Copper alloyClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-AV-100
Stainless steel resistant to shock pressure table
Stinkless steel is resistant to shock pressure meters, copper alloy configuration. Silicon oil is resistant to shock, and applies to pulses and mechanical vibrations.
01
Classification: stainless steel earthquake-resistant pressure table
02
Structure form: copper alloy
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-AV-100 |
|---|---|
| Measurement principle | Resilient (bourdon tube) Mechanical deformation measurement + Recharge blocker |
| Case material | 304 Stainless steel Stamped, filling sealed surfaces |
| Dial diameter | Φ63、Φ100、Φ150 |
| Construction | Bottom mount without flange or with an optional front or rear flange |
| Measurement range | -0.1–0MPa to 0–25MPa (include Vacuum) |
| Accuracy class | Level 1.6 |
| Elastic sensing element material | Phosphor bronze / tin Phosphor bronze Bourdon tube (Copper alloy) |
| Connection fitting material | Brass H62 / 304 Stainless steel Optional |
| Connection thread | M14×1.5、M20×1.5、G1/2、1/2NPT |
| Process medium temperature | -20–+60℃ (Glycerin Damping fluid) |
| Operating pressure | Static load: ≤ upper range limit 2/3; pulse dynamic load h: ≤ upper range limit 1/2 |
| Damping fluid | Food class Glycerin (Silicone oil Optional, Low-temperature type) |
| Ingress protection | IP65 (fellow seal) |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Suitable media | Non-corrosive media such as water, oil, gas (Copper alloy contact surface) |
| Ambient temperature | -20–+60℃ (fellow type, Damping fluid sticky with temperature) |
| Vibration resistance | Recharged blocker structure for powerful pulses/strengths such as pumps, compressors, etc. |
| Applicable standards | GB/T 1226 General Pressure Sheet/ JB/T 5518 Seismic Stress Sheet/ JJG 52 |
Product selection
PREST-AV-100| Code | Bourdon tube materials |
|---|---|
| B1 | Phosphor bronze (Conventional) |
| B2 | Tin Phosphor bronze (enhanced pulse life) |
| Code | Dial diameter |
|---|---|
| D1 | Φ63 |
| D2 | Φ100 |
| D3 | Φ150 |
| Code | Mounting |
|---|---|
| L1 | Bottom mount without flange |
| L2 | Bottom mount with front flange |
| L3 | Bottom mount with rear flange |
| Code | Measurement range (MPa) |
|---|---|
| R1 | -0.1–0 (Vacuum) |
| R2 | -0.1~0.9 / -0.1~1.5 |
| R3 | 0~0.6 / 0~1.0 / 0~1.6 |
| R4 | 0~2.5 / 0~4.0 / 0~6 |
| R5 | 0~10 / 0~16 / 0~25 |
| Code | Connection thread |
|---|---|
| G1 | M14×1.5 |
| G2 | M20×1.5 |
| G3 | G1/2 |
| G4 | 1/2NPT |
| Code | Damping fluid |
|---|---|
| F1 | Food class Glycerin (conventional) |
| F2 | Silicone oil (low-temperature type, -40℃) |
| Code | Mounting bracket |
|---|---|
| U1 | No rack (Thread directly installed) |
| U2 | Three valves/ball valves attached (Specify when ordering) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us
