Glass rotor flow meterClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-GR-100
Glass rotor flow meter
Glass rotor flow meters, glass pipe rotor structure, economic transparency instructions
01
Classification: glass rotor flow meters
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-GR-100 |
|---|---|
| Nominal pipe size | DN2~DN100 |
| Measurement principle | Area variant (convene glass tube + float, vertically installed, in situ indication) |
| Measured medium | Liquids, gases (water, acid solution, air, nitrogen, etc.) |
| Accuracy class | 2.5 (optional 1.5) |
| Turndown ratio | 10:1 |
| Process medium temperature | -20–+120℃ (normal temperature) ≤150℃ (High-temperature type) |
| Ambient temperature | -25~+55℃ |
| Operating pressure | DN2~DN15:≤0.6MPa DN25~DN100:≤0.4MPa |
| Tapered tube material | Silicon glass high (GG-17) |
| Float material | 316L stainless steel PTFE (PTFE), Aluminium, Manau |
| Seal material | NBR, FKM, PTFE |
| Connection | Thread G1/2–G2 flange GB/T 9119 wisting hoses |
| Display type | Float on-site instruction (Optional photo Pulse distant) |
| Output signal | Pulse, RS485 (Modbus) 4–20) mA (with Transmitter module) |
| Power supply | 24V DC, 3.6V lithium batteries |
| Ingress protection | IP65 |
| Explosion protection marking | Ex ia IIC T4 (Intrinsically safe with an apogee module) |
| Pressure loss | ≤2 kPa |
Product selection
FLUME-GR-100| Code | Nominal size (mm) | Measurement range (L/h) |
|---|---|---|
| 2 | DN2 | 0.4~4 |
| 3 | DN3 | 0.6~6 |
| 4 | DN4 | 1.0~10 |
| 6 | DN6 | 2.5~25 |
| 10 | DN10 | 6.0~60 |
| 15 | DN15 | 16~160 |
| 25 | DN25 | 100~1000 |
| 40 | DN40 | 250~2500 |
| 50 | DN50 | 400~4000 |
| 65 | DN65 | 1000~10000 |
| 80 | DN80 | 1600~16000 |
| 100 | DN100 | 2500~25000 |
| Code | Connection |
|---|---|
| C1 | Thread G1/2–G2 |
| C2 | Flange GB/T 9119 PN1.0 |
| C3 | Tube Quick Pickup (DN2–DN10) |
| Code | Mounting configuration |
|---|---|
| S1 | Vertical pipe installation (Standard) |
| S2 | With metal protection |
| S3 | Panel rack installation |
| Code | Float material |
|---|---|
| K1 | 316L Stainless steel |
| K2 | PTFE (PTFE) |
| K3 | Aluminium |
| K4 | Manau. |
| Code | Accuracy class |
|---|---|
| E1 | Level 2.5 |
| E2 | Level 1.5 |
| Code | Process medium temperature |
|---|---|
| T1 | -20–120℃ (attractive) |
| T2 | ≤150℃ (High-temperature type) |
| Code | Display type |
|---|---|
| R1 | Floats on the ground. |
| R2 | Floating + photo Pulse |
| Code | Signal output |
|---|---|
| F1 | No output (in situ indication) |
| F2 | Pulse out |
| F3 | RS485(Modbus) |
| F4 | (4~20)mA |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T4 (Intrinsically safe) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us