- Thermal dolls.Click on the picture to zoom in.
PRODUCT SPECIFICATIONS
TEMPSEN-TC-250
- Thermal dolls.
Thermal dolls, the costumes, the softer.
01
Classification: Zip-A-Pop
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | TEMPSEN-TC-250 |
|---|---|
| Measurement principle | Thermal power effects: two different metal conductors form circuits, heat and cold temperature differentials generate thermal electrical motion, and the temperature is converted by instrument |
| Sensor type | K (nickel chromium - nickel silicon) / N / E / J / T / S / B (Optional) |
| Measurement range | K 0–1200℃ / N 0–1200℃ / E 0–800℃ / J 0–750℃ / T -200–+350℃ / S 0–1600℃ |
| Accuracy class | I Level ±1.5℃ or ±0.4% | t | / II Level ±2.5℃ or ±0.75% | t zirconium (extracts high value) |
| Construction | Mineral-insulated Integration: Thermal electrodes + high purity MgO insulation powder + Stainless steel /heat-resisting alloy shield, pulled back into whole, bendable |
| Mineral-insulated probe OD | φ1.5, φ2, φ3, φ4, φ5, φ6, φ8 (optional, φ3/φ6 Typical) |
| Sheath material | 304 / 316L / 321 stainless steel Inconel 600 GH3030 high-temperature alloy Platinum-rhodium Puppet with jade tube |
| Insertion depth | 50 / 75 / 100 / 150 / 200 / 300 / 500 / 750 / 1000mm (can be customised for any length) |
| Minimum bend radius | ≥5× mineral-insulated probe OD, bends should be at the hot end ≥100mm |
| Thermal response time | 0.5 ≤5s (φ3 mineral-insulated) Media flow speed ≥1m/s); φ6 about ≤10s |
| Process connection | M8×1 / M12×1.5 / M20×1.5 / M27×2 / G½ Thread Adjustable compression fitting Flange, welding Optional |
| Junction box | Waterproof aluminium alloy/ stainless steel junction box IP65; Splashproof type Flameproof type, Intrinsically safe type Optional |
| Cold junction compensation | Junction box Inline Pt100 Cold junction compensation (when integrated Transmitter) |
| Insulation resistance | ≥100MΩ (500VDC, constant temperature); ≥10MΩ (500VDC, 500℃) |
| Vibration resistance | 10–500Hz, amplitude 0.35mm, Vibration resistance better than assembly structure |
| Ambient temperature | -40–+80℃ (Junction box) |
| Operating pressure | Constant pressure –16MPa (small Nominal size Mineral-insulated protective shield for high pressure pipe) |
| Output signal | Thermoelectric EMF mV signal / integration 4–20mA + HART transformation (Optional) |
| Ingress protection | IP65 / IP67 (Optional) |
| Applicable standards | IEC 60584 / JB/T 5582 《 mineral-insulated thermocouple 》/ GB/T 30429 |
| Suitable operating conditions | High-temperature high-pressure and vibrating events such as high-voltage steam pipes, steam turbines, gas turbine exhausts, crack furnace walls, engine exhausts, Vacuum furnaces and heat processors |
| Product features | Small outer diameter, low heat inertia, extremely fast response; bendable to adapt to complex measurements; high-pressure resistance to vibration; randomly interceptable unit length to facilitate spare parts management |
Product selection
TEMPSEN-TC-250| Code | Sensor type |
|---|---|
| K1 | Type K (general, ≤1200℃) |
| K2 | N (anti-temperature oxidation, ≤1200℃) |
| K3 | E (sensitized, ≤800℃) |
| K4 | J (≤750℃) |
| K5 | Type T (low temperature -200–+350℃) |
| K6 | S / B (precious metals, ≤1600/1700℃) |
| Code | Measurement range |
|---|---|
| L1 | -200~+400℃ |
| L2 | 0~800℃ |
| L3 | 0–1200℃ (Standard) |
| L4 | 0–1600℃ (Pull metal doll) |
| Code | Accuracy class |
|---|---|
| E1 | Level I |
| E2 | II Class (Standard) |
| Code | Mineral-insulated probe OD |
|---|---|
| S1 | φ1.5 / φ2 (light and quick response) |
| S2 | φ3 |
| S3 | φ4 / φ5 |
| S4 | φ6 (Standard) |
| S5 | φ8 |
| Code | Sheath material |
|---|---|
| M1 | 304 Stainless steel |
| M2 | 316L Stainless steel (resisting) |
| M3 | 321 Stainless steel (Handy-temperature) |
| M4 | Inconel 600 / GH3030 (high temperature corrosion) |
| M5 | Gwangyu tubes (precious metal dolls) |
| Code | Process connection |
|---|---|
| F1 | M8×1 / M12×1.5 Thread |
| F2 | M20×1.5 / M27×2 Thread |
| F3 | G½ thread + Adjustable compression fitting |
| F4 | DN25–DN50 Flange |
| F5 | Welding / No connection (direct lead) |
| Code | Junction box / output |
|---|---|
| X1 | Waterproof boxes IP65 + thermoelectric EMF mV |
| X2 | Waterproof boxes IP65 + integrated 4–20mA |
| X3 | Flameproof Ex d II C T6 + 4–20mA |
| X4 | Shielded cable Directly elicit |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us