Smart -way display adjusterClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-DIS-150

Smart -way display adjuster

Smart -way display adjuster, smart -way display adjuster

01

Classification: Smart -way display regulator

02

Check configuration based on field work

⁇ Return Smart Four-Run Displays Categor Classification

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-DIS-150

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-DIS-150
Product functionOne instrument collects and display 4 backway measurements, each with an independent PID operation and output, which corresponds to the integration of 4 single circuit adjuster into a shell 96×96; a small device suitable for surface space tension and concentration of points
Input channels4 road independently and in isolation from one another (isolation voltage 500VAC); 4 road can be fully invested or used only 1–3 road
Input typeRTD Pt100 / Pt1000 / Cu50 / Cu100; thermocouple K / E / J / T / N / S / R / B; direct current 4–20mA / 0–20mA; direct current voltage 1–5V / 0–10V / ±100mV; electrical resistance 0–400Ω
Measurement accuracy±0.2%FS (direct flow signal); RTD ±0.2%FS (Pt100 potable ±0.1℃); thermocouple ±0.2%FS, separate channels cold junction compensation (error ±1℃)
Sample cycle100ms (4 channel aggregate); 16 bit A/D conversion; stand-alone digital filters per channel, level of strength 0–15 available
Loop functionsEvery road is independent. configuration Yes: only display, display + high and low limits alarm, display + PID Reconciliation, display + Transmitter output One of four modes; usable in the same table
PID parameters4 We're going back to our separate homes. P (0.1–9999.9%), I (1–9999s), D (0–9999s); micro-divide line, credit limit, anti-saturation; each circuit can be started separately Auto-tuning
Output ConfigurationMost 4 Road. 4–20mA (loading) ≤500Ω), 4 Places ON/OFF, 4 Proportion of road time (%) PWM, cycle 1–120s;output type specified by turnback
Channel calculationsSupporting inter-channel calculations as virtual item 5 display: A-B margin, average, maximum, minimum, ultra-point statistics; for temperature differential monitoring (entry water temperature difference) and multi-point average control
Display unitStandard Configure 4 Double Lines 4 bits LED Digital tube (upline per group) PV Down row. SV, switchable display MV); one for each group 21 (a) Segments of light poles; optional 5 Inch colour screen, four partitions side by side Display Numerical and trend curves
Function Alarm2–4 group alarm (ceiling, floor, high and low limits, deviation, block, over range); relay output 4 road or 8 road (250VAC/2A), can be Alarm Configuration at any one of the circuits
Manual / automatic changeoverManual / automatic no-disturb transition per circuit; directly set output percentages on manual and toggle instant output maintained
Communication interfaceRS485 (Modbus RTU from station) standard; optional Ethernet or USB interface 4 SV, PID parameters and Alarm status
Power supplyAC 85–265V (50/60Hz), power ≤8VA; optional DC 24V power supply
Enclosure and protectionDisk assembly 96×96mm, front plate protection IP65, back end IP20; plug-in endpoint, four-way endpoint partition
Panel cutout dimensions92 × 92mm (wide × high), insertion depth ≤110mm
Instrument weight0.6kg
Applicable standardsJB/T 8214 (industrial process control regulator) / GB/T 17626 (EMC) / Reference JJG 617 (digital temperature indicator regulator Verification regulation)
Typical applicationsSmall heat exchange units, hot and wet rooms, multi-area temperature control in test boxes, multi-part cartridges in retrospect machines, coating of dry threads, water treatment plus adjustments pH multiple-routing controls
Product features4 return route, with approximately three-quarters reduction in desktop occupancy, and simplified connection and spare parts; back-to-back electrical separation, with no impact on the rest of the circuits due to sensor failure; Channel calculations saves a thermometer; each circuit output pattern can be different, with a current valve and solid-state relay inside it.

Product selection

VISCON-DIS-150
Input type
CodeInput type
I1RTD Pt100 / Cu50
I2Thermocouple K/E/J/T
I3Thermocouple S/R/B
I44~20mA / 1~5V
I5Almighty input (total signal, Standard)
Measuring span
CodeMeasuring span
A1-200~+600℃
A20~+1300℃
A30~+1800℃
A4-0.1–0–60MPa (with Transmitter)
A50–9999 General Engineering Unit
A6Individual circuits are assigned (Specify when ordering)
Loop functions
CodeLoop functions
C14 display + Alarm
C24 return road display + 4 PID reconciliation Standard
C32 Road PID + 2 Road only Display
C44 Return + Channel calculations (margin / average / minimum)
Output Type
CodeOutput Type
O14 Road 4–20mA
O24 ON/OFF (band Hysteresis)
O32 Road 4–20mA + 2
O44 road time ratio (PWM, cycle available)
Display configuration
CodeDisplay configuration
D14 double row 4 LED (Standard)
D24 double row LED + 4 21 sector light column
D35 inch colour screen four partitions (digit + trend)
Alarms and relays
CodeAlarms and relays
P14 path relay (250VAC/2A)
P28 path relay (250VAC/2A)
P38 repeater + block / Super Range / Sensor short circuit protection
Communication interface
CodeCommunication interface
T1RS485(Modbus RTU)
T2RS485 + Ethernet
T3RS485 + USB (U disc export record)
Power supply
CodePower supply
V1AC 220V(85~265V)
V2DC 24V
V3Double power (AC + DC automatic switch)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-DIS-150 Intelligent 4-Loop Indicator / Controller