SwitchboardClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-FB-150
Magnetic floats, liquids. Switch.
Magnetic floats liquid meters, switcher configuration. Magnetic float switches, simple and reliable structures
01
Classification: Magnetic Float Liquefied Count
02
Structure form: Switchboard
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-FB-150 |
|---|---|
| Measurement principle | Floating ball follows Level, magnetic trigger Reed switch, switch action |
| Measurement type | Level switches (up/ down Alarm, lock control) |
| Number of setpoints | 1–4 dot (one pole multi-set Optional) |
| Switching accuracy | ±3mm (set point repeat accuracy ±1mm) |
| Medium density | ≥0.6g/cm3 |
| Operating pressure | -0.1–4.0MPa (by Flange / Thread level) |
| Process medium temperature | -40–+120℃ (high-temperature type to +200℃) |
| Float/ Tube material | 316L stainless steel (PTFE covered, Hax Optional) |
| Switch rod specifications | φ22×1.5mm coastless pipe, length 300–2000mm |
| Connection | DN25/DN40 flange / M20×1.5 / G1 / 1/2NPT Thread side or top |
| Switch contact rating | 220VDC / 220VAC, capacity 30VA (Voltage-free dry contact) |
| Contact type | Normally open (NO) / normally closed (NC) optional, single-stabbing (SPDT) |
| Ingress protection | IP65 |
| Explosion protection marking | Ex d II C T6 Gb / Ex ia II C T4 Ga (Optional) |
| Electrical connection | M20×1.5 / 1/2NPT-F Cable seals |
| Applicable standards | JB/T 5525 / HG/T 21584 |
| Suitable media | Water, oils, acids and alkalis; high/low Alarm, pump locks, spill protection |
Product selection
LISEN-FB-150| Code | Number of setpoints |
|---|---|
| N1 | 1 point |
| N2 | 2 point |
| N3 | 3 point |
| N4 | 4 point |
| Code | Switch stem length |
|---|---|
| L1 | 300~800mm |
| L2 | 800~1500mm |
| L3 | 1500~2000mm |
| Code | Float/ Tube material |
|---|---|
| M1 | 316L Stainless steel (Standard) |
| M2 | 316L + PTFE cover |
| M3 | Hastelloy C276 |
| Code | Connection |
|---|---|
| F1 | M20×1.5 Male thread |
| F2 | G1 / 1/2NPT |
| F3 | DN25 Flange |
| F4 | DN40 Flange |
| Code | Mounting |
|---|---|
| S1 | Side-loading (horizontal installation) |
| S2 | Top (vertical installation) |
| S3 | Bottom-up (bottom-up) |
| Code | Contact type |
|---|---|
| C1 | Normally open NO |
| C2 | Normally closed NC |
| C3 | Double-thrower single knife SPDT (convertable) |
| Code | Explosion protection marking |
|---|---|
| X1 | Non-Ex |
| X2 | Flameproof Ex d II C T6 Gb |
| X3 | Intrinsically safe Ex ia II C T4 Ga |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

