Smart Pressure TransmitterClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PRETRAN-PR-100
Smart Pressure Transmitter
Smart Pressure Transmitter, HART protocol smart pressure sender
01
Classification: Smart pressure transmitter
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PRETRAN-PR-100 |
|---|---|
| Measurement principle | Monocrystalline silicon piezoresistive / Capable Sensor + Digital signal processing (smart) |
| Measurement type | Gauge pressure (G) / absolute pressure (A) / Vacuum (complex) |
| Measurement range | 0–100Pa to 0–60MPa (turndown ratio 100:1 Adjustable) |
| Accuracy class | ±0.075% / ±0.1% / ±0.2% (Optional) |
| Output signal | 4–20mA (DC) + HART protocol/ RS485 (MODBUS)/ 0–10V Optional |
| Power supply | 12–36VDC (standard 24VDC) |
| Load capacity | (Supply voltage − 12 V) / 0.02 A, up to 1.2 kΩ |
| Sensor capsule | 316L (standard), Hastelloy C276, tantalum (Optional) |
| Process connection | M20×1.5 / G1/2 / 1/2NPT / Flange (single flat/single plug) |
| Display type | 4 bit LCD local Display (percentage/project volume) rotates the watch header |
| Damping time | 0–32s Configurable |
| Stability | ±0.1% /year (10 annual calibration cycle Optional) |
| Process medium temperature | -40–+120℃ (high-temperature type to +350℃ with barbed tube/distant Diaphragm capsule) |
| Ambient temperature | -40~+85℃ |
| Ingress and explosion protection | IP66/IP67; Ex d II C T6 Gb / Ex ia II C T4 Ga (Optional) |
| Communication and diagnostics | HART Handheld/Debug software Configuration; self-diagnosis Range Alarm |
| Electrical connection | 2×M20×1.5 / 1/2NPT-F (Cable interface) |
| Applicable standards | GB/T 17614 / IEC 61010 / HART 7 |
| Suitable media | Liquid, gas, vapour pressure/ absolute pressure / vacuum measurements (compatible 316L) |
Product selection
PRETRAN-PR-100| Code | Measurement type |
|---|---|
| T1 | Gauge pressure (G) |
| T2 | Absolute pressure (A) |
| T3 | Vacuum /complex(-100kPa–0–x) |
| Code | Range options (MPa) |
|---|---|
| R1 | 0–100Pa–0–6kPa (micropressure) |
| R2 | 0~6kPa~0~60kPa |
| R3 | 0~60kPa~0~600kPa |
| R4 | 0~0.6MPa~0~6MPa |
| R5 | 0~6MPa~0~60MPa |
| Code | Accuracy class |
|---|---|
| E1 | ±0.2% |
| E2 | ±0.1% |
| E3 | ±0.075% |
| Code | Output signal |
|---|---|
| O1 | 4~20mA + HART |
| O2 | 4~20mA + RS485(MODBUS-RTU) |
| O3 | 0~10V |
| Code | Sensor capsule materials |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Tantalum Ta (strong corrosive) |
| Code | Process connection |
|---|---|
| J1 | M20×1.5 Male thread |
| J2 | G1/2 / 1/2NPT |
| J3 | Single Flange (tele-sealed) |
| J4 | Single plug Flange (high temperature/slurry) |
| Code | Display and adjustment |
|---|---|
| L1 | No display (Standard header) |
| L2 | 4 LCD Display |
| L3 | LCD + local magnetic pen school |
| Code | Explosion protection marking |
|---|---|
| X1 | Non-Ex (Intrinsically safe / Flameproof Optional) |
| X2 | Flameproof Ex d II C T6 Gb |
| X3 | Intrinsically safe Ex ia II C T4 Ga |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us