Mass flowmeterClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-CM-100
Mass flowmeter
Quality flow meters, Cordell principles, high quality flow accuracy direct measurement
01
Classification: Quality flow count
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-CM-100 |
|---|---|
| Nominal pipe size | DN3~DN200 |
| Measurement principle | Corioli (Measuring tube HF vibration, positive ratio of export and import phase to mass flow) |
| Measured medium | Liquid, gaseous, plasma and solid phase (high viscosity, crystallity medium) |
| Accuracy class | ±0.2% (liquid), ±0.5% (gas) |
| Repeatability | ±0.1% |
| Turndown ratio | 100:1 |
| Process medium temperature | -50~+350℃ |
| Ambient temperature | -25~+55℃ |
| Operating pressure | 1.6MPa、2.5MPa、4.0MPa、6.3MPa |
| Measuring tube material | 304 stainless steel / 316L Stainless steel / Hastelloy |
| Measuring tube type | Double U shape vibrating tube / microbrush vibrating tube |
| Density measurement | 0.2–3.0 g/cm³, accuracy ±0.002 g/cm³ |
| Additional measurements | Process medium temperature, volume flow, density, concentration (multiparametric synchronized output) |
| Mounting | Installation in any direction (recommendation to avoid Measuring tube gas, fluid) |
| Straight pipe length requirements | No request (formerly 0D, later 0D) |
| Connection | Flanged connection, Threaded connection, Clamp connection |
| Display type | LCD Local display instant/accumulative mass flow, density, temperature |
| Output signal | (4–20) mA, HART, RS485 (Modbus), Pulse |
| Power supply | 24V DC、220V AC |
| Explosion protection marking | Ex ia IIC T4 (intrinsically safe), Ex d IIC T6 (Flameproof) |
| Ingress protection | IP65 (optional IP67) |
| Electrical connection | M20×1.5 |
| Pressure loss | Small (unsuspensed flow, Measuring tube straight) |
Product selection
FLUME-CM-100| Code | Nominal size (mm) | Measurement range (kg/h) |
|---|---|---|
| 3 | DN3 | 1~60 |
| 6 | DN6 | 3~180 |
| 10 | DN10 | 8~480 |
| 15 | DN15 | 20~1200 |
| 20 | DN20 | 40~2400 |
| 25 | DN25 | 60~3600 |
| 32 | DN32 | 100~6000 |
| 40 | DN40 | 160~9600 |
| 50 | DN50 | 250~15000 |
| 65 | DN65 | 420~25200 |
| 80 | DN80 | 640~38400 |
| 100 | DN100 | 1000~60000 |
| 150 | DN150 | 2250~135000 |
| 200 | DN200 | 4000~240000 |
| Code | Pressure rating |
|---|---|
| P1 | 1.6 MPa |
| P2 | 2.5 MPa |
| P3 | 4.0 MPa |
| P4 | 6.3 MPa |
| Code | Measuring tube material |
|---|---|
| B1 | 304 Stainless steel |
| B2 | 316L Stainless steel |
| B3 | Hastelloy |
| Code | Measuring tube type |
|---|---|
| K1 | Double U shape tube |
| K2 | Microcurve tube |
| Code | Accuracy class |
|---|---|
| E1 | ±0.2% (liquid) |
| E2 | ±0.5% (gas) |
| Code | Process medium temperature |
|---|---|
| T1 | -50~150℃ |
| T2 | ≤250℃ |
| T3 | ≤350℃ |
| Code | Connection |
|---|---|
| C1 | Flanged connection |
| C2 | Threaded connection |
| C3 | Clamp connection (sanitary type) |
| Code | Display type |
|---|---|
| G1 | No display |
| G2 | LCD Local display |
| Code | Power supply |
|---|---|
| D1 | 24V DC |
| D2 | 220V AC |
| Code | Signal output |
|---|---|
| F1 | (4~20)mA |
| F2 | (4~20)mA + HART |
| F3 | RS485(Modbus) |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T4 (Intrinsically safe) |
| U2 | Ex d IIC T6 (Flameproof) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us