Smart Digital Flash AlertClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
VISCON-AL-150
Smart Digital Flash Alert
Smart Digital Flash Alert, Smart Digital Flash Alert
01
Classification: Smart digital flash alarm
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | VISCON-AL-150 |
|---|---|
| Product function | Add a bit of liquid crystal to the traditional flash Alarm: make the Han character description, action time and current state of every road a list of textable pages Configuration done with the electric-capable key menu or the upper machine software; suitable for the frequent change of the point, the need to leave Alarm log, without wanting to change the lightboard fonts one by one |
| Input loop | Standard 8 Lou, optional 16 / 24 / 32 Roads; photo-separation, isolation voltage 1500VAC;routing optional dry contact, wet contact 24VDC, TTL Level |
| Input characteristics | Dry contact Query voltage 24VDC / 5mA; wet contact High level ≥18V Decision Action; input filter 10–1000ms on a road-by-road basis to avoid misrepresentation caused by the contact vibrating and transient interference |
| Display unit | 128×64 dot-string liquid crystal (optional 3.5 inch colour screen), 4 line × 12 Han; scroll display bits, 12 characters per road, action time (hours: seconds) and current state |
| Alarm sequence | The selection can be made from the time series of the four industries by road: 1 flash-confirmation-reverse; 2 flash-confirmation-peace-reverse; 3 start-up flash, remaining flat light; 4 beam-free (minor hints); and one hardware suitable for multiple workshop habits can be used for different paths within the same table. |
| Audible and visual output | Panel LED indicates three states of excess, confirmation, failure; built-in beepers ≥85dB, Optional external transmitters; sound mode can be continuous, intermittent, silent |
| First-out and sequence memory | Before recording 8 Alarm action sequence and millisecond timescale, which can be viewed over the LCD page and used to restore the accident chain |
| Alarm log | Inline 4MB iron storage without loss of power; available 1000 event (channel number, action or restoration, time) to support retrieval by time or channel and direct viewing on screen without the need to connect computers |
| Output contacts | 1 group relays (250VAC/2A) or 8/16 road shared group public contact points; plus three sets of auxiliary contact points Alarm, sound, malfunction (power failure or self-check failure) |
| Configuration method | Panel four-key Chinese menu configuration (with password protection); or RS485 with upholstery software batch number, Alarm sequence and filter time, one-time configuration of the whole screen |
| Communication interface | RS485 (Modbus RTU from station) standard; optional Ethernet; supports the active uploading of alarm event to the top or DCS, and the memory map can be customised |
| Self-diagnosis | Road-by-way detection Input loop breakwire, short circuit, relay drive failure and power voltage anomaly; when failure is detected, the failure light is activated and text tips are given to avoid the failure of the Alarm device itself without any knowledge |
| Power supply | AC 85–265V (50/60Hz) or DC 24V, power ≤12VA; Optional double power redundancy input |
| Enclosure and protection | Disk assembly 160×80mm or 96×96mm, front plate protection IP54 (optional IP65), backend IP20 |
| Panel cutout dimensions | 152 × 76mm (160×80)/ 92 × 92mm (96×96), insertion depth ≤150mm |
| Instrument weight | About 1.2kg (32 road configuration) |
| Applicable standards | JB/T 7352 (light alarm) / GB/T 17626 (EMC) / GB/T 34037 (industrial process measurement recorder) |
| Typical applications | Multi-point locktips for chemical and pharmaceutical laboratories, kiln burning and winder state surveillance, water plant pump and pumping systems, air room environment and fire protection, test stage multi-road monitoring, remote alert front for unmanned stations |
| Product features | The Han character description is direct Display (a) On screen, no more labeling; Alarm sequence I'll take it from here. Optional A set of hardware can accommodate both old operating habits and new norms; time-standarded incident logs allow for accident re-entry to be documented; Configuration The software will be distributed in bulk without the need to break the panel; there will be self-diagnosis and no silence at a critical time |
Product selection
VISCON-AL-150| Code | Number of loops |
|---|---|
| N08 | 8 backway |
| N16 | 16 backway (Standard) |
| N24 | 24 backway |
| N32 | 32 backway |
| Code | Input Type |
|---|---|
| I1 | Dry contact |
| I2 | Wet contact 24VDC |
| I3 | TTL level |
| I4 | Dry and wet mix, road by road Configuration (Standard) |
| Code | Display configuration |
|---|---|
| D1 | 128×64 dot array crystal (Standard) |
| D2 | 3.5 inch colour screen (colour distinction exceeding limit/restoration) |
| D3 | + independent of every road LED indicator |
| Code | Alarm sequence |
|---|---|
| Q1 | Flash - Confirm - Restore |
| Q2 | Flash - Confirm - Flat - Reset (Standard) |
| Q3 | The flash, the rest of the light. |
| Q4 | Road-by-road (four time series mixed) |
| Code | Recording capacity |
|---|---|
| M0 | No incidents recorded |
| M1 | 1000 incidence (4MB iron, Standard) |
| M2 | 1000 + 8MB extension (approximately 20000) |
| Code | Output contacts |
|---|---|
| P1 | Group Public Contacts (8 Roads 2 Group) |
| P2 | Independent 1 each route (250VAC/2A) |
| P3 | Three sets of aids + public/sound/facility per road (Standard) |
| Code | Communication interface |
|---|---|
| T0 | Communication |
| T1 | RS485(Modbus RTU) |
| T2 | RS485 + Ethernet |
| Code | Power supply |
|---|---|
| V1 | AC 220V(85~265V) |
| V2 | DC 24V |
| V3 | Double power redundancy (AC + DC automatic switch) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us