Stainless steel diaphragms resistant to shock pressure tableClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-DI-250
Stainless steel diaphragms resistant to shock pressure table
The stainless steel diaphragm is resistant to shock pressure meters, diaphragms + the seismic protection is dual.
01
Classification: stainless steel diaphragm seismic pressure table
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-DI-250 |
|---|---|
| Measurement principle | + diaphragm seal Bourdon tube mechanical measurement of recharging nitric resistance |
| Case material | 304 / 316L stainless steel body stamped, full-filled shell IP65 |
| Dial diameter | Φ63、Φ100、Φ150 |
| Connection | Thread Direct / Flange / Cassette (by accompanied diaphragm) |
| Connection thread | M20×1.5、G1/2、1/2NPT、R1/2 |
| Diaphragm material | 316L, Hastelloy C276, tantalum (Optional) |
| Diaphragm seal body material | 316L Stainless steel |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Measurement range | 0–0.1MPa to 0–25MPa (include Vacuum) |
| Accuracy class | 1.6 Level (Diaphragm-containing system) |
| Process medium temperature | -20–+100℃ (silicone oil recharging, high-temperature type to +200℃ requiring bulk heat) |
| Operating pressure | Static load: ≤ upper range limit 2/3; dynamic load (pulsation): ≤ upper range limit 1/2 |
| Vibration resistance | Recharge blocker, resistant to 25m/s2 peak acceleration vibration (pressure pulse condition) |
| Seal fill fluid | Silicone oil (standard) / low-temperature silicone oil / food-grade glycerin |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Suitable media | High viscosity, crystallity, strong corrosive, strong pulse/vibration process medium |
| Applicable standards | GB/T 1226 / JB/T 8611 diaphragm pressure table/ JB/T 5518 shock resistant pressure table/ JJG 52 |
| Ambient temperature | -20–+60℃ (fellow type) |
| Diaphragm seal system | Bourdon tube - diaphragm is completely closed, impregnated, crystal-resistant, corrosive, pulse-resistant |
Product selection
PREST-DI-250| Code | Connection Form |
|---|---|
| J1 | Thread Direct formula (M20×1.5 down) |
| J2 | Thread Direct formula (G1/2 / 1/2NPT) |
| J3 | Flange (DN25–DN100, PN1.0–4.0) |
| J4 | Carcass (sanitary type Tri-Clamp) |
| Code | Diaphragm material |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Tantalum Ta (strong corrosive) |
| Code | Dial diameter |
|---|---|
| D1 | Φ63 |
| D2 | Φ100 |
| D3 | Φ150 |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 / 0~0.6 |
| R3 | 0~1.0 / 0~1.6 / 0~2.5 |
| R4 | 0~4 / 0~6 / 0~10 |
| R5 | 0~16 / 0~25 |
| R6 | -0.1–0 (vacuum) / -0.1–2.4 |
| Code | Fill fluid (damping) |
|---|---|
| F1 | Standard silicone oil (-20–+100℃) |
| F2 | Low-temperature silicone oil (-40–+100℃) |
| F3 | Food class Glycerin (food/medicine) |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.6 |
| E2 | Level 1.0 |
| Code | Heat-dissipation accessories |
|---|---|
| H1 | No dispersible heat |
| H2 | Bulk heat (media ≤200℃) |
| H3 | Cooled plate tubes (high temperature and corrosive) |
| Code | Case material |
|---|---|
| C1 | 304 Stainless steel |
| C2 | 316L Stainless steel (corrosive environment) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us