Pressure (vacuum) calibrationClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
VISCON-PC-100
Pressure (vacuum) calibration
Pressure (vacuum) calibration, pressure/vacuum calibration
01
Classification: Pressure (vacuum) calibration
02
Check configuration based on field work
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | VISCON-PC-100 |
|---|---|
| Operating principle | Manual piston pump Vacuum, pressure of cavity measured by high Accuracy pressure sensitivity component (Diffused silicon / Monocrystalline silicon) and numerically Display, with fine-tune valves and excretion valves accurately stabilizing to the point of detection, direct on-site verification of the inspected pressure sheet, pressure Transmitter, pressure switch |
| Structure | Hand pumps (pressure/pump Vacuum double trip), pressure cavities, fine-modified valves, excise pressure valves, precise digital pressure sheets, measured interfaces, electrometric interfaces, all integrated into portable aircraft boxes Integral |
| Pressure generation method | Manual pressurization: piston pump presses continuously to target value, fine-modified valves, slow release of depressor valves; manual; pump vacuum: switch to re-suction to -95kPa (Gauge pressure) |
| Pressure range | Vacuum Type -95kPa–0;pressure type -95kPa–0–2.5MPa (optional 0–4MPa); hydraulic type 0–60MPa (The cups of oil, optional 0–100MPa) |
| Calibration range | Vacuum pressure composite table, pressure table, pressure transmitter and pressure switch that covers -0.1–0–2.5MPa; hydraulic type 0–60MPa high pressure table |
| Accuracy class | 0.05%FS (standard), 0.1%FS, 0.02%FS (High-accuracy type, only air pressure/ Vacuum Range) |
| Pressure stability | 1min internal drift ≤0.05%FS; voltage 5min pressure ≤0.1%FS (hythmic and sealed under satisfactory conditions) |
| Vacuum level | Limits vacuum ≤5kPa absolute pressure (About -95kPa gauge pressure); vacuum Rate ≤30s From constant pressure to -90kPa |
| Display type | 5 " Colour TFT LCD, double row display (Main value pressure + by-product/percentage/peak); backlight, visible in the sun |
| Display units | kPa, MPa, bar, psi, kgf/cm2, mmHg, mmH2O, inHg Wait. 10 Seeds, one key switch |
| Electrical signal measurement | Direct current 0–25.000mA (accuracy 0.05%RD+0.01%FS); built-in DC 24V Loop power supply (with short-circuit protection), which simultaneously provides power to Transmitter and reads output currents |
| Calibration functions | Zero dot decorating, peak/valve maintenance, pressure check leak (pressure metering and pressure reduction rate), pressure switch up/down switch automatic capture and switch calculation, Transmitter 4 / 5 Linearity error automatic calculation |
| Working medium | Air pressure/ vacuum: Clean air or nitrogen gas (prohibited oil); hydraulic type: transformer oil or pure water (optional 40# hydraulic fluid) |
| Wetted materials | 316L stainless steel Console and cavity standard); seals NBR NBR (standard), optional FKM FKM or perfluoroethers FFKM (Corrosion resistant Media) |
| Process connection | Standard Table interface M20×1.5 female thread + Checked interfaces M20×1.5 female thread (each) 1 (a) Roads; optional G½, G¼, 1/4NPT or DN16 Quick lock-in, matchable to switch-to-back group |
| Data management | Internal storage ≥1000 group check record (with time stamp, range, error) supported U dispatch CSV/Excel optional bluetooth upload phone APP |
| Communication interface | RS232 / USB (standard); optional RS485, Bluetooth 5.0 |
| Power supply | Chargeable lithium batteries 7.4V / 5200mAh, working continuously ≥15h; equipped with AC 220V adapter to support side-loading |
| Operating environment | Temperature 0–50℃, relative humidity ≤90%RH; storage temperature -20–+70℃; no powerful vibration and corrosive gases |
| Ingress protection | IP54 (standard); optional IP65 |
| Overall dimensions | About 260 × 150 × 78mm (including handbands and connections, without hoses) |
| Instrument weight | About 1.6kg (pressure/ vacuum type); about 2.4kg (oiled cups) |
| Applicable standards | JJG 875 Digital Pressure Sheets/ JJG 52 "Flexible Widget General Pressure Sheet, Pressure" vacuum Table and vacuum Table / JJG 49 "Flexible Widget Precision Pressure Sheets and vacuum Table / JJG 882 "Pressure" transmitter 》/ GB/T 17626 (EMC) |
| Typical applications | On-site verification of power plants, petrochemicals, metallurgicals, water treatment, etc. Vacuum gauge, pressure Vacuum table, pressure Transmitter, pressure switch online; rapid comparison of mass pressure tables in instrument workshops; field and high-altitude operations with no external gas, no electricity |
| Product features | A device combines pressure construction and measurement with no additional pressure source; vacuum with positive pressure double-direction construction, a cover -95kPa–2.5MPa complex range; fine-tune valves, single point stabilization time ≤30s; inner 24V Loop power supply with current measurement, Transmitter check one connection completed; full Chinese menu, with gloves to operate |
Product selection
VISCON-PC-100| Code | Pressure generation type |
|---|---|
| V1 | Vacuum (-95kPa–0) |
| V2 | Pressure type (-95kPa–0–2.5MPa, Vacuum positive-pressure dual function) |
| V3 | Hydraulic type (0–60MPa) |
| V4 | Pressure + hydraulic double configuration |
| Code | Pressure range |
|---|---|
| R1 | -95–0kPa (Vacuum) |
| R2 | -95kPa~0~600kPa |
| R3 | -95kPa~0~1.6MPa |
| R4 | -95kPa–0–2.5MPa (Standard) |
| R5 | -95kPa~0~4MPa |
| R6 | 0–60MPa (prime pressure) |
| R7 | 0–100MPa (prime pressure, order) |
| Code | Accuracy class |
|---|---|
| A1 | 0.02%FS (High-accuracy type) |
| A2 | 0.05%FS (Standard) |
| A3 | 0.1%FS |
| Code | Function Configuration |
|---|---|
| F1 | Base type (pressure + pressure measurement) |
| F2 | Pressure + 4–20mA electron (include 24V Loop power supply) |
| F3 | F2 + pressure switch test |
| F4 | F3 + Verify Data Records and Export |
| Code | Process connection |
|---|---|
| T1 | M20×1.5 Female thread (Standard, two-way) |
| T2 | G½ Female thread |
| T3 | 1/4NPT Female thread |
| T4 | DN16 fast lock-in |
| Code | Seals and wetted materials |
|---|---|
| M1 | NBR Sealed + 316L interface (Standard, air/nitrogen) |
| M2 | FKM sealed + 316L (temperature and oil) |
| M3 | FFKM Pfluorinated Ether + 316L (Forced corrosive medium) |
| M4 | Hydraulic type (oil cup + 316L + FKM) |
| Code | Communication and storage |
|---|---|
| C1 | RS232 + USB (Standard) |
| C2 | C1 + RS485 |
| C3 | C1 + Bluetooth 5.0 (cell phone APP) |
| Code | Power supply and protection |
|---|---|
| B1 | Lithium Battery + AC adaptor, IP54 |
| B2 | Lithium Battery + AC adaptor, IP65 |
| B3 | Large capacity batteries (continuation ≥25h), IP65 |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us