbed wire congestion detection, film monitoring, can provide early warning before impacting process.

  1. 01

    Process pressure passed through high-low pressure side separators + filling fluid (silicate/inert oil) to central measurement film;

  2. 02

    Measurement film is a rigid elastic element with a maximum shift of 0.1 mm (0.004 inches) and a positive shift to the pressure differential;

  3. 03

    (b) Measurement of the difference in the capacitation of the film with the fixed electrocide plate on both sides, resulting in a change in the margin of the capacitation;

  4. 04

    Electronic circuits to detect capacitor changes, amplified, A/D conversion to microprocessors;

Smart Pressure Transmitrator Selection Support

Provide survey missions, media and installation conditions and obtain product configuration advice.

Contact us
Smart pressure transmitter . Technical description

TECHNOLOGY & APPLICATION

Understand the principles, the exact selection.

From measurement principles to field applications, understand the technical characteristics and selection elements of smart pressure transmitters.

01

MEASUREMENT PRINCIPLE

Measurement principle

= Sensor element (mechanical and electrical conversion)+ microprocessor (digital compensation and communication), whose "smart" is reflected in three main capabilities: digital compensation, remote grouping, self-diagnosing.

1.1 Measuring links (in metal-capacitation 3051)

  1. 01

    Process pressure passed through high-low pressure side separators + filling fluid (silicate/inert oil) to central measurement film;

  2. 02

    Measurement film is a rigid elastic element with a maximum shift of 0.1 mm (0.004 inches) and a positive shift to the pressure differential;

  3. 03

    (b) Measurement of the difference in the capacitation of the film with the fixed electrocide plate on both sides, resulting in a change in the margin of the capacitation;

  4. 04

    Electronic circuits to detect capacitor changes, amplified, A/D conversion to microprocessors;

  5. 05

    Microprocessors, after linearization, temperature compensation, static pressure correction, output 4~20mA + HART digital signals.

  6. 06

    (a) Low pressure chamber through atmosphere ⁇ meter pressure (GP);

  7. 07

    (b) Vacuum and sealing in low pressure rooms (AP);

  8. 08

    High pressure rooms take two separate points of pressure ⁇ differential pressure (DP) and measure flow with current-saving devices, and the fluid-level with pressure-based methods.

1.2 Four main mainstream sensor technology routes

1.3 Core competencies for "smart"

Number compensation

(b) The internal temperature and static sensors, which are digitized for temperature drift, static pressure error, and non-linear desktops, which are the underlying causes of their accuracy beyond the mechanical table;

Remote Grouping

Remote modification of the deliveryer ' s mass range, unit, blockage, failure pattern through HART hand-manufacturing (e.g. 475) or AMS/PMM equipment management software;

Self-diagnosis

The back-way integrity diagnosis, barbed-in testing, film monitoring can provide early warning before impacting the process.

- Technical route / principleCross-reference
Technical routeRationaleRepresenting productsCharacteristics
Metal CapacitorThe film tablet shift is changing the differential electric capacity.Rosmont, 3051.Accuracy 0.075%, scale ratio 100:1 ~150:1, maturity steady, maximum global load
Single-crystal silvionicThe frequency inherent in the silica is changing with pressure.Trans-river EJALong-term stability is excellent ( ±0.1% / 10 Years, over pressure, frequency signals against interference.
Single-crystal silicon pressure resistanceThe diffusion of the silicone film is resistant to electrical resistance, pressure resistance, effect.Mainstream of national production (Kawayi PDF, ICMC, etc.)Accuracy 0.075 ~ 0.1%, high value, fast response
Silony/Blue Gems SpillSapphires are resistant to electrical resistance, and they are resistant to heat.Special High TemperatureMedia temperature above 200°C
02

PRODUCT STRUCTURE

Structure

2.1 General structure (two-part format)

Process side (sensor module)+ Electrical side (electronic shell), modular design, and strong switching of parts.

2.2 Sensors Module

Measurement Body

(a) High-pressure condensers (Coplanar plane co-combrane structure with 3051 characteristics, which can be fitted directly with trivalves/quintal groups);

Isolation diaphragm

316 L (coding), Haq alloy C276, Monnar, tantalum, gold-plated Monar (hydrogen, etc.);

Fill fluid

Silicon oil (standard), inert oil (in the case of oxygen, no oil), high temperature silicon oil (in the case of French mediums 15 ~ 315 °C);

O Circle

Fluorine rubber / butylonitrile rubber;

Process connection

1/4 NPT (centre distance 54mm), interface 1/2 NPT or M20x1.5; long-distance French, input, etc.

2.3 Electronic modules

Microprocessor circuit board + A/D conversion;

Output

4~20mA two-line (simulation + HART superheavy); Field bus type optional FF (Foundator Fieldbus), PROFIBUS PA, EtherNet IP WirelessART);

Show Header

Smart liquid tablehead, graphic backlight screen, key-click to modify the scale, display units, multilingualism; in situ/tele-tele-zero fullness adjustment (outside zero nail/zero button);

Electrical connection

M20x1.5 Cable entrance, 1/2 NPT;

Shell

Low copper aluminium alloy (spray) or stainless steel, protected by IP66/IP68;

Mine-awareness/wave protection

Optionally.

2.4 Transvestite type spectrometry (in 3051 cases)

Model

Type Use

3051CD

Flow detection, pressure-based fluid level with current-saving devices

3051CG

Pips/container pressure

3051CA

Pressure-repressed, vacuum system, atmospheric pressure compensation.

3051L

Liquefied (Franco-Darly) Physic/Hycolate-Mediated Liquefied

3051S

High performance (advanced diagnostic) Key circuits, SIS security instrument systems

EJA-E(EJA110/120/130/430/510…)

River-specific series IRR/Strength/Strench/Strench/Frand Liquefied/Health

03

TECHNICAL GUIDE

Advantages and disadvantages

3.1 Advantages (10 items)

Precision

Reference Precision ±0.075% (top model) ±0.04% ~0.055% ) is a mechanical pressure sheet ( 1.6 ~ 2.5 Level 20 More than twice as many;

The scale is huge.

100: 1 (3051) to 150: 1 (3051 S/EJA-E), a instrument covering a wide range and significantly reducing the specifications of spare parts;

Quantities/zero points remotely adjustable + high migration capacity

Moving 500%, negative migration 600%, which can be adapted without splitting the table;

Long-term stability is excellent.

0.25% / 5 Year (e.g., capacitor) to ±0.1% / 10 Year (EJA single-crystal) with a test period extending to 3 ~ 6 (a) Years;

Total digital compensation

Temperature, static pressure, non-linear table-by-stage correction, with actual work still being high in accuracy;

Signals are passed far + two-way communication

4~20mA superimpose HART to support hand-manoeuvring/AMS remote grouping, diagnosis, back-tracking tests;

Self-diagnosis

(b) Backway diagnostics, barbed-pipe congestion detection, film monitoring, and reduction of unplanned downtime;

Medium and environmental adaptation

(a) Separating film + corrosive and high-pressure resistance (conventional 14MPa, high-pressure 32MPa or more) to fill liquids, with multiple-phases of fluid content;

Security capabilities are strong.

BEN iIC T6/Explosion d IIC T6 Double authentication option, SIL2/SIL3 authentication model for security instrument systems;

No active parts, no frequent maintenance

The whole machine is solidified and is routinely subject to sealing and clean-up of the barometers.

3.2 Limitations (10 items)

High prices

Importing a 20-50 times more intelligent than a normal pressure table and a 10-20 times more intelligent than a national product;

We need power and signal circuits.

24VDC, associated with circuits, cables, safety fences, etc., with total cost of work higher than the tabular calculation itself;

Precision depends on the range of the scale compared to the use range

Declines the precision of the scale-scaled bera (if greater than 10: 1 is reduced from 0.075% to 0.1 ~ 0.2%) and is not available at random;

Weaknesses inherent in filling fluids and quarantine film

(b) Gasification of liquids in high temperature vacuums, infiltration of hydrogen gas (with gold film required), erosion of film tectonics, or their extinction;

The barbed wire still needs to be maintained.

Condensation, congestion, leakage are common sources of malfunctions for the differential type transporters (although congestion diagnosis is available);

Thunder and flood risk

(b) The fact that Louis was damaged by lightning on the spot with a mine-protector and good landing;

Protocol Ecolock

HART/FF/PA protocol equipment management software is different and the old system upgrades have compatible costs;

We're gonna be weak.

(a) No direction for the surface-shaped site, with additional costs and reliance on battery/backway power;

The power of the micro-disk chamber to resist static pressure is limited.

(b) The differential pressure type static pressure error of up to ±10% (high-pressure ±2.0%) and the selection shall check the sequester effect;

Maintenance dependent on return/professional services

The sensor damage could not be repaired on site and the issue of the delivery of the imported items and the price was highlighted.

04

APPLICATIONS

Application area

4.1 Typical application scenarios

4.2 Division of labour with mechanical pressure sheets

(b) In situ surveillance, uncontrolled circuits, pressure meters (low cost, free of electricity);

Control circuits, metrology, remote monitoring, locking, smart pressure transmitters;

Engineering practices

Important point transducer + double configuration of the surface of local pressure, intercalibration.

Area

Typical uses

Petroleum chemicals

Discretion tower differential pressure, reaction blank pressure, piping flow (poreboard/V cone), tank fluid level (discretion/Francian bit)

Electricity

Main vapour/water pressure, carving vacuum (insulation type), flue-smoke system differential

Gas/oil gas

Long pipeline pressure, trade traffic measurement (multivariant transducer), wellhead pressure (moderate 32+)

Water treatment

Pump export pressure, filter pool differential (blocking judgement), exposure flow

Food medicine

CIP process pressure, cans of liquids for sanitary (calorized, 316L polished)

Metallurgy

High-heavy wind pressure, chamber differential pressure, hydraulic system

Security instrumentation system (SIS)

SIL2/3 Authentication for ultra-pressure locks, emergency parking

05

TECHNICAL SPECIFICATIONS

Technical Parameter Table

5.1 Overall technical parameters (based on mainstream intelligence)

5.3 Types of slotting table

Technical parameter table · Item / ParametersCross-reference
ItemParameters
Measured mediumLiquids, gases, vapours (compatible with the liquid material being relayed)
Measurement range0~200Pa to 41.3MPa (microvolt to high-pressure full series); national production universal 0~0.25kPa to 51MPa
Reference Precision±0.075% (Standard); Top ±0.04% ~0.055%; National Production Universal ±0.1 ~ 0.5%
Turndown ratio100:1(3051)~ 150:1(3051S/EJA-E)
Long-term stability0.25% / 5 year ~ ±0.1% / 10 year (singles)
Output signal4~20mA DC two-way + HART; optional FF/PROFIBUS PA/WIRELESSHART
Electricity voltage12~36VDC (this is a security fence-limited model)
Load capacity(power voltage-12V) / 0.02A times, 250 ~ 1100 in numerical mode
Start Time2s
Stop!0.25 ~ 1.67s continuous to be adjusted (silicate)
Ambient temperature20~85°C (extreme greater)
Process medium temperature40 ~ 100 °C (Franco remotely filled with high temperature silicon oil 15 ~ 315 °C)
Temperature effects±0.2% / 10 K (typical); overall better after digital compensation
The impact of static pressure≤±10%, ≤±0.5%, ≤±2.0%
Migration capacityMoving ≤500% Minimum Quantities; Negative Migration ≤600%
Bomb protection certificationBenan i IIC T6 / Detonation d IIC T6
Ingress protectionIP66/IP68
Wetted materialsFilms: 316 L/Ha, C276/Monal/Turn/Ginner, inherently 316 L/Ha, O Circle: Fluorine/Bullet
Install Connection1/4 NPT (centre distance 54mm), M20x1.5/1/2NPT; trivalves/quintrums; Faraway French
Applicable standardsGB/T 17614 (HART smart transporter), IEC 61508 (SIL functional security)
Review BasisJJG 882 (Pressure Transmitters Checker Protocol)
Scale versus Usage RangeReference Precision
≤10:1±0.075%
10:1~30:1±0.1%
30:1~100:1±0.2%
100:1~150:1±0.25%
Technical parameter table · Type / Range of the range (typical)Cross-reference
TypeRange (typical)Maximum static pressureMain uses
Micro differential pressure type0~0.1~6kPaConstant pressure ~2MPaBoiler pressure, wind pressure.
Flow/voltage type0~2.5 kPa to 0~14/21MPa14/32MPaFlows, fluids, differential pressure
Pressure type0~7kPa to 0~41.3MPa—Pressure monitoring
Insulation type0~8.6 kPa(a) to 0~27.6 MPa(a)—Vacuum, pressure-free.
High still pressure differential typeScalding small range32~42MPaHigh pressure pipe line flow
Franc liquid bitingBy the height of the liquid columnBy Frank.High sticky/condensable fluid level
Multivariate (MV)P +T—Vap/gas flow dynamic compensation
06

SELECTION GUIDE

Select Table

6.1 Required parameters for ordering

  1. 01

    Measurement type

    (i) Watch/ pressure/ differential/ fluid level/ flow;

  2. 02

    (a) The range of the scale (including normal, maximum, minimum work value) and the estimate of the scale;

  3. 03

    (a) The name of the detected medium, corrosivity, viscosity, crystallization/spectrum-containing;

  4. 04

    (b) Silent pressure (work pressure) - the differential pressure type is filled;

  5. 05

    Temperature of the medium, ambient temperature;

  6. 06

    Precision requirements and whether they are used for SIS (SIL level);

  7. 07

    Output protocol

    4~20mA+HART / FF / PA;

  8. 08

    Process connection

    (b) Hypothetical/French/carp hygiene, screw specifications;

  9. 09

    (b) Relay fluids and filling fluids (notation on prohibited oil occasions);

  10. 10

    (b) Explosive-resistant class and installation area;

  11. 11

    Whether to display the surface, mine-protector, trivalve/quinquies.

6.2 Sensor technical route selection

6.3 The rules for the selection of the scale and accuracy

The normal work value falls on 25% of the scale ~75%;

The scale is as high as 10

1 Within which the maximum accuracy slotting is guaranteed; accounting for the satisfaction of the downgrading accuracy when wide coverage is required;

Flow-of-the-pressure type

(b) Selection by approximately 1.5 times the maximum pressure of the throttle-saving device, taking into account the small flow resolution;

Migration applications (e.g., liquid column static pressure)

Calculates the positive/negative displacement amount, which does not exceed the limit of 500%/600%.

6.4. Table of selected liquids for relaying

6.5 Example of Model (Type 3051)

Technical IconClick to see the big picture
3051 C D 3 A 22 A 1 M5 B1D1 ...
│ │ │ │ │ └─ Options (display, electrical interface, safety barrier, etc.)
│ │ │ └── Output (A: 4–20 mA + HART / S: advanced)
│ └──────── Range code (select 2/3/4… by measuring range)
│ Explosion protection / fitting code
└──┬─────── C transmitter type (CD differential / CG gauge / CA absolute)
└────── Series (3051/3051S)

(The EJA-E series is numbered by EJA110A-ELS-LA-22NA type, logically similar: Basic specification - Relaying fluid - Membrane Box - Installation - Electrical Options.

6.6 Selective elements and use maintenance

  1. 01

    (a) First what to measure (P/AP/DP/lique level/flow) and then the sensor's route and quance;

  2. 02

    The still pressure must be checked.

    (b) The differential pressure static limit is the preferred high-activity point for the selected accident, and is preferred to the high-pressure slot;

  3. 03

    Negative/vacuum decomposition

    (b) Vacuum systems should select the pressure-insulation type (AP) and the accuracy of the pressure-based negative zone;

  4. 04

    Write in the contract on the oil ban.

    Oxygen, high purity, shall be specified for inert oil filling and defamining treatment;

  5. 05

    Triple valves for a combination of applications

    (b) The balancing valve is opened and the pressure valve is opened to prevent one-way shock film;

  6. 06

    Zero relocation site verification

    The site is used to provide back-track testing with a ART hand-man and fine-tuning of zero points.

  7. 07

    The baroque's blocking.

    Vapour pressure with condensers containing dust media for blowing/separation;

  8. 08

    Mine-protected areas are equipped with mine-protectors and signal cable shielding points are placed;

  9. 09

    Periodically measured as JJG 882, with smartness using the HART remote verification to reduce workload;

  10. 10

    Do not select uncertified products at low prices.

    The blast control, SIL certification and plant calibration reports are the threshold for entry to petrochemicals.

Selective table · Needs / RecommendationsCross-reference
RequirementsRecommendations
Integrated energy and ecological maturityMetal capacitor (Category 3051)
Long-term stability priority, long exemption periodSingle-crystal silvionic (EJA class)
Value for money, domesticizationSingle-crystal silicon-pressure resistance (PDS/Class)
High temperature mediumSapphire/Premote-transmitting tube high-temperature silic oil
Selective Table . Media / Recommended film/mechanical materialCross-reference
MediaRecommended film/synthetic material
Water, steam, general oil316L
Weak acid, chlorine-containing ion mediaHastelloy C276
Seawater, hydroflonic acid (fresh)Monnell.
Strong acids (hydrochloric acids, wet chlorine)Tantalum
Hydrogen gas, hydrogen infiltration riskGold-plated Monnell.
Oxygen, no oil.Inert oil filling + clean treatment
07

TECHNICAL GUIDE

Horizontal comparison table

7.1 Smart pressure transmitter vs proximity meters

7.2 Selective mouthpieces

Controls the selection of transformations, precise measurement ranges, fine; Vacuum selection insulation, with high pressure checked; Corrosion of Hades, hydrogen plating; Prohibition of inert oil, steam and condensation; Remote transfer of hand-held devices, back-to-road diagnostics operation; In-situ monitoring of pressure sheets, double-surface nuclei.

This summary technical parameters are based on public samples from the GB/T 17614, JJG 882 and the Rosemont 3051/EJA series, which are based on the latest samples from the manufacturer.

Horizontal comparison · Contrast / Smart Pressure Transmitters (3051/EJA)Cross-reference
ComparativeSmart pressure transmitter (3051/EJA)Mechanical pressure tableElectron point pressure tableDigital pressure sheet
RationaleCapable/single-silviol+microprocessorThe spring tube is mechanically amplified.Spring tube + touchpointPressure transfer plus magnitude
Precision±0.075~0.2%1.6~2.5 LevelDirection 1.6 Level / Controls Crude0.5~1.0 Level
Output4~20mA+HART/FFNoneSwitch QuantitiesIn situ count (partly 4-20mA)
Remotely transmitted groupingSupport (handcraft/AMS)Not supportedNot supportedNot supported
Self-diagnosisZhang (back roads/blocks/films)NoneNoneLow
Long-term stability0.1%/10 ~0.25%/5 yearsSubject to 1 yearSubject to 1 yearGeneral
Electricity24VDC Two-line SystemNo need.No need.Battery/output
PriceHigh (20 ~ 50 times Table)MinimumLowLow ~ Medium
Typical usesControl circuits, metering, chainsLocal surveillanceSimple start controlAccurate reading on site