Non-resilted steel power point pressure tableClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-EC-150
Non-resilted steel power point pressure table
stainless steel point pressure table, point output, alarm and control
01
Classification: stainless steel point pressure table
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-EC-150 |
|---|---|
| Measurement principle | Bourdon tube) Mechanical measurement + Magnetic aid Electrical contact Switch output |
| Case material | 304 Stainless steel Stamped sealed shell |
| Dial diameter | Φ100、Φ150 |
| Connection | Thread Direct (down) / Back mount with flange (panel installation) |
| Connection thread | M20×1.5、G1/2、1/2NPT、R1/2 |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Measurement range | 0–0.1MPa to 0–60MPa (include Vacuum) |
| Accuracy class | Level 1.6 |
| Contact arrangement | Magnetic electrical contact, high and low limits set the pointer 1 only, finely adjusted with slow gear |
| Setpoint range | Measurement range 5%–95% High and low limits can be set independently |
| Contact rating | AC 220V / 1A (dehibition), AC 380V / 0.5A |
| Switching method | Normally open (NO) / normally closed (NC) / Closed once (SPDT) |
| Output Method | Voltage-free dry contact switch signal (direct access to intermediate relays/contacts) |
| Process medium temperature | -40~+100℃ |
| Operating pressure | Static load: ≤2/3 of the upper range limit. Dynamic load: ≤1/2 of the upper range limit. |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Ingress protection | IP54 (shell sealed) |
| Suitable media | Non-corrosive gases/liquids with High and low limits pressure automatic control, lock Alarm |
| Ambient temperature | -20~+60℃ |
Product selection
PREST-EC-150| Code | Dial diameter |
|---|---|
| D1 | Φ100 |
| D2 | Φ150 |
| Code | Mounting |
|---|---|
| A1 | Bottom mount without flange (Thread Direct) |
| A2 | Bottom mount with rear flange |
| A3 | Back mount with front flange (panel embedded) |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 / 0~0.6 |
| R3 | 0~1.0 / 0~1.6 / 0~2.5 |
| R4 | 0~4 / 0~6 / 0~10 |
| R5 | 0~16 / 0~25 / 0~40 / 0~60 |
| R6 | -0.1–0 (vacuum) / -0.1–2.4 |
| Code | Contact arrangement |
|---|---|
| C1 | I normally open (NO) |
| C2 | I normally closed (NC) |
| C3 | SPDT) |
| C4 | Double ceiling + 1st limit (III Contact) |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.6 |
| E2 | Level 1.0 |
| Code | Elastic sensing element material |
|---|---|
| M1 | 316L Stainless steel Bourdon tube |
| M2 | Tin Phosphor bronze Bourdon tube (conventional) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us