Pressure autocheckerClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-AU-100

Pressure autochecker

Pressure autovalidation devices, pressure autovalidation devices, covering vacuum to high pressure

01

Classification: Pressure autovalidation device

02

Check configuration based on field work

⁇ Return pressure autovalidation device classification

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-AU-100

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-AU-100
Operating principleAuto-pressure + smart fine-modulated valve closed ring pressure, compared to Standard pressurer, self-capturing, interpretation and production of calibration/correction logs for the upper machine software
Pressure rangeAir pressure: -0.095–+6.0MPa (clean air/nitrogen gas); hydraulic pressure: 0–60MPa (available 70MPa, Specify when ordering)
Pressure control stabilityVolatility ≤0.005%FS / 10s (after steady pressure); automatic micro-movement to check point without manual pressurization
Pressure generation methodInternal oil-free piston gas pump (pressure type) / electric piston pump (prime pressure type) + servation microlytic valves; increase rate can be set
Verification point managementAutomatically generate a control point sequence (≥5/11 point, up - return two-way) by protocol, a point-by-point steady pressure hint, an automatic interpretation of the detected value
Compatible reference instruments0.05 Level / 0.02 Level Digital Pressure Validator (standard); optional 0.02 Pistol Pressurer; user readiness Reference instrument is also directly accessible
Accuracy classDevice combination uncertainty ≤0.05%FS (with 0.05 class reference instrument) / ≤0.02%FS (with 0.02 class)
Instruments under testPressure Transmitter (Gauge pressure / Differential pressure / Absolute pressure), precision pressure sheet, normal pressure table, pressure switch/pressure controller, pressure sensor
Instrument test stationsStandard 2 places; optional 4 / 6 / 10 places (fast plugs, empty valves)
Applicable calibration regulationsJJG 882 Pressure transmitter / JJG 49 bourdon tube General Precision Pressure Sheet/ JJG 52 bourdon tube General Pressure Sheet/ JJG 875 Digital Pressure Sheet/ JJG 544 Pressure Control
Power supplyAC 220V ±10%, 50Hz, whole power ≤1.5kW
Gas supply requirementsPressure-type inner pump, without external source; also external 0.4–0.8MPa clean compressed air speed
Working mediumClean air or nitrogen gas (pressure type); transformer oil / pure water (prime pressure type, oily water separation and filtering)
Communication interfaceRS232 (standard)/ USB / RS485, Ethernet (Optional); support access measurement measurement management system
Software functionalityAutomatically collect reference instrument with tested data, computational error and repetition, automatic certification by protocol, generation of original records and calibration/correction certificates (Word/PDF), support for billing and bar code management (Optional)
Display and controls7 " Industrial touch screen local operation (pressure/pressure/reading), which is also controlled by the upper machine
Safety protectionSuper-pressure automatic discharge, limit stop, hose bursting shield; hydraulic-type oil-contaminated collector
Environmental conditionsTemperature 5–35℃, relative humidity ≤85%RH, no strong vibration and corrosive gases
Overall dimensionsHost 700×500×1100mm (wide × depth × height standard 2 space configuration)
Instrument weightAbout 75kg (pressure type); about 90kg hydraulic type
Applicable standardsJJF 1094 Measuring Instrument Characteristics / JJG 882 / JJG 875 / GB/T 17626 (EMC)
Typical applicationsPeriodic check and calibration of pressure Transmitter, pressure gauge, pressure switches by metering and instrumentation plant, plant and petrochemical equipment workshop
Product featuresEBA instead of hand-shake/hand-push, check efficiency increase 3–5 times; emitter modular configuration, a set of devices covering vacuum to 60MPa; protocol library built in, certificate generation

Product selection

VISCON-AU-100
Pressure range module
CodePressure range module
G1-0.095–+0.6MPa (pressure, Vacuum complex)
G20–6MPa (air pressure)
G30–25MPa (prime pressure)
G40–60MPa (prime pressure)
G50–70MPa (prime pressure, Specify when ordering)
Working medium
CodeWorking medium
M1Clean air (internal pump)
M2Nitrogen (outside gas source)
M3Transformer oil (liquid pressure)
M4Pure water (prime pressure, no-oil scenarios)
Instruments under calibration
CodeInstruments under calibration
O1Pressure Transmitter (Gauge pressure / Differential pressure)
O2Precision/ordinary pressure table
O3Pressure Switch / Pressure controller
O4Multiple types of mixer (full function)
Instrument test stations
CodeInstrument test stations
N12 Workspace (Standard)
N24
N36
N410
Reference instrument configuration
CodeReference instrument configuration
S10.05 Class Digital Pressure Validator
S20.02 Class Digital Pressure Validator
S30.02 Class Pistol pressureometer
S4Host only (Reference instrument custom)
Control Mode
CodeControl Mode
C1Semi-automatic (touch screen pressure + manual interpretation)
C2Full Auto (top control + automatic interpretation)
Software functionality
CodeSoftware functionality
W1Basic collection + certificate generation
W2Certificate + instrument/barcode management
W3Online version (multi-end/database)
Communication interface
CodeCommunication interface
R1RS232 (Standard)
R2USB
R3RS485
R4Ethernet (Optional)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-AU-100 Automatic Pressure Calibration Bench