Liquid vortex rotational measureClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-TB-100
Liquid vortex rotational measure
Liquid vortex rotational meters, positive ratio of rotation speed to flow, high accuracy, wide range of scale
01
Classification: Liquid vortex rotational measure
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-TB-100 |
|---|---|
| Nominal pipe size | DN4~DN200 |
| Measurement principle | Speed pattern (fluid propulsion turbine rotation, magnetic induction output Pulse) |
| Measured medium | Low viscosity clean liquids such as water, pure water, oil, acid alkali solutions |
| Accuracy class | 0.5 (optional 0.2, 1.0) |
| Repeatability | ≤0.1% |
| Turndown ratio | 10:1 (optional 20:1) |
| Process medium temperature | -20–+80℃ (normal) ≤120℃ (moderate) ≤150℃ (High-temperature type) |
| Ambient temperature | -25~+55℃ |
| Operating pressure | 1.6MPa、2.5MPa、4.0MPa、6.3MPa |
| Medium viscosity | ≤5 mPa·s (>5 mPa·s requiring liquid marking) |
| Body material | 304 stainless steel / 316L Stainless steel |
| Impeller material | 2Cr13 / 316L Stainless steel |
| Bearing material | Tungsten carbide alloy, graphite, ceramics |
| Connection | Flange GB/T 9119, Thread Carcass. |
| Display type | Live LCD instant moment/ Totalized flow Display |
| Output signal | (4–20) mA, HART, RS485 (Modbus), Pulse |
| Power supply | 24V DC, 220V AC, 3.6V |
| Explosion protection marking | Ex ia IIC T4 (intrinsically safe), Ex d IIC T6 (Flameproof) |
| Ingress protection | IP65 (optional IP67) |
| Electrical connection | M20×1.5 |
| Pressure loss | ≤0.05 MPa (under rated traffic) |
Product selection
FLUME-TB-100| Code | Nominal size (mm) | Measurement range (m³/h) |
|---|---|---|
| 4 | DN4 | 0.04~0.25 |
| 6 | DN6 | 0.10~0.60 |
| 10 | DN10 | 0.20~1.20 |
| 15 | DN15 | 0.60~6.00 |
| 20 | DN20 | 0.80~8.00 |
| 25 | DN25 | 1.00~10.00 |
| 32 | DN32 | 1.50~15.00 |
| 40 | DN40 | 2.00~20.00 |
| 50 | DN50 | 4.00~40.00 |
| 65 | DN65 | 7.00~70.00 |
| 80 | DN80 | 10.00~100.00 |
| 100 | DN100 | 20.00~200.00 |
| 150 | DN150 | 40.00~400.00 |
| 200 | DN200 | 80.00~800.00 |
| Code | Pressure rating |
|---|---|
| P1 | 1.6 MPa |
| P2 | 2.5 MPa |
| P3 | 4.0 MPa |
| P4 | 6.3 MPa |
| Code | Body material |
|---|---|
| B1 | 304 Stainless steel |
| B2 | 316L Stainless steel |
| Code | Bearing material |
|---|---|
| K1 | Tungsten carbide alloy |
| K2 | Graphite |
| K3 | Ceramic |
| Code | Accuracy class |
|---|---|
| E1 | Level 0.2 |
| E2 | Level 0.5 |
| E3 | Level 1.0 |
| Code | Process medium temperature |
|---|---|
| T1 | -20–80℃ (attractive) |
| T2 | ≤120℃ (medium temperature) |
| T3 | ≤150℃ (High-temperature type) |
| Code | Connection |
|---|---|
| C1 | Flanged connection GB/T 9119 |
| C2 | Threaded connection |
| C3 | Cutlery. |
| Code | Power supply |
|---|---|
| D1 | 24V DC |
| D2 | 220V AC |
| D3 | 3.6V lithium batteries |
| Code | Signal output |
|---|---|
| F1 | (4~20)mA |
| F2 | (4~20)mA + HART |
| F3 | RS485(Modbus) |
| F4 | Pulse out |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T4 (Intrinsically safe) |
| U2 | Ex d IIC T6 (Flameproof) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us