Process signal simulationClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-SC-150

Process signal simulation

Process signal simulation calibration, process signal calibration

01

Classification: Process signal simulation

02

Check configuration based on field work

⁇ Return process signal simulations category

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-SC-150

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-SC-150
Operating principleDouble channel D/A and A/D circuit, one channel output Standard process signal (electricity/voltage/resistance/frequency/temperature) and the other channel Simultaneous measurement exported from the inspected device, which constitutes closed ring verification; interior Loop power supply power supply Transmitter to achieve integrated field verification
Channel configurationTwo channels capable of simultaneous output and measurement (output channel 1 + survey channel 1); two channels of electrical separation isolation voltage 500V
Signal outputDirect current 0–25.000mA, direct current 0–12.000V, mvolt -10–100.000mV, resistance 0–4000.0Ω, frequency 0–10.000kHz (square wave/ pulse, range 5–24V available)
Signal measurementDirect current 0–25.000mA, direct current 0–30.000V, mv -10–100.000mV, electrical resistance 0–4000.0Ω, frequency 0–50.00kHz, break (≤200Ω JO)
Temperature SimulationRTD:Pt100/Pt1000/Cu50/Cu100, 2/3/ 4 lines; -200–850℃; TC:K/E/J/T/N/S/R/B, -20 0–1800℃; inline Cold junction compensation
Basic AccuracyElectricity/voltage: ± (0.02%RD+2μA / +0.2mV); electrical resistance: ±0.05%RD; frequency: ±0.01%RD; temperature: ±0.3℃ (TC)/ ±0.1℃ (RTD)
Output modeFixed values, steps (automatic/manual, long steps and presence), slopes (slashable and time), procedure segments (≤20, 0–100% % output)
Loop power supplyInternal DC 24V / 30mA loop power supply (with short circuits and reverse polarity protection); with HART barrier interface, which can be used in conjunction with HART handheld
HART communicationOptional HART modem module to support reading transmitter PV / range /bit and can mA value superimpose HART numeric volume comparison (used for backtracking)
Calculation functionsError reading (fixing value deviation from inspected value and percentage), range conversion, square root/linear flow conversion, valve opening (%) conversion, unit conversion
Data managementInternal storage ≥2000 group (with time stamp), USB export CSV/Excel; continuous record support (sampling interval 1s–60s)
Display type4.3 inch colour TFT, 3rd sector Display (output value / measured value / deviation), with back light; graphical menu
Communication interfaceUSB (standard)/ RS232 (standard); optional Bluetooth 5.0 (connecting mobile phone APP or on-board)
Power supplyChargeable lithium batteries 7.4V / 4000mAh, working continuously ≥16h; AC 220V adapter charge to support side-loading
Operating environmentTemperature -10–+50℃, relative humidity ≤90%RH (Non-condensing)
Ingress protectionIP54 (standard); optional IP65
Overall dimensions210 × 105 × 48mm
Instrument weightAbout 0.85kg (including batteries)
Applicable standardsJJG 882 Pressure transmitter / JJG 617 Digital temperature indicator adjuster/ JJF 1472 Process instrument calibration instruction/ GB/T 17626 (EMC)
Typical applicationsDifferential pressure / Temperature/ level transmitter output verification, control valve and actuator opening command, variable frequency drive debugging with PLC analogue channel, Pulse flow computer and calculator verification, and imitation of signal before metering back to transport
Product featuresOne-time coverage mA, V, mV, Ω, Hz 6 large temperature signals, replacing the traditional multiple single function calibration; two-channel isolation, one side to the other transmitter adding a signal while reading back the output;inline HART Resistor with Loop power supply, no additional equipment is required on site; the program segment output replicable process curves to facilitate locking with Alarm Authentication

Product selection

VISCON-SC-150
Channel configuration
CodeChannel configuration
C1Single channel (output or measurement)
C2Double-channel isolation (output + measurements, Standard)
C3Double channel + Loop power supply
Signal range
CodeSignal range
S14–20mA / 0–10V (basic)
S2S1 + mV + electrical resistance
S3S2 + frequency/ Pulse
S4S3 + RTD Thermocouple (full functionality)
Accuracy class
CodeAccuracy class
A10.02%RD (Standard)
A20.05%RD
A30.01%RD (high Accuracy, order)
HART functionality
CodeHART functionality
H1HART
H2With HART interceptor interface
H3Inline HART modem (readable Transmitter Configuration)
Output mode
CodeOutput mode
M1Fixed Output
M2M1 + step output
M3M2 + ramp output
M4M3 + process segment (≤20)
Data and records
CodeData and records
D1No storage
D2Storage 2000 group + USB Export
D3D2 + Continuous records (1–60s interval)
Communication interface
CodeCommunication interface
R1USB
R2USB + RS232 (Standard)
R3R2 + Bluetooth 5.0
Protection and power supply
CodeProtection and power supply
P1IP54 + lithium batteries (≥16h)
P2IP65 + lithium batteries (≥16h)
P3IP65 + large capacity batteries (≥30h)

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-SC-150 Process Signal Calibrator / Simulator