PlasticClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-US-100
Ultrasound fluids. Plastics.
Hypersonic fluids, plastic configuration. Non-contact ultrasonic fluids
01
Classification: ultrasound fluids
02
Structure form: plastics
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-US-100 |
|---|---|
| Measurement principle | Acoustic echo range: Transducer launch ultrasound Pulse, time difference between detection and echo, conversion of liquid surface distance at acoustic speed |
| Measurement range | 0.25–4m / 0.4–8m / 0.6–12m (Photo Transducer Selected) |
| Measurement accuracy | ±0.25%FS (full scale), resolution 1mm |
| Dead zone | 0.25m / 0.4m / 0.6m (corresponding Range) |
| Beam angle | ≈8°(4m) / 6°(8m) / 5°(12m) |
| Display type | 4 bit LCD LCD + Chinese English menu, button Configuration |
| Process medium temperature | -20–+60℃ (hot probe to +80℃) |
| Ambient temperature | -20~+60℃ |
| Operating pressure | Constant pressure (≤0.1MPa, open or vent) |
| Case material | ABS engineered plastics (IP65) / PP whole plastics (strong corrosive environment Optional) |
| Transducer material | PVDF polyvinyl fluoride (acid alkalis, fully sealed) |
| Process connection | G2 / G1½ thread / DN80 Flange / Tablet (Falk canal) |
| Output signal | 4–20mA (two-wire) RS485 (MODBUS-RTU) optional /relay ×2 Optional |
| Power supply | 12–36VDC two-wire / 220VAC (Four-wire) Optional |
| Temperature compensation | The built-in temperature sensors are all Range automatic acoustic speed compensation |
| False echo suppression | Digital filter + echo curve Display Configurable inhibiting mixing/shelter interference |
| Ingress protection | IP65 / IP66 (header) |
| Explosion protection marking | Non-Ex (select US-150 for blast protection) |
| Applicable standards | GB/T 28474 / JB/T 12597 / JJG 971 |
| Suitable media | Common pressure containers such as water, sewage, acid, mud, canal/river level, sink towers, pharmacological tanks |
Product selection
LISEN-US-100| Code | Measurement range (Range) |
|---|---|
| L1 | 0.25~4m |
| L2 | 0.4~8m |
| L3 | 0.6~12m |
| Code | Shell/ Transducer material |
|---|---|
| M1 | ABS + PVDF Transducer Standard |
| M2 | PP full plastic surface + PVDF Transducer (strong corrosion) |
| Code | Process connection |
|---|---|
| F1 | G2 / G1½ Thread |
| F2 | DN80 Flange |
| F3 | Stainless steel rack (Close/Open) |
| Code | Output signal |
|---|---|
| O1 | 4–20mA Two-wire (Standard) |
| O2 | RS485(MODBUS-RTU) |
| O3 | 4–20mA + 2 routing relays |
| Code | Power supply |
|---|---|
| P1 | 12–36VDC Two-wire |
| P2 | 220VAC Four-wire |
| Code | Display / configuration |
|---|---|
| D1 | LCD display + Key Configuration (Standard) |
| D2 | LCD display + Configuration |
| Code | Mounting accessories |
|---|---|
| A1 | None (Standard) |
| A2 | Flange / Thread Mounting bracket |
| A3 | The sunshield. |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us
