Single-crystal silica differential transmitterClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PRETRAN-SIL-150
Single-crystal silica differential transmitter
Monocrystalline silicon differential pressure transmitter with ±0.075%, ±0.1%, or ±0.2% accuracy options.
01
Classification: Single-crystal silica differential transmitter
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PRETRAN-SIL-150 |
|---|---|
| Measurement principle | Monocrystalline silicon piezoresistive or resonant differential pressure sensor with digital signal processing |
| Measurement type | Differential pressure (D) / flow with an orifice plate (Q) / level (L) |
| Measurement range | Ranges from 0–100 Pa to 0–6 MPa; adjustable 100:1 turndown |
| Accuracy class | ±0.075% / ±0.1% / ±0.2% (Optional) |
| Maximum static pressure | 10MPa / 25MPa (Optional) |
| Overload capacity | One-way static pressure protection: 14 MPa in the forward direction for the 25 MPa static pressure version |
| Output signal | 4–20mA (DC) + HART / RS485 (MODBUS) Optional |
| Power supply | 12–36VDC (standard 24VDC) |
| Load capacity | (Supply voltage − 12 V) / 0.02 A, up to 1.2 kΩ |
| Sensor capsule | Monocrystalline silicon sensor with 316L isolation diaphragm (optional Hastelloy C276 or tantalum) |
| Construction | Direct-mount three-valve manifold or dual remote seals (1–15 m capillaries) |
| Process connection | 1/2NPT (F) three-valve manifold interface / DN50–DN80 flange (PN1.0–4.0) |
| Display type | 5-digit local LCD showing percentage or engineering units, with rotatable display and magnetic adjustment through the cover |
| Damping time | 0–32s Configurable |
| Stability | ±0.1% per year, with an optional five-year calibration interval |
| Process medium temperature | -40–+120℃ (dual remote seals to +350℃) |
| Ambient temperature | -40~+85℃ |
| Temperature compensation | Digital temperature compensation throughout the −10 to +60 °C range |
| Ingress and explosion protection | IP66/IP67; Ex d II C T6 Gb / Ex ia II C T4 Ga (Optional) |
| Fill fluid | Silicone oil (standard) / low-temperature silicone oil / food-grade glycerin |
| Applicable standards | GB/T 17614 / IEC 61010 / HART 7 / SIL2 (hardware redundancy Optional) |
| Suitable media | Gas, liquid, steam differential pressure / flow/ level measurement, high accuracy measurement application (compatible 316L) |
Product selection
PRETRAN-SIL-150| Code | Construction |
|---|---|
| S1 | Three-valve manifold straight chain (Standard) |
| S2 | Double flat Flange long-distance |
| S3 | Double-plug Flange long-distance (high temperature/slurry) |
| Code | Range options (kPa) |
|---|---|
| R1 | 0–100Pa–0–1kPa (micro Differential pressure) |
| R2 | 0~1kPa~0~10kPa |
| R3 | 0~10kPa~0~100kPa |
| R4 | 0~100kPa~0~6000kPa(6MPa) |
| Code | Accuracy class |
|---|---|
| E1 | ±0.2% |
| E2 | ±0.1% |
| E3 | ±0.075% |
| Code | Maximum static pressure |
|---|---|
| P1 | 10MPa |
| P2 | 25MPa |
| Code | Output signal |
|---|---|
| O1 | 4~20mA + HART |
| O2 | 4~20mA + RS485(MODBUS-RTU) |
| Code | Isolation diaphragm / flange materials |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Tantalum Ta (strong corrosive) |
| Code | Capillary length (remote seal) |
|---|---|
| C1 | Straight chain (no Capillary) |
| C2 | 2m (Standard) |
| C3 | 5m |
| C4 | 10m / 15m (Specify when ordering) |
| Code | Display and adjustment |
|---|---|
| L1 | No display (Standard header) |
| L2 | 5 LCD Display |
| L3 | LCD + Magnetic pens are off the grid. |
| Code | Explosion protection marking |
|---|---|
| X1 | Non-Ex |
| X2 | Flameproof Ex d II C T6 Gb |
| X3 | Intrinsically safe Ex ia II C T4 Ga |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us