Handheld Multifunctional ValidatorClick on the picture to zoom in.

PRODUCT SPECIFICATIONS

VISCON-SC-250

Handheld Multifunctional Validator

Handheld multifunctional calibration, handheld multifunctional calibration

01

Classification: Handheld multifunctional calibration

02

Check configuration based on field work

⁇ Return Handheld Multifunctional Validator Classification

TECHNICAL SPECIFICATIONS

Technical specifications

VISCON-SC-250

Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.

View selection tables ↓
ModelVISCON-SC-250
Operating principleUse low-capacity SoC + High accuracy 16 bits D/A, A/D Circuit, convert set value to standard Process signal output, or collect the signal from the inspected device and display;through Bluetooth and mobile phones APP Linked by cell phone completion of parameter settings, logs and reports, instrumentation only maintains the required buttons and Display
Structural characteristicsHand-held single-handed, size close to mobile phone; aluminium alloy middle frame + silicone, interface and battery silo concentrated at one end; no external dispersed heat hole, loaded into tool bags
Signal output4–20.000mA, 0–10.000V, -10–100.00mV, 0–4000.0Ω, 0–10.00 0kHz; temperature imitation Pt100/Pt1000/Cu50, K/E/J/T Thermocouple
Signal measurement4–20.000mA, 0–30.000V, -10–100.00mV, 0–4000.0Ω, 0–50.00 kHz, break (≤200Ω)
Basic AccuracyElectricity/voltage ± (0.05%RD+3μA / +0.3mV); electrical resistance ±0.1%RD;frequency ±0.05%RD;the temperature ±0.5℃ (TC)/ ±0.2℃ (RTD)
Loop power supplyInternal DC 24V / 25mA Loop power supply (with short-circuit protection) to provide Two-wire Transmitter power supply and read current at the same time
Output modeFixed value, step (automatic/manual), 0–100% percentage output, fine-tune (bold/blank)
Calibration functionsTransmitter 4 error reading, pressure switch break detection (complementing external pressure sources), circuit break-up and polarization, mA interchange with percentage, Range conversion
Display type2.4 High-light liquid crystals in inch (visible under sunlight), double row Display (set/real measured value); white backlight
Mobile app connectivityBluetooth 5.0 connect mobile phone APP (Android/iOS): remote setting, curve surveillance, record storage, on-site production of validation reports (which can be exported PDF/Excel and shared)
Data managementIn-house storage 500 group; cell phones are open-ended to support filing by device desk, photo association and 2D tag
Method of operationFive-key operation (power/toggle/ increase/decrease/ confirm), one hand to complete all typical actions; support one key to zero and one 4mA/20mA output
Power supplyChargeable lithium batteries 3.7V / 2000mAh, working continuously ≥30h (output 4–20mA); USB-C chargeable with cell phones
Operating environmentTemperature -10–+50℃, relative humidity ≤90%RH (Non-condensing)
Ingress protectionIP54 (standard); optional IP67 (with seals)
Overall dimensions130 × 68 × 28mm
Instrument weightAbout 0.28kg (including batteries)
Applicable standardsJJF 1472 Process instrument calibration norms/ JJG 882 Pressure transmitter / JJG 617 Digital temperature indicator adjuster
Typical applicationsOn-site instrument check and quick screening, transmitter daily comparison with control valve, PLC/DCS light quantitative verification of dispersed sites such as simulation, heating and water treatment before delivery; suitable for use at portable, frequent transfer sites
Product featuresThe size and weight is about the conventional hand-held calibration. 1/3, can be carried on a permanent basis; 30h Continue. No charge for a trip; Bluetooth. + Cell phone. APP Hand over the records and reports to the cell phone, without writing and pen; one key. 4mA/20mA Output, retracing circuit lines, polarity backsliding the fastest; low price and maintenance cost, suitable for class batching

Product selection

VISCON-SC-250
Function Configuration
CodeFunction Configuration
F1mA/V output and measurement
F2F1 + mV /temporary/frequency
F3F2 + Temperature Simulation (RTD/TC, Standard)
F4F3 + Loop power supply
Accuracy class
CodeAccuracy class
A10.05%RD (Standard)
A20.1%RD (Economy type)
A30.02%RD (high Accuracy, order)
Temperature scale
CodeTemperature scale
T1No temperature function
T2Pt100 / Pt1000 / Cu50
T3T2 + K/E/J/T Thermocouple
Mobile app connectivity
CodeMobile app connectivity
B1No blue teeth.
B2Bluetooth 5.0 + APP (set/curve)
B3B2 + Live Report Export (PDF/Excel)
Data Storage
CodeData Storage
D1Unit 500
D2Local 500 group + phoneend archive
D3D2 + 2D device label
Ingress protection
CodeIngress protection
K1IP54 (Standard)
K2IP67 (seal cover)
Power supply configuration
CodePower supply configuration
P1Lithium batteries (≥30h) + USB-C charge
P2P1 + backup battery
P3P1 + charge base
Accessory configuration
CodeAccessory configuration
S1Standard test line group + condoms
S2S1 + connects to magnets
S3S1 + portable instrument kit

Confirm specifications and ordering options

Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.

Contact us
VISCON-SC-250 Pocket Multi-Function Calibrator