ThreadClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-TF-150
Acoustic fork position controller .. screw
Sound fork position controller, screw configuration. Sound fork position switches, quick response.
01
Classification: Sound fork position controller
02
Structure form: screwdriver
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-TF-150 |
|---|---|
| Measurement principle | Fork vibration: voltage-incentive acoustic fork at the resonance frequency vibration, frequency/ amplitude changes after the fork immersed in the medium, by detection circuit output switch |
| Switching action | Point switch output (high or low, field dialling/key setting) |
| Tuning fork length | Standard 65mm short fork type (suitable for small Nominal size pipe/ narrow space) |
| Suitable medium density | Liquid ≥0.6g/cm3 (low density type ≥0.4) |
| Medium viscosity | ≤1000mm2/s (Low viscosity medium applicable) |
| Repeatability | ±1mm |
| Delay Settings | 0–10s Adjustable |
| Process medium temperature | -40–+100℃ (high-temperature type to +150℃) |
| Ambient temperature | -40~+70℃ |
| Operating pressure | Constant pressure –2.5MPa |
| Tuning fork material | 316L stainless steel (304 Optional) |
| Tuning fork finish | Standard Ra≤3.2μm / electrolytic polishing Ra≤0.8μm (Optional) |
| Process connection | G1 / G¾ / 1NPT / R1 thread (sanitary type Tri-Clamp Optional) |
| Output signal | Voltage-free dry contact SPDT (5A/250VAC)/ transistor output (Optional) |
| Power supply | 24VDC / 220VAC (Optional) |
| Status indicator | LED tri-state instruction (power/ Alarm / normal) |
| Ingress protection | IP65 / IP66 |
| Explosion protection marking | Ex ia II C T4 Ga Intrinsically safe (Optional) |
| Applicable standards | GB/T 28474 / JB/T 12597 / GB 3836.1 |
| Suitable media | Low viscosity liquids such as water, oil, solvents, pharmacological fluids, food beverages; DN25 piping above and small storage tanks |
| Typical applications | Pipelines full/air pipe detection, small pedestal Level, oil-water separators interface, machine bed/compressors level, small food beverage jars |
Product selection
LISEN-TF-150| Code | Process connection (Thread) |
|---|---|
| F1 | G1 Thread |
| F2 | G¾ / R1 Thread |
| F3 | 1NPT Thread |
| F4 | Tri-Clamp carcass (sanitary type) |
| Code | Pressure rating |
|---|---|
| P1 | Constant pressure / PN1.0 |
| P2 | PN1.6 |
| P3 | PN2.5 |
| Code | Tuning fork length |
|---|---|
| L1 | Fork 65mm (Standard) |
| L2 | Longer 100mm |
| L3 | Increase 150–250mm (Specify when ordering) |
| Code | Switching action |
|---|---|
| A1 | High Alarm (filled pipe/filled) |
| A2 | Low Alarm (air pipe/material empty) |
| Code | Tuning fork material / finish |
|---|---|
| M1 | 316L Stainless steel (Standard) |
| M2 | 304 Stainless steel |
| M3 | 316L Ra≤0.8μm (health level) |
| Code | Output signal |
|---|---|
| O1 | Voltage-free dry contact SPDT (Standard) |
| O2 | NPN/PNP transistor output |
| Code | Power supply |
|---|---|
| S1 | 24VDC (Standard) |
| S2 | 220VAC |
| Code | Accessories |
|---|---|
| A0 | None (Standard) |
| A1 | Welding Thread |
| A2 | Battery tubes (high temperature media) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

