ThreadClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-DI-100
The stainless steel diaphragm pressure table.
A stainless steel diaphragm pressure table, screw-line configuration.
01
Classification: stainless steel diaphragm pressure table
02
Structure form: screwdriver
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-DI-100 |
|---|---|
| Measurement principle | Membrane seal + elastic (Bourdon tube) mechanical measurements |
| Case material | 304 Stainless steel Stamped, filling sealed surfaces |
| Dial diameter | Φ63、Φ100、Φ150 |
| Connection | Thread Direct (down/back), T Brush Thread |
| Connection thread | M20×1.5、G1/2、1/2NPT、R1/2 |
| Diaphragm material | 316L, Hastelloy C276, tantalum (Optional) |
| Diaphragm seal body material | 316L Stainless steel |
| Measurement range | 0–0.1MPa to 0–25MPa (include Vacuum) |
| Accuracy class | 1.6 Level (Diaphragm-containing system) |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Process medium temperature | -20–+100℃ (silicone oil recharging, high-temperature type to +200℃ requiring bulk heat) |
| Operating pressure | Static load: ≤2/3 of the upper range limit. Dynamic load: ≤1/2 of the upper range limit. |
| Seal fill fluid | Silicone oil (standard) / low-temperature silicone oil / food-grade glycerin |
| Window material | PC Shatter-resistant glass, card-capped pressurized |
| Suitable media | High viscosity, crystallity, condensable, corrosive media |
| Ambient temperature | -20–+60℃ (fellow type) |
| Diaphragm seal system | Bourdon tube - diaphragms are completely closed, impregnated, crystal resistant, corrosive |
| Applicable standards | GB/T 1226 / JB/T 8611 Imitation Pressure Sheet/ JJG 52 |
Product selection
PREST-DI-100| Code | Connection Thread |
|---|---|
| G1 | M20×1.5 |
| G2 | G1/2 |
| G3 | 1/2NPT |
| G4 | R1/2 |
| Code | Diaphragm material |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Tantalum Ta (strong corrosive) |
| Code | Dial diameter |
|---|---|
| D1 | Φ63 |
| D2 | Φ100 |
| D3 | Φ150 |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 / 0~0.6 |
| R3 | 0~1.0 / 0~1.6 / 0~2.5 |
| R4 | 0~4 / 0~6 / 0~10 |
| R5 | 0~16 / 0~25 |
| R6 | -0.1–0 (vacuum) / -0.1–2.4 |
| Code | Fill fluid |
|---|---|
| F1 | Standard silicone oil (-20–+100℃) |
| F2 | Low-temperature silicone oil (-40–+100℃) |
| F3 | Food class Glycerin (food/medicine) |
| Code | Accuracy class |
|---|---|
| E1 | Level 1.6 |
| E2 | Level 1.0 |
| Code | Heat-dissipation accessories |
|---|---|
| H1 | No dispersible heat |
| H2 | Bulk heat (media ≤200℃) |
| H3 | Cooled plate tubes (high temperature and corrosive) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

