Thermal dolls for temperature measurement at the stationClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
TEMPSEN-TC-350
Thermal dolls for temperature measurement at the station
Thermal dolls for temperature measurement at stations, thermoelectric dolls for temperature measurement at stations
01
Classification: thermometrofits for thermostats at stations
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | TEMPSEN-TC-350 |
|---|---|
| Measurement principle | Thermal power effects: two different metal conductors form circuits, heat and cold temperature differentials generate thermal electrical motion, and the temperature is converted by instrument |
| Sensor type | K (Nichchromium - Nickel Silicon, standard) / E / J / N / T / S / B (Optional) |
| Measurement range | K 0–1200℃ / N 0–1200℃ / E 0–800℃ / J 0–750℃ / T -200–+350℃ / S 0–1600℃ / B 600–1700℃ |
| Accuracy class | I Level ±1.5℃ or ±0.4% | t | / II Level ±2.5℃ or ±0.75% | t (extracting value); duplex Coherence ≤1.5℃ |
| Construction | Duplex mineral-insulated: φ3–φ6 duplex mineral-insulated Ichic + Protect the condom. + Waterproof/ Flameproof Junction box; three-point structure with tubewalls (direct welding/tension), smoke temperature (resistible grinding) and soda |
| Protection tube material | 1Cr18Ni9Ti / 316L stainless steel / 2520 (310S) Heat-resistant steel / 12Cr1MoV / Silicon carbide coating (smoky temperature resistant) |
| Protection tube dimensions | φ12 / φ16 / φ20 / φ25 × L (insertion depth 75–1500mm optional); pipe wall optional φ6–φ8 Mineral-insulated direct weld structure |
| Process connection | M20×1.5 / M27×2 thread; DN25–DN80 flange (PN2.5–PN16) Welded seats (welded under the hot-faced walls with pressurized card sets) |
| Junction box | Waterproof. cast iron / 316L stainless steel junction box IP65 (standard); optional flameproof Ex d II C T6, high-temperature type (Environment) ≤150℃) |
| Cold junction compensation | Junction box inline Pt100 cold junction compensation (with integration transmitter); support DCS endbox cluster Cold junction compensation |
| Response time | And 0.5 ≤10s (φ16 protection tube, smoke flow speed ≥5m/s); pipe wall ≤5s |
| Insulation resistance | ≥100MΩ (500VDC, constant temperature); ≥10MΩ (500VDC, 800℃ later) |
| Vibration resistance | 10–500Hz, amplitude 0.35mm, corresponding to GB/T 2423; applied to the boiler chamber/fibre high vibration detection point |
| Pressure withstand rating | Protection tube 1.5 times nominal pressure 1min no leakage; soda pipe type PN16–PN25 |
| Ambient temperature | -40–+80℃ (junction box); high-temperature type to +150℃ |
| Operating pressure | Common pressure –25MPa (soft water pipe type); furnace chamber/fibre spot is constant or micro-correct pressure |
| Output signal | Duplex thermoelectric EMF mV Signal/ One mV + One. 4–20mA Change / duplex 4–20mA + HART (Optional) |
| Ingress protection | IP65 / IP67 (Optional) |
| Applicable standards | IEC 60584 / JB/T 9238 / GB/T 30429 |
| Suitable operating conditions | Boiler overheater/reheater pipe wall temperature, chamber export and horizontal smoke temperature, provincial coal and air prep entrances, main steam and reheated steam pipe, gas turbine tank and high temperature sites at stations Flange bolt metal temperature, coal grinder export, etc. |
| Product features | Duplex Redundancy DCS Double-channel and bad points; plume-walls with compact/ straight-weld structures that expand without additional stress; smoke-temperature silicate or milled alloy head resistant to ash erosion; point-by-point supply coded according to a cluster list of points |
Product selection
TEMPSEN-TC-350| Code | Sensor type |
|---|---|
| K1 | Type K (general, ≤1200℃, Standard) |
| K2 | N (anti-temperature oxidation, ≤1200℃) |
| K3 | E (sensitized, ≤800℃) |
| K4 | J (≤750℃) |
| K5 | Type T (low temperature -200–+350℃) |
| K6 | S / B (≤1600/1700℃, Specify when ordering) |
| Code | Measurement range |
|---|---|
| L1 | -200–+400℃ (temperature segment) |
| L2 | 0–600℃ (province coal/empty prep) |
| L3 | 0~800℃ |
| L4 | 0–1200℃ (heated surface walls/smoking temperature) |
| L5 | 0–1600℃ (S/B) |
| Code | Accuracy class |
|---|---|
| E1 | Level I |
| E2 | II Class (Standard) |
| Code | Sensing point construction |
|---|---|
| T1 | Pipe Insertion (Thread / Flange) |
| T2 | Heated-faced wall (tweed, φ6–φ8 Mineral-insulated) |
| T3 | Plumb pressure tight (disable, bandwidth pressurized) |
| T4 | Boiler/fibre-temperature (branding) |
| T5 | Axle bearings/cylinder metal temperature (crushed spring) |
| Code | Protection tube material |
|---|---|
| M1 | 1Cr18Ni9Ti Stainless steel |
| M2 | 316L Stainless steel (Standard) |
| M3 | 2520 (310S) Hot-resistant steel (high temperature smoke) |
| M4 | 12Cr1MoV / T91 heat-resistant steel (pipe wall homogenesis) |
| M5 | Silicon carbide coating (fly ash erosion) |
| Code | Process connection |
|---|---|
| F1 | M20×1.5 / M27×2 Thread |
| F2 | DN25–DN50 flange PN2.5 / PN6.4 |
| F3 | DN80 flange PN16 Flange |
| F4 | Welded seats. |
| F5 | Tighten the card set / spring pressure (disable) |
| Code | Junction box / output |
|---|---|
| X1 | Waterproof boxes IP65 + duplex mV |
| X2 | 316L stainless steel + duplex mV |
| X3 | High-temperature type box + mV / 4–20mA |
| X4 | Flameproof Ex d II C T6 + 4–20mA |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us