PipeClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-TM-200
Thermal gas mass flow meter
Thermal gas mass flow meters, tube-band configuration. Thermal diffusion principles, gas mass flow measurement directly
01
Classification: Thermal gas mass flow meter
02
Structure form: piped
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-TM-200 |
|---|---|
| Nominal pipe size | DN15~DN300 |
| Measurement principle | Thermal diffusion (heat differentials, Measuring tube, with double platinum electrical resistance probes to directly measure gas mass flow) |
| Measured medium | Gases such as air, nitrogen gas, gas, gas, flue gas, hydrogen gas (including small amounts of dust) |
| Accuracy class | ±1.0% (optional ±1.5%) |
| Repeatability | ±0.5% |
| Turndown ratio | 100:1 |
| Flow velocity range | 1–60 Nm/s (Performance) |
| Process medium temperature | -20~+350℃ |
| Ambient temperature | -25~+55℃ |
| Operating pressure | 1.0MPa、1.6MPa、2.5MPa、4.0MPa、6.3MPa |
| Sensor material | 304 stainless steel / 316L Stainless steel (Measuring tube compost with probe) |
| Construction | Integrated Measuring tube, no visible inside of the probe, no direct plug-in parts, no field openings |
| Mounting | The whole string is attached to the conduit and supports horizontal/vertical installation (the medium is a bottom-up medium when vertical) |
| Straight pipe length requirements | 5D, 3D |
| Connection | Flanged connection, Threaded connection, Clamp connection |
| Display type | LCD Local display immediate/ Totalized flow (Optional No display) |
| Output signal | (4–20) mA, HART, RS485 (Modbus), Pulse |
| Power supply | 24V DC、220V AC |
| Explosion protection marking | Ex ia IIC T4 (intrinsically safe), Ex d IIC T6 (Flameproof) |
| Ingress protection | IP65 (optional IP67) |
| Electrical connection | M20×1.5 |
| Pressure loss | Neglectable (uncontrolled fluids without loss of additional pressure) |
| Flow units | Nm³/h, m³/h, kg/h, t/h (toggle) |
Product selection
FLUME-TM-200| Code | Nominal size (mm) | Measurement range (Nm³/h) |
|---|---|---|
| 15 | DN15 | 1~38 |
| 20 | DN20 | 1~68 |
| 25 | DN25 | 2~106 |
| 32 | DN32 | 3~174 |
| 40 | DN40 | 5~271 |
| 50 | DN50 | 7~424 |
| 65 | DN65 | 12~717 |
| 80 | DN80 | 18~1086 |
| 100 | DN100 | 28~1696 |
| 125 | DN125 | 44~2651 |
| 150 | DN150 | 64~3817 |
| 200 | DN200 | 113~6786 |
| 250 | DN250 | 177~10603 |
| 300 | DN300 | 254~15268 |
| Code | Pressure rating |
|---|---|
| P1 | 1.0 MPa |
| P2 | 1.6 MPa |
| P3 | 2.5 MPa |
| P4 | 4.0 MPa |
| P5 | 6.3 MPa |
| Code | Sensor material |
|---|---|
| B1 | 304 Stainless steel |
| B2 | 316L Stainless steel |
| Code | Construction |
|---|---|
| K1 | Standard Inline |
| K2 | Inline |
| Code | Accuracy class |
|---|---|
| E1 | ±1.0% |
| E2 | ±1.5% |
| Code | Process medium temperature |
|---|---|
| T1 | -20~120℃ |
| T2 | ≤200℃ |
| T3 | ≤350℃ |
| Code | Connection |
|---|---|
| C1 | Flanged connection |
| C2 | Threaded connection |
| C3 | Clamp connection |
| Code | Display type |
|---|---|
| G1 | No display |
| G2 | LCD Local display |
| Code | Power supply |
|---|---|
| D1 | 24V DC |
| D2 | 220V AC |
| Code | Signal output |
|---|---|
| F1 | (4~20)mA |
| F2 | (4~20)mA + HART |
| F3 | RS485(Modbus) |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T4 (Intrinsically safe) |
| U2 | Ex d IIC T6 (Flameproof) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us
