Spin-in-vortex flow metersClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

FLUME-PR-100

Spin-in-vortex flow meters

Turbo flow meters, spin vortex principles, applicable to gas measurement

01

Classification: Spinning vortex flowometer

02

Check configuration based on field work

⁇ Return to the flowometer classification of the spiral

TECHNICAL SPECIFICATIONS

Technical specifications

FLUME-PR-100

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelFLUME-PR-100
Nominal pipe sizeDN15~DN200
Measurement principleRotation vortex (the vortex vortex movement frequency is proportional to flow, voltage crystal detection)
Measured mediumGases such as natural gas, urban gas, liquefied petroleum gas, air, nitrogen, etc.
Accuracy class1.0 (optional 1.5)
Repeatability≤0.2%
Turndown ratio10:1 (optional 15:1)
Process medium temperature-20–+60℃ (normal temperature) ≤80℃ (High-temperature type)
Ambient temperature-25~+55℃
Operating pressure1.6MPa、2.5MPa、4.0MPa、6.3MPa
Flow range1.5–4000 Nm³/h (press Nominal size)
Body material304 stainless steel / 316L Stainless steel
Vortex shedder316L Stainless steel (integrated processing)
Test MethodVoltage crystals / double-voltage crystals / pressure variance
ConnectionFlanged connection GB/T 9119, Threaded connection
Temperature and pressure compensationInline thermostat sensors, autotransformation of physical volume flows
Display typeField LCD Display profile flow, total, pressure, temperature
Output signal(4–20) mA, HART, RS485 (Modbus), Pulse
Power supply24V DC, 220V AC, 3.6V
Explosion protection markingEx ia IIC T4 (intrinsically safe), Ex d IIC T6 (Flameproof)
Ingress protectionIP65 (optional IP67)
Electrical connectionM20×1.5
Pressure loss≤0.02 MPa (under rated traffic)

Product selection

FLUME-PR-100
Size and flow ranges
CodeNominal size (mm)Measurement range (m³/h)
15DN151.50~15.00
20DN203.00~30.00
25DN255.00~50.00
32DN328.00~80.00
40DN4012.00~120.00
50DN5020.00~200.00
65DN6530.00~300.00
80DN8050.00~500.00
100DN10080.00~800.00
150DN150200.00~2000.00
200DN200400.00~4000.00
Pressure rating
CodePressure rating
P11.6 MPa
P22.5 MPa
P34.0 MPa
P46.3 MPa
Body material
CodeBody material
B1304 Stainless steel
B2316L Stainless steel
Test Method
CodeTest Method
K1Voltage crystals
K2Double-pressure crystal
K3Pressure variance
Accuracy class
CodeAccuracy class
E1Level 1.0
E2Level 1.5
Process medium temperature
CodeProcess medium temperature
T1-20–60℃ (attractive)
T2≤80℃ (High-temperature type)
Connection
CodeConnection
C1Flanged connection GB/T 9119
C2Threaded connection
Temperature and pressure compensation
CodeTemperature and pressure compensation
S1None (work volume flow only)
S2Internal Temperature and pressure compensation
S3External temperature Transmitter compensation
Power supply
CodePower supply
D124V DC
D2220V AC
D33.6V lithium batteries
Signal output
CodeSignal output
F1(4~20)mA
F2(4~20)mA + HART
F3RS485(Modbus)
F4Pulse out
Explosion protection marking
CodeExplosion protection marking
U0Non-Ex
U1Ex ia IIC T4 (Intrinsically safe)
U2Ex d IIC T6 (Flameproof)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
FLUME-PR-100 Vortex Precession Flowmeter