Transmitters, current input detection end barriersClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
VISCON-ISO-200
Transmitters, current input detection end barriers
Transmitters, current input detection end barriers, transmitter current detection end barriers
01
Classification: Transmissor, current input detection end separation fence
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | VISCON-ISO-200 |
|---|---|
| Product function | Yes. hazardous area Second-line/ three-wire transmitter Provision intrinsically safe The power supply, and at the same time... transmitter Output 4–20mA Isolation, conversion. safe area standard Signals, for DCS, PLC, recorder collection; also used as a pure current input fence (without distribution) |
| Explosion protection type | Intrinsic safety associated equipment [Ex ia] II C; accessible 0, 1, 2 II A/II B/II C explosive gas environment Intrinsically safe type Transmitter |
| Channel configuration | Standard one input, one output (1 channel); optional two inputs, two outputs 2 channel is isolated and distributed separately |
| Input signal | 4–20mA (2-wire transmitter with electricity); 4–20mA (three-wire / four-wire transmitter without electricity); 0– 20mA / 4–20mA pure current input; input impedance ≤50Ω without electricity distribution) |
| Transmitter excitation | Intrinsically safe distribution voltage DC 18V (aerial) distribution current limit ≤25mA; short-circuit limit protection allowing long-term short-circuits to remain intact |
| Output signal | 4–20mA (load ≤500Ω, standard); optional 1–5V (load ≥250kΩ), 0–10V; output Optional positive/verse effect |
| HART pass-through | Support HART for two-way transparent transmission, with Safe area Hazardous area Transmitter Configuration, Range adjustments and diagnostics without the need to cover the site |
| Conversion accuracy | ±0.1%FS (23±2℃); temperature drift ≤0.015%FS/℃; all-temperature -20–+60℃ ≤±0.3%FS |
| Response time | ≤50ms (10%–90% Step change) |
| Open-circuit protection | Enter the output by default for spilling (≥22mA) or spilling (≤3.6mA); output Alarm contact (Optional) |
| Isolation performance | Three-way isolation between input, output, and power. Isolation: 1500 V AC for 1 min. Insulation resistance: ≥100 MΩ at 500 V DC. Common-mode rejection: ≥120 dB. |
| Intrinsic safety parameters | Um=250VAC/DC; Uo=26.0V, Io=93mA, Po=0.60W; Co=0.09μF, Lo=2.4mH (II C); II B Environment Co=0.65μF, Lo=8.0mH |
| Power supply | DC 20–35V (valid 24V); single channel ≤1.8W (allocation full load), dual channel ≤3.2W; reverse Overvoltage protection |
| Mounting | Snap-on mounting to a standard 35 mm DIN rail. Width: 12.5 mm for one channel or 18 mm for two channels. |
| Wiring | Plugged screws (2.5mm2); Hazardous area ender blue mark and set side by side with other circuits |
| Operating environment | Temperature -20–+60℃, relative humidity ≤95%RH (Non-condensing) |
| Overall dimensions | Single channel 12.5 × 110 × 118mm; double channel 18 × 110 × 118mm |
| Instrument weight | About 0.12kg (single channel) |
| Applicable standards | GB 3836.1 / GB 3836.4 / GB 3836.15 (intrinsically safe system)/ GB/T 17626 (EMC)/ IEC 61000-6-2 |
| Certification requirements | Explosion protection certificate; intrinsically safe circuit to account for cable parameters based on GB 3836.15 |
| Typical applications | Pressures in installations such as oil, chemical, gas, coal, differential pressure, level, temperature integration transmitter and DCS/PLC; replacement of the traditional Zina security fence without the need for a dedicated main line |
| Product features | Test end-band distribution, one fence completes the power and signal separation; HART transparent transmission, smart transmitter configuration is exempt from the scene; short-circuit traffic protection is protected, the on-site connection is not damaged; no dedicated area (separated structure) is required, and the inside cabinet is simple; and the line is mixed with ISO-100/150 |
Product selection
VISCON-ISO-200| Code | Number of channels |
|---|---|
| C1 | One input, one output (1 channel) |
| C2 | Two inputs, two outputs (2 channel, stand alone) |
| Code | Input Method |
|---|---|
| I1 | Second-line Transmitter (with electricity) |
| I2 | Three-wire / Four-wire Transmitter (without electricity) |
| I3 | Pure current input 4–20mA (without electricity distribution) |
| I4 | / Without electricity toggle |
| Code | Output signal |
|---|---|
| O1 | 4–20mA (Standard) |
| O2 | 1~5V |
| O3 | 0~10V |
| O4 | 4–20mA + Alarm Touch |
| Code | HART functionality |
|---|---|
| H1 | HART |
| H2 | HART transparent transmission (Standard) |
| H3 | H2 + HART quarantine zoom in |
| Code | Accuracy class |
|---|---|
| A1 | ±0.1%FS (Standard) |
| A2 | ±0.2%FS (Economy type) |
| A3 | ±0.05%FS (high Accuracy, order) |
| Code | Explosion protection marking |
|---|---|
| E1 | [Ex ia] II C (Standard) |
| E2 | [Ex ia] II B |
| E3 | [Ex ib] II C |
| Code | Open-circuit alarm |
|---|---|
| F1 | Spill (≥22mA) |
| F2 | Spills (≤3.6mA) |
| F3 | Keep final value |
| F4 | Up/down programmable |
| Code | Power supply |
|---|---|
| P1 | Independent 24VDC electricity supply |
| P2 | DIN rail bus power supply (power distribution module) |
| P3 | Redundant 24VDC double power supply |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us