Magnetic stretcher bitometersClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-MS-100
Magnetic stretcher bitometers
Magnetic stretching fluids, magnetic stretching principles, mm-grade precision
01
Classification: Magnetic scalables
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-MS-100 |
|---|---|
| Measurement principle | Magnetostrictive Effect: Pulse electric currents generate a circular magnetic field in the wavering with a platinum permutal magnetic ring, measured by time of transmission Level |
| Measurement type | Level (L) / Oil and water interface (I) / level + Multi-point temperature (T) |
| Measurement range | 300–6000mm (hard rod) / to 20000mm (soft cable) |
| Measurement accuracy | ±0.5mm or ±0.05%FS (takes big) |
| Resolution | 0.1mm |
| Repeatability | ±0.2mm |
| Medium density | ≥0.45g/cm3 (interface measurement needs density differential ≥0.05g/cm3) |
| Operating pressure | -0.1–4.0MPa (high pressure to 10MPa) |
| Process medium temperature | -40–+120℃ (standard) / -40–+200℃ (High-temperature type) |
| Sensing rod material | 316L stainless steel (Hastelloy / PTFE cover Optional) |
| Float material | 316L stainless steel / PTFE covered |
| Temperature sensors | Optional 2–8 dot Pt100 (temperature accuracy ±0.5℃) |
| Connection | Top DN50/DN80/DN100 flange / M20×1.5 Thread |
| Output signal | 4–20mA (DC) two-wire / RS485 (MODBUS) / HART Optional |
| Power supply | 12–36VDC (standard 24VDC) |
| Display type | 4 bit LCD LCD Display (can Display Level / Interface/ Temperature) |
| Ingress protection | IP66 / IP67 |
| Explosion protection marking | Ex d II C T6 Gb / Ex ia II C T4 Ga (Optional) |
| Applicable standards | JB/T 12083 / GB/T 17614 / SIL2 (Optional) |
| Suitable media | Completed oils, chemical solvents, LNG / liquid ammonia, water treatment; tank stock measurement, interface (oil water) detection, trade interface Level measurement |
Product selection
LISEN-MS-100| Code | Sensing rod type |
|---|---|
| S1 | Hardbar (≤6000mm) |
| S2 | Soft cable (6000–20000mm) |
| Code | Measurement range |
|---|---|
| L1 | 300~1500mm |
| L2 | 1500~3000mm |
| L3 | 3000~6000mm |
| L4 | 6000–20000mm (soft cable, Specify when ordering) |
| Code | Measurement function |
|---|---|
| T1 | Level |
| T2 | Level + Interface (oil and water) |
| T3 | Level + multi-point temperature (Pt100×2~8) |
| Code | Accuracy class |
|---|---|
| E1 | ±1mm |
| E2 | ±0.5mm (Standard) |
| E3 | ±0.05%FS |
| Code | Sensing rod material |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | 316L + PTFE wrap (strength corrosive) |
| Code | Connection |
|---|---|
| F1 | DN50 Flange |
| F2 | DN80 / DN100 Flange |
| F3 | M20×1.5 Thread |
| Code | Output signal |
|---|---|
| O1 | 4–20mA Two-wire (Standard) |
| O2 | 4~20mA + HART |
| O3 | RS485 (MODBUS-RTU) Multiparameter output |
| Code | Explosion protection marking |
|---|---|
| X1 | Non-Ex |
| X2 | Flameproof Ex d II C T6 Gb |
| X3 | Intrinsically safe Ex ia II C T4 Ga |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us