Smart server control PID regulatorClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-PID-100

Smart server control PID regulator

Smart server control PID regulator, smart server control PID regulator

01

Classification: Smart server control PID regulator

02

Check configuration based on field work

⁇ Return smart server control PID regulator classification

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-PID-100

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-PID-100
Product functionReceiving temperature, pressure, flow, level Wait for the signal to be measured. PID A three-state signal-driven electric server to output positive/reverse/cut after operation Actuator (Electro) Control valve, servers) to achieve closed loops; with valve feedback closed, output and valve control double, avoiding saturation and overstretch
Input configuration1 road measurement input (gift input) + 1 outsider input (4–20mA); measurement and external margin operation
Input type4–20mA, 0–20mA, 1–5V, 0–10V, mV Electrical resistance. 0–400Ω, RTD Pt100 / Cu50, thermocouple K / E / J / T / N / S / B
Measurement accuracy±0.2%FS (direct signal); RTD ±0.3%FS; thermocouple ±0.3%FS (including cold junction compensation error ±1℃)
Sample cycle100ms (0.1s); 16 bit A/D conversion, measured digital filter strength 0–15 level available
PID parametersScale band P 0.1–9999.9%, score time I 1–9999s, calibration time D 0–9999s; calibration line, fraction limit, antisaturation, output change rate limits can be set
Control cycle0.1–100s is available, matching the travel time of the server Actuator; the server default calculation of the output pulse by valve feedback position
Servo outputInverting / Inverting dual relay output (AC 220V / 1A retardation) or solid state relay output; output with minimum pulse width 0.1s, with dead zone 0.5–5.0% inhibiting frequent movements
Valve feedbackSupports 1k–10kΩ or 4–20mA valve feedback; display accuracy ±0.5%FS; automatically cut to time control when feedback breaks Alarm
Auto-tuningRelay feedback method (AT) auto-tuning, which automatically extracts critical oscillation cycles and critical gain and gives PID recommended value; supported manual fixation and parameter copying
Manual / automatic changeoverManual/automatic two-way no-disturbing switch; manual increase or decrease valve level, toggle instant output to maintain current valve level, without impacting process
Display unitTwo rows 4 bit LED digital tube (upline measurement PV, downline set SV, toggle display output MV); double light column indicator output and valve level
Function Alarm2–4 group alarm configurable cap, floor, high and low limits, deviation, block, over range; relay capacity 250VAC/2A
Transmitter outputOptional 1 road 4–20mA transmitter output (following measurements or output values) for recorders or DCS collection
Communication interfaceRS485 (Modbus RTU from station); optional Ethernet; remote setting SV, reading and writing PID parameter and state surveillance support
Power supplyAC 85–265V (50/60Hz), power ≤5VA; optional DC 24V power supply
Enclosure and protectionDisk assembly 96×96mm, front plate protection IP65, back end IP20; extraction connection end
Panel cutout dimensions92 × 92mm (wide × high), insertion depth ≤100mm
Instrument weight0.5kg
Applicable standardsJB/T 8214 (industrial process control regulator)/ GB/T 17626 (EMC)/ GB/T 34037 / Reference JJG 617 (digital temperature indicator regulator)
Typical applicationsElectric Control valve Control of steam, heat, cooling water flow; servo valve adjustment for heat processors, ovens, kilns; closed loops requiring valve feedback, such as heat exchange stations, boiler packs, air conditioners, etc.
Product featuresServo output makes a closed loop with valve feedback, which is immediately identifiable when the valve card is thick or the feedback is out; dead zone Adjustable, which is reduced by Actuator, which is a frequent micromovement, which extends the useful life; Auto-tuning, which is based on the physical characteristics of the object and does not have to be based on experience; automatic hand-to-hand undisturbed switch, which is delivered without impact

Product selection

VISCON-PID-100
Input type
CodeInput type
I14~20mA
I20~10V / 1~5V
I3RTD Pt100 / Cu50
I4Thermocouple K/E/J/T
I5Almighty input (total signal, Standard)
Measuring span
CodeMeasuring span
A1-200~+600℃
A20~+1300℃
A3-0.1–0–60MPa (with Transmitter)
A40–9999 General Engineering Unit
A5Special Range (Specify when ordering)
Servo output type
CodeServo output type
O1Relay reverses (AC 220V/1A, Standard)
O2Solid state relays are inverted (no contact, long life)
O34–20mA simulation (with server amplifiers)
O4Triple-server power drive (order)
Valve feedback
CodeValve feedback
F11k–10kΩ (Standard)
F24–20mA valve feedback
F3No feedback (scheduled control)
Control Mode
CodeControl Mode
C1One turn PID (Standard)
C2PID + external margin control
C3PID + string control
C4Process segment control (≤30, heating/preservation/removation)
Display configuration
CodeDisplay configuration
D1Double row 4 LED (PV + SV)
D2Double row LED + Double-light column (output / valve)
D3LED + 5 inch colour screen curve Display
Communication and retransmission
CodeCommunication and retransmission
T1RS485(Modbus RTU)
T2RS485 + 1 4–20mA Transmitter output
T3RS485 + Ethernet
Alarms and protection
CodeAlarms and protection
P1Group 2 Alarm
P2Group 4 Alarm
P3Group 4 alarm + Disruption / Super Range / Valve Overtime Protection

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-PID-100 Intelligent PID Controller for Servo / Motorized Valve Actuators