Stainless steel-resistant diaphragm-resistant pressure tableClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-ED-100
Stainless steel-resistant diaphragm-resistant pressure table
Stainless steel is resistant to seismic membrane point pressure table, seismic membrane point pressure table
01
Classification: stainless steel, seismic diaphragm pressure table
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-ED-100 |
|---|---|
| Measurement principle | Diaphragm seal + elastic (bourdon tube) mechanical measurement + recharging + Magnetic aid Electrical contact output |
| Case material | 304 / 316L stainless steel body stamped, full-filled shell IP65 |
| Dial diameter | Φ100、Φ150 |
| Connection | Thread (M20×1.5/G1/2/NPT) flange (DN25–DN100, PN1.0–4.0) |
| Diaphragm material | 316L, Hastelloy C276, tantalum (Optional) |
| Diaphragm seal body material | 316L Stainless steel |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Measurement range | 0–0.1MPa to 0–25MPa (include Vacuum) |
| Accuracy class | 1.6 Level (Diaphragm-containing system) |
| Contact arrangement | Magnetic electrical contact, high and low limits set the pointers to each 1 |
| Setpoint range | Measurement range 5%–95% High and low limits can be set independently |
| Contact rating | AC 220V / 1A (dehibition), AC 380V / 0.5A |
| Switching method | Normally open (NO) / normally closed (NC) / Closed once (SPDT) |
| Output Method | Voltage-free dry contact switch signal (direct access to intermediate relays/contacts) |
| Process medium temperature | -20–+100℃ (silicone oil recharging, high-temperature type to +200℃ requiring bulk heat) |
| Operating pressure | Static load: ≤ upper range limit 2/3; dynamic load (pulsation): ≤ upper range limit 1/2 |
| Vibration resistance | Recharge blocker, resistant to 25m/s2 peak acceleration vibration |
| Seal fill fluid | Silicone oil (standard) / low-temperature silicone oil / food-grade glycerin |
| Diaphragm seal system | Bourdon tube - diaphragm is completely closed, impregnated, crystal-resistant, corrosive, pulse-resistant |
| Applicable standards | GB/T 1226 / JB/T 8611 diaphragm pressure table/ JB/T 5518 shock resistant pressure table/ JJG 52 |
| Suitable media | Pressure control and locking Alarm of high viscosity, crystallity, strong corrosive, strong pulse condition |
| Ambient temperature | -20–+60℃ (fellow type) |
Product selection
PREST-ED-100| Code | Connection Form |
|---|---|
| J1 | Thread Direct formula (M20×1.5 down) |
| J2 | Thread Direct formula (G1/2 / 1/2NPT) |
| J3 | Flange (DN25–DN100, PN1.0–4.0) |
| Code | Diaphragm material |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Tantalum Ta (strong corrosive) |
| Code | Dial diameter |
|---|---|
| D1 | Φ100 |
| D2 | Φ150 |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 / 0~0.6 |
| R3 | 0~1.0 / 0~1.6 / 0~2.5 |
| R4 | 0~4 / 0~6 / 0~10 |
| R5 | 0~16 / 0~25 |
| R6 | -0.1–0 (vacuum) / -0.1–2.4 |
| Code | Contact arrangement |
|---|---|
| C1 | I normally open (NO) |
| C2 | I normally closed (NC) |
| C3 | SPDT) |
| C4 | Double ceiling + 1st limit (III Contact) |
| Code | Fill fluid (damping) |
|---|---|
| F1 | Standard silicone oil (-20–+100℃) |
| F2 | Low-temperature silicone oil (-40–+100℃) |
| F3 | Food class Glycerin (food/medicine) |
| Code | Heat-dissipation accessories |
|---|---|
| H1 | No dispersible heat |
| H2 | Bulk heat (media ≤200℃) |
| H3 | Cooled plate tubes (high temperature and corrosive) |
| Code | Case material |
|---|---|
| C1 | 304 Stainless steel |
| C2 | 316L Stainless steel (corrosive environment) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us