Externally-pluggized fluidsClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

LISEN-EX-100

Externally-pluggized fluids

Externally-posted liquid bitometers, externals, installation without openings

01

Classification: external drop-in

02

Check configuration based on field work

⁇ Return external drop-in-grade

TECHNICAL SPECIFICATIONS

Technical specifications

LISEN-EX-100

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelLISEN-EX-100
Measurement principlePermeable ultrasound range: Spectator attached to the outer wall of the tank, ultrasound penetrating through the wall in liquid - gas interface reflected by time difference Level
Measurement range0.3–5m / 0.5–10m / 1.0–20m (by probe and tank routing)
Measurement accuracy±0.3%FS (after marking), resolution 1mm
Dead zone0.3m / 0.5m / 1.0m (corresponding Range)
Compatible tank wall materialsCarbon steel, stainless steel, aluminium, glass steel, plastic (PE/PP/PVC), squirm glass (2–60mm)
Applicable tank diameters≥DN300 (small cans to pick high frequency probes)
Process medium temperature-40–+120℃ (hot detector to +200℃, insulation)
Ambient temperature-40~+70℃
Operating pressureConstant pressure –2.5MPa (outpost unexposed medium, pressure resistance determined by tank)
Probe mountingGarbages for the outer wall of the bottom (coupt + Stainless steel carcasses/magnetic bands) or for the outer wall
Probe material316L stainless steel shell + ceramics/ PEEK acoustic interface, IP68
Indicator head materialEmbrace aluminium alloy / 316L stainless steel (optional), IP66/67
Output signal4–20mA + HART two-wire (standard) RS485 (MODBUS) optional /relay ×2
Power supply16–36VDC two-wire / 220VAC Four-wire Optional
Display type6 bit LCD + Chinese English menu free of magnetic pen Configuration
Temperature compensationInternal Pt1000 full Range acoustic temperature compensation to support the self-correction of medium acoustic speed
Explosion protection markingEx d II C T6 Gb / Ex ia II C T4 Ga (Optional)
Applicable standardsGB/T 28474 / GB 3836.1 / JJG 971
Product featuresUninterrupted, unopened, uncontacted, closed jars suitable for toxic, flammable, explosive, corrosive, high-purity, sanitary medium
Suitable mediaLiquefied gas, liquid ammonia, diesel gasoline, acidic solvents, edible oils, pharmacies, pure water, etc.

Product selection

LISEN-EX-100
Measurement range (Range)
CodeMeasurement range (Range)
L10.3~5m
L20.5~10m
L31.0~20m
Probe type
CodeProbe type
P1Standard probe (carbon steel / stainless steel can, wall thickness ≤30mm)
P2HF probes (small cans/ thin wall plastic tanks)
P3High-temperature probe (media ≤200℃ with insulation)
Indicator head material
CodeIndicator head material
M1Embrace aluminium alloy (Standard)
M2316L Stainless steel (reserve/sanitation)
Mounting accessories
CodeMounting accessories
A1+ Stainless steel carcasses (Standard)
A2Magnetic rectangles (iron tanks)
A3Welding fittings + Flange
Output signal
CodeOutput signal
O14–20mA + HART (Standard)
O2RS485(MODBUS-RTU)
O34–20mA + 2 routing relays
Power supply
CodePower supply
P124VDC Two-wire (Standard)
P2220VAC Four-wire
P3Battery power (Integral, free of wire)
Explosion protection marking
CodeExplosion protection marking
X1Non-Ex
X2Flameproof Ex d II C T6 Gb
X3Intrinsically safe Ex ia II C T4 Ga

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
LISEN-EX-100 External (Clamp-On) Ultrasonic Level Meter