Insertion typeClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
FLUME-US-200
Insertion-Type Ultrasonic Flowmeter
Measures the flow of low-turbidity liquids in DN100–DN3000 pipes using transit-time ultrasonics. The transducers insert through ball valves for installation and servicing while the pipe remains in operation.
01
Nominal pipe size DN100–DN3000
02
Hot-tap installation without shutdown
03
High-temperature version supports fluid temperatures up to +150 °C
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | FLUME-US-200 |
|---|---|
| Nominal pipe size | DN100~DN3000 |
| Measurement principle | Transit-time ultrasonic measurement |
| Transducer | Standard or high-temperature insertion transducer |
| Transducer material | 316 stainless steel / Hastelloy C-276 |
| Pipe material | Dense, acoustically conductive pipe materials such as carbon steel, stainless steel, cast iron, PVC, PE and FRP (fiberglass) |
| Pipe size | DN100~DN3000 |
| Process medium temperature | Standard type: −40 to +90 °C. High-temperature type: −40 to +150 °C. |
| Ambient temperature | Converter: −20 to +60 °C |
| Operating pressure | ≤2.5 MPa, within the pipe pressure rating |
| Accuracy class | 1.0 (0.5–5m/s), optional 0.5 |
| Flow velocity range | 0–32m/s (recommended 0.5–5m/s) |
| Suitable media | Less obfuscated liquids such as water purification, seawater, industrial sewage, acid alkaline, cooling circulation water |
| Output signal | (4~20) mA electric current, pulse, RS485, HART, High and low limits Alarm (total isolation) |
| Display | Instantaneous flow, flow speed, positive and reverse aggregate, Alarm Display |
| Mounting | Plumb openings inserted through ball valves to support pressure openings, uninterruptible production installations, online repair and dismantling |
| Ingress protection | IP65 / IP68 |
| Communication | RS485 (Modbus protocol), HART |
| Explosion protection marking | Ex d IIB T6 Gb |
| Power consumption | ≤15W |
| Power supply | 220V AC 50Hz、24V DC |
Product selection
FLUME-US-200| Code | Nominal size (mm) | Measurement range (m3/h) |
|---|---|---|
| 100 | DN100 | 14.14~282.74 |
| 150 | DN150 | 31.81~636.17 |
| 250 | DN250 | 88.36~1767.15 |
| 400 | DN400 | 226.19~4523.90 |
| 600 | DN600 | 508.94~10178.76 |
| 800 | DN800 | 904.78~18095.57 |
| 1200 | DN1200 | 2035.75~40715.03 |
| 1600 | DN1600 | 3619.11~72382.23 |
| 2500 | DN2500 | 8835.73~176714.59 |
| 125 | DN125 | 22.09~441.78 |
| 200 | DN200 | 56.55~1130.97 |
| 300 | DN300 | 127.23~2544.69 |
| 500 | DN500 | 353.43~7068.58 |
| 700 | DN700 | 692.72~13854.42 |
| 1000 | DN1000 | 1413.72~28274.33 |
| 1400 | DN1400 | 2770.88~55417.68 |
| 2000 | DN2000 | 5654.87~113097.34 |
| 3000 | DN3000 | 12723.45~254468.99 |
| Code | Transducer type |
|---|---|
| S1 | Standard insertion transducer (media ≤90℃) |
| S2 | High temperature insertion transducer (media ≤150℃) |
| Code | Mounting |
|---|---|
| V1 | Installation with pressured hole valves (continuing production) |
| V2 | Set-aside installation (cut-off installation) |
| Code | Compatible pipe materials |
|---|---|
| B1 | Carbon steel / Cast iron |
| B2 | 304 / 316 Stainless steel |
| B3 | PVC / PE / FRP plastic pipes |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.0 |
| E2 | Level 0.5 |
| Code | Signal output |
|---|---|
| F1 | (4~20) mA, pulse, RS485 (Modbus) |
| F2 | (4~20) mA, pulse, RS485 (Modbus), HART |
| Code | Power supply |
|---|---|
| D1 | 220V AC 50Hz |
| D2 | 24V DC |
| Code | Explosion protection marking |
|---|---|
| U1 | It's blastproof. |
| U2 | No blast-proof. |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

