Fireproof.Click on the picture to zoom in.
PRODUCT SPECIFICATIONS
LISEN-US-150
Ultrasound fluids.
Hypersonic fluids, blast-proof configuration. Non-contact ultrasonic fluids
01
Classification: ultrasound fluids
02
Structure form: blast protection
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | LISEN-US-150 |
|---|---|
| Measurement principle | Acoustic echo range: Transducer launch ultrasound Pulse, time difference between detection and echo, conversion of liquid surface distance at acoustic speed |
| Measurement range | 0.4–8m / 0.6–15m / 1.0–20m (Photo Transducer Selected) |
| Measurement accuracy | ±0.2%FS (full scale), resolution 1mm |
| Dead zone | 0.4m / 0.6m / 1.0m (corresponding Range) |
| Beam angle | ≈6°(8m) / 5°(15m) / 4°(20m) |
| Display type | 4 bit LCD LCD + Chinese English menu, magnetic pen free Configuration |
| Process medium temperature | -40–+80℃ (hot detector to +120℃, dispersor) |
| Ambient temperature | -40~+70℃ |
| Operating pressure | -0.02–0.2MPa (normal pressure/micropressure container) |
| Case material | Embrace aluminium alloy, epoxy powder spray (Flameproof shell) |
| Transducer material | PVDF / PTFE Preservative Envelope (316L Flange Optional) |
| Process connection | DN80 / DN100 flange (PN1.0) G2 Thread / stand |
| Output signal | 4–20mA + HART two-wire (standard)/ RS485 Optional |
| Power supply | 16–36VDC (standard 24VDC Two-wire) |
| Temperature compensation | The built-in temperature sensors are all Range automatic acoustic speed compensation |
| False echo suppression | Digital filter + echo curve Display Configurable inhibiting jar wall/mixer interference |
| Ingress protection | IP66 / IP67 |
| Explosion protection marking | Ex d IIB T6 Gb flameproof / Ex ia II C T6 Ga Intrinsically safe (Optional) |
| Applicable standards | GB/T 28474 / GB 3836.1~2 / JJG 971 |
| Suitable media | Gasoline, diesel, crude oil, solvents, alcohols, liquefied hydrocarbons, and chemical explosive storage tanks Level |
Product selection
LISEN-US-150| Code | Measurement range (Range) |
|---|---|
| L1 | 0.4~8m |
| L2 | 0.6~15m |
| L3 | 1.0~20m |
| Code | Explosion protection type |
|---|---|
| X1 | Flameproof type Ex d IIB T6 Gb (Standard) |
| X2 | Intrinsically safe type Ex ia II C T6 Ga |
| Code | Process connection |
|---|---|
| F1 | DN80 Flange |
| F2 | DN100 Flange |
| F3 | G2 Thread / stand |
| Code | Transducer material |
|---|---|
| M1 | PVDF Preservative emitter (Standard) |
| M2 | PTFE complete (strong corrosive) |
| M3 | 316L flange + PVDF Transducer |
| Code | Output signal |
|---|---|
| O1 | 4–20mA + HART (Standard) |
| O2 | RS485(MODBUS-RTU) |
| O3 | 4–20mA + 2 Road Intrinsically safe Relay |
| Code | Power supply |
|---|---|
| P1 | 24VDC Two-wire (Standard) |
| P2 | 220VAC (after fence/separation) |
| Code | Display / configuration |
|---|---|
| D1 | LCD + Magnetic pen free Configuration (Standard) |
| D2 | LCD + HART Handheld. Configuration |
| Code | Mounting accessories |
|---|---|
| A1 | None (Standard) |
| A2 | Stainless steel Mounting bracket |
| A3 | Scattered (high-temperature media) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us
