Zero.Click on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-RA-150
Radar position index.
Radar position index, all-way configuration. Non-contact 26 GHz radar positionometer
01
Classification: Radar positionometer
02
Construction: swivel type
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-RA-150 |
|---|---|
| Product name | Adjustable-aiming radar level meter |
| Measurement principle | 26 GHz frequency-modulated continuous-wave (FMCW) radar. The adjustable flange aims the antenna at the material surface. |
| Measured medium | Liquids, slurry, solid particles and powders (slanted flour piles, cone silos) |
| Measurement range | 0~5 m、0~10 m、0~15 m、0~20 m、0~30 m |
| Dead zone | 0.3–0.6 m (Range-dependent) |
| Accuracy class | ±5 mm |
| Repeatability | ±2 mm |
| Resolution | 1 mm |
| Beam angle | ≈8° |
| Antenna aiming adjustment | Sphere flange, horizontal/top-up ±15° Adjustable, which can be applied to the slashed fabric position |
| Process medium temperature | -40~+200℃ |
| Ambient temperature | -40~+70℃ |
| Operating pressure | -0.1~1.6 MPa |
| Antenna material | 316L stainless steel horn antenna with a PTFE seal |
| Process connection | Flange DN80 / DN100, 10,000 |
| Display type | Local LCD showing level, distance, and current. A version without display is optional. |
| Output signal | (4~20)mA、HART、RS485(Modbus) |
| Power supply | Two-wire 24 V DC, with optional four-wire 220 V AC |
| Explosion protection marking | Ex ia IIC T6 (intrinsically safe), Ex d IIC T6 (Flameproof) |
| Ingress protection | IP67 (optional IP68) |
| Electrical connection | M20×1.5 |
| Installation requirements | Flange installed to adjust antenna angles on site to avoid material flow and canister walls |
Product selection
LISEN-RA-150| Code | Range | Dead zone (m) |
|---|---|---|
| 5 | 0~5 m | 0.3 |
| 10 | 0~10 m | 0.3 |
| 15 | 0~15 m | 0.4 |
| 20 | 0~20 m | 0.5 |
| 30 | 0~30 m | 0.6 |
| Code | Antenna type |
|---|---|
| A1 | Adjustable horn antenna |
| A2 | Adjustable horn antenna (blowing) |
| Code | Process connection |
|---|---|
| C1 | Flange DN80 |
| C2 | Flange DN100 |
| C3 | A million-dollar stretcher. |
| Code | Accuracy class |
|---|---|
| E1 | ±5 mm |
| E2 | ±10 mm |
| Code | Process medium temperature |
|---|---|
| T1 | -40~80℃ |
| T2 | ≤150℃ |
| T3 | ≤200℃ |
| Code | Operating pressure |
|---|---|
| P1 | Constant pressure |
| P2 | 1.0 MPa |
| P3 | 1.6 MPa |
| Code | Output signal |
|---|---|
| F1 | (4~20)mA |
| F2 | (4~20)mA + HART |
| F3 | RS485(Modbus) |
| Code | Power supply |
|---|---|
| D1 | Two-wire 24V DC |
| D2 | Four-wire 220V AC |
| Code | Display type |
|---|---|
| G1 | No display |
| G2 | LCD Local display |
| Code | Explosion protection marking |
|---|---|
| U0 | Non-Ex |
| U1 | Ex ia IIC T6 (Intrinsically safe) |
| U2 | Ex d IIC T6 (Flameproof) |
| Code | Ingress protection |
|---|---|
| W1 | IP67 |
| W2 | IP68 |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

