Stainless steel resists shock point pressure tableClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-EA-100
Stainless steel resists shock point pressure table
Stainless steel resists seismic point pressure table, seismic point pressure table
01
Classification: stainless steel earthquake-resistant point pressure table
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-EA-100 |
|---|---|
| Measurement principle | Mechanical measurement via an elastic sensing element (Bourdon tube), liquid damping for vibration resistance, and a magnetically assisted switch contact output |
| Case material | 304 / 316L stainless steel body stamped, full-filled shell IP65 |
| Dial diameter | Φ100、Φ150 |
| Connection | Thread Direct (down) / Back mount with flange (panel installation) |
| Connection thread | M20×1.5、G1/2、1/2NPT、R1/2 |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Measurement range | 0–0.1MPa to 0–60MPa (include Vacuum) |
| Accuracy class | Level 1.6 |
| Contact arrangement | Magnetic aid electrical contact, high and low limits sets the pointer 1, only Damping fluid does not affect the setting operation |
| Setpoint range | Measurement range 5%–95% High and low limits can be set independently |
| Contact rating | AC 220V / 1A (dehibition), AC 380V / 0.5A |
| Switching method | Normally open (NO) / normally closed (NC) / Closed once (SPDT) |
| Output Method | Voltage-free dry contact switch signal (direct access to intermediate relays/contacts) |
| Process medium temperature | -20–+100℃ (Silicone oil refill) |
| Operating pressure | Static load: ≤ upper range limit 2/3; dynamic load (pulsation): ≤ upper range limit 1/2 |
| Vibration resistance | Recharge blocker, resistant to 25m/s2 peak acceleration vibration (pressure pulse condition) |
| Seal fill fluid | Silicone oil (standard) / low-temperature silicone oil (-40℃) |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Applicable standards | GB/T 1226 / JB/T 5518 Expressible Pressure Sheet / JB/T 9273 electrical contact / JJG 52 |
| Suitable media | Pressure control for strong pulses, strong vibration conditions, locks and Alarm |
| Ambient temperature | -20~+60℃ |
Product selection
PREST-EA-100| Code | Dial diameter |
|---|---|
| D1 | Φ100 |
| D2 | Φ150 |
| Code | Mounting |
|---|---|
| A1 | Bottom mount without flange (Thread Direct) |
| A2 | Bottom mount with rear flange |
| A3 | Back mount with front flange (panel embedded) |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 / 0~0.6 |
| R3 | 0~1.0 / 0~1.6 / 0~2.5 |
| R4 | 0~4 / 0~6 / 0~10 |
| R5 | 0~16 / 0~25 / 0~40 / 0~60 |
| R6 | -0.1–0 (vacuum) / -0.1–2.4 |
| Code | Contact arrangement |
|---|---|
| C1 | I normally open (NO) |
| C2 | I normally closed (NC) |
| C3 | SPDT) |
| C4 | Double ceiling + 1st limit (III Contact) |
| Code | Fill fluid (damping) |
|---|---|
| F1 | Standard silicone oil (-20–+100℃) |
| F2 | Low-temperature silicone oil (-40–+100℃) |
| Code | Case material |
|---|---|
| C1 | 304 Stainless steel |
| C2 | 316L Stainless steel (corrosive environment) |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.6 |
| E2 | Level 1.0 |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us