12V/45mA driver, switch output separation fenceClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-ISO-250

12V/45mA driver, switch output separation fence

12V/45mA driver, switch output fence, 12V/45mA switch output fence

01

Classification: 12V/45mA driver, switch output fence

02

Check configuration based on field work

⁇ Return 12V/45mA driver, switch output fence classification

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-ISO-250

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-ISO-250
Product functionTake it. safe area Switches to the control system (relays contact points, transistor-collector circuits, logical level) signal passage intrinsic safety isolation After, by 12VDC / 45mA It's... Intrinsically safe Power Drive Hazardous area Electromagnetic valves, sound light. Alarm Switch loads such as switches, small relays, etc.
Explosion protection typeIntrinsic safety Type-associated equipment [T] Ex ia] II C;outside accessable 0 Region, 1 Region, 2 Sector II A/II B/II C Type of environment Intrinsically safe type Switch Load
Channel configurationStandard one input, one output (1 Channels; optional two inputs, two outputs (2 Independent separation of passages; Optional One input, two outputs (Same signal drive two-way loads)
Input signalDry contact (voltage-free contact), wet contact (DC 24V, input current ≤5mA), transistor central pole opening (NPN/PNP optional), logical level (0–5V/0–24V); input and output electrical separation
Input thresholdHigh level ≥4.5V (or touch closed), low level ≤1.5V (or touch disconnected); input current ≤5mA; with a shake-proof filter (available 0–5s)
Output driveIntrinsically safe type switch output, 12VDC / 45mA (gap); direct driver intrinsically safe electromagnetic valve, acoustic alarm device, intrinsically safe relay wire; output source type (sourcing) driven
Output protectionOutput short-circuit (≤55mA) and passover protection; Reverse polarity protection; sensory load belt renewal diode (inline)
Response time≤10ms (Input change to output set); with programmable delay 0–5s (for time series of lock actions)
Isolation performanceThree-way isolation between input, output, and power. Isolation: 1500 V AC for 1 min. Insulation resistance: ≥100 MΩ at 500 V DC. Common-mode rejection: ≥120 dB.
Intrinsic safety parametersUm=250VAC/DC; Uo=15.4V, Io=52mA, Po=0.20W; Co=2.4μF, Lo=2.0mH (II C); II B Environment Co=10μF, Lo=8.0mH
Output indicatorPanel LED channel-by-channel indicator output status (conductor/disconnect) for lockback circuit failure determination
Power supplyDC 20–35V (Quota 24V); single channel power ≤0.8W, double channel ≤1.4W; with reverse Overvoltage protection
MountingSnap-on mounting to a standard 35 mm DIN rail. Width: 12.5 mm for one channel or 18 mm for two channels.
WiringPlugged screws (2.5mm2); Hazardous area ender blue identification
Operating environmentTemperature -20–+60℃, relative humidity ≤95%RH (Non-condensing)
Overall dimensionsSingle channel 12.5 × 110 × 118mm; double channel 18 × 110 × 118mm
Instrument weightAbout 0.12kg (single channel)
Applicable standardsGB 3836.1 / GB 3836.4 / GB 3836.15 (intrinsically safe system)/ GB/T 17626 (EMC)/ IEC 61000-6-2
Certification requirementsExplosion protection certificate for access to national blast detection facilities; GB 3836.15 accounting Lo for driving sensor load matches the load perception
Typical applicationsSwitch output circuits for locking systems in chemical, petrochemical, oil and gas installations: hazardous area intrinsically safe electromagnetic valves, aerodynamic valve pioneer valves, acoustic alarm devices, blastproof relays; SIS/ESD separation of the system from the on-site execution element
Product features12V/45mA intrinsically safe drive, directly driving most intrinsically safe electromagnetic valves and acoustic devices to save intermediate relays; input compatibility dry contact / wet contact / transistor/logical level, compatible with various control systems; short-circuit limit protection to prevent intrinsically safe circuit from being ignited; panel LED visual Display action status, fast-tracking of chain failure sequences

Product selection

VISCON-ISO-250
Number of channels
CodeNumber of channels
C1One input, one output (1 channel)
C2Two inputs, two outputs (2 channel, stand alone)
C3One input, two outputs (1 signal drive 2 road load)
Input type
CodeInput type
I1Dry contact (Voltage-free contact)
I2Wet contact DC 24V
I3Transistor ICD open circuit (NPN)
I4Logical level 0–5V / 0–24V
Output drive
CodeOutput drive
O112VDC / 45mA (Standard)
O212VDC / 45mA source + short-circuit protection
O324VDC / 30mA (order)
Switching action
CodeSwitching action
F1Normally open (output with input guide)
F2Normally closed (reverse output)
F3Normally open / Normally closed programmable
Delay and Filter
CodeDelay and Filter
D1No delay (≤10ms response)
D2Enter tremors 0–5s available
D3D2 + output timed 0–5s available
Explosion protection marking
CodeExplosion protection marking
E1[Ex ia] II C (Standard)
E2[Ex ia] II B
E3[Ex ib] II C
Indication and diagnostics
CodeIndication and diagnostics
L1No instructions
L2Channel-by-channel output LED indication (Standard)
L3L2 + output failure point
Power supply
CodePower supply
P1Independent 24VDC electricity supply
P2DIN rail bus power supply (power distribution module)
P3Redundant 24VDC double power supply

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-ISO-250 Switch Output Isolator, 12V / 45mA Ex ia Drive