MirrorClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-RA-100
Radar position index.
Non-contact radar level measurement with an 80 GHz FMCW lens antenna.
01
Classification: Radar positionometer
02
Structure form: lenses
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-RA-100 |
|---|---|
| Product name | Lens radar level meter |
| Measurement principle | 80 GHz frequency-modulated continuous-wave (FMCW) radar with a lens antenna for transmission and reception |
| Measured medium | Liquids, slurry, solid particles and powders (high dust, steam, showdown) |
| Measurement range | 0~6 m、0~10 m、0~15 m、0~20 m、0~30 m、0~45 m、0~70 m |
| Dead zone | 0.2–0.6 m (Range-dependent) |
| Accuracy class | ±3 mm |
| Repeatability | ±1 mm |
| Resolution | 1 mm |
| Beam angle | ≈4° (periscope focus, beams narrow, jamming strong) |
| Process medium temperature | -40~+200℃ |
| Ambient temperature | -40~+70℃ |
| Operating pressure | -0.1~2.5 MPa |
| Antenna material | PTFE + 316L Stainless steel Flange |
| Process connection | Flange DN50 / DN80 / DN100, thread G1½ |
| Display type | Local LCD showing level, distance, and current. A version without display is optional. |
| Output signal | (4~20)mA、HART、RS485(Modbus) |
| Power supply | Two-wire 24 V DC, with optional four-wire 220 V AC |
| Explosion protection marking | Ex ia IIC T6 (intrinsically safe), Ex d IIC T6 (Flameproof) |
| Ingress protection | IP67 (optional IP68) |
| Electrical connection | M20×1.5 |
| Installation requirements | The antenna is vertically oriented to the surface, avoiding the flow of feed and the blending oars, Flange above the top of the jar to take over |
Product selection
LISEN-RA-100| Code | Range | Dead zone (m) |
|---|---|---|
| 6 | 0~6 m | 0.2 |
| 10 | 0~10 m | 0.2 |
| 15 | 0~15 m | 0.3 |
| 20 | 0~20 m | 0.3 |
| 30 | 0~30 m | 0.4 |
| 45 | 0~45 m | 0.5 |
| 70 | 0~70 m | 0.6 |
| Code | Antenna type |
|---|---|
| A1 | Lens antenna (PTFE) |
| A2 | Lens antenna (PTFE with blow-blowing) |
| Code | Process connection |
|---|---|
| C1 | Flange DN50 |
| C2 | Flange DN80 |
| C3 | Thread G1½ |
| Code | Accuracy class |
|---|---|
| E1 | ±3 mm |
| E2 | ±5 mm |
| Code | Process medium temperature |
|---|---|
| T1 | -40~80℃ |
| T2 | ≤150℃ |
| T3 | ≤200℃ |
| Code | Operating pressure |
|---|---|
| P1 | Constant pressure |
| P2 | 1.6 MPa |
| P3 | 2.5 MPa |
| Code | Output signal |
|---|---|
| F1 | (4~20)mA |
| F2 | (4~20)mA + HART |
| F3 | RS485(Modbus) |
| Code | Power supply |
|---|---|
| D1 | Two-wire 24V DC |
| D2 | Four-wire 220V AC |
| Code | Display type |
|---|---|
| G1 | No display |
| G2 | LCD Local display |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T6 (Intrinsically safe) |
| U2 | Ex d IIC T6 (Flameproof) |
| Code | Ingress protection |
|---|---|
| W1 | IP67 |
| W2 | IP68 |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

