ControlClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

LISEN-LT-200

Liquid-level transducer.

LPG, conductor configuration. Input LTP

01

Classification: Liquefied Transmitter

02

Structure form: conductive

⁇ Return liquid-place transducer class

TECHNICAL SPECIFICATIONS

Technical specifications

LISEN-LT-200

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelLISEN-LT-200
Measurement principleConsole: pass Flange Thrust/ Isolation diaphragm Draw static pressure from the bottom of the container to the sensor element, convert Level Height
Measurement range0–1mH2O – 0–100mH2O (ordered range, turndown ratio 10:1)
Measurement accuracy±0.25%FS / ±0.5%FS (Optional)
Long-term stability±0.2%FS /year
Overload capacity1.5 Range
Process medium temperature-40–+150℃ (high-temperature type +200℃, with condensed/dispersive tubes)
Ambient temperature-30~+70℃
Operating pressurePN1.0 / PN1.6 / PN2.5 / PN4.0 (optional) with maximum containment container 4.0MPa)
Isolation diaphragm316L stainless steel (Haze C276 / tantalum / Mona Optional)
Wetted parts316L Stainless steel / Hastelloy
Process connectionDN25–DN80 flange (HG/T 20592) / G1½ Thread
Capillary / impulse lineStainless steel baroque 0.5–3m, or direct Flange flat film installation
Fill fluidSilicone oil (Standard) / High temperature Silicone oil / Food class Glycerin
Output signal4–20mA two-wire + HART (standard) / RS485 Optional
Power supply12–36VDC (standard 24VDC)
Display typeLCD Local display (backlight)
Ingress protectionIP66 / IP67
Explosion protection markingEx d II C T6 Gb / Ex ia II C T4 Ga (Optional)
Applicable standardsGB/T 28474 / JB/T 12597 / HART 7
Suitable mediaLevel measurements for high temperature liquids, viscous media, crystallized media, granules and closed-band presses

Product selection

LISEN-LT-200
Measurement type
CodeMeasurement type
T1Level (singing Flange side load)
T2Level + Interface (two Flange Differential pressure)
Measuring span (mH2O)
CodeMeasuring span (mH2O)
L10~1 / 0~5
L20~10 / 0~20
L30~50 / 0~100
Accuracy class
CodeAccuracy class
E1±0.5%FS
E2±0.25%FS (Standard)
Pressure rating
CodePressure rating
P1PN1.0
P2PN1.6 (Standard)
P3PN2.5
P4PN4.0
Flange specification
CodeFlange specification
F1DN25 / DN50
F2DN80
F3G1½ Thread (Thread)
Isolation diaphragm material
CodeIsolation diaphragm material
M1316L Stainless steel (Standard)
M2Hastelloy C276
M3Tantalum film
M4Monnar alloy.
Fill fluid
CodeFill fluid
G1Silicone oil (standard, -40–150℃)
G2High temperature silicone oil (-20–200℃)
G3Food class Glycerin
Output signal
CodeOutput signal
O14–20mA + HART (Standard)
O2RS485(MODBUS-RTU)
Explosion protection marking
CodeExplosion protection marking
X1Non-Ex
X2Flameproof Ex d II C T6 Gb
X3Intrinsically safe Ex ia II C T4 Ga

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
LISEN-LT-200 Flange Mounted Level Transmitter (Guide-Pressure Type)