CardsClick on the picture to zoom in.
PRODUCT SPECIFICATIONS
PREST-DI-200
A stainless steel diaphragm pressure sheet.
A stainless steel diaphragm pressure table, card configuration.
01
Classification: stainless steel diaphragm pressure table
02
Structure form: Cards
TECHNICAL SPECIFICATIONS
Technical specifications
Check the specifications against your operating conditions and use the selection tables to confirm your order configuration.
View selection tables ↓| Model | PREST-DI-200 |
|---|---|
| Measurement principle | Membrane seal + elastic (Bourdon tube) mechanical measurements |
| Case material | 304 Stainless steel Stamped, filling sealed surfaces |
| Dial diameter | Φ63、Φ100、Φ150 |
| Connection | Tri-Clamp carcass fast-up connection (sanitary type) |
| Clamp size | 1.5"、2"、2.5"、3"、4"(DN25~DN100) |
| Diaphragm material | 316L (standard), Hastelloy C276, titanium (Optional) |
| Diaphragm seal body material | 316L stainless steel, inner surface Ra≤0.8μm (electrically polished) |
| Measurement range | 0–0.1MPa to 0–6MPa (include Vacuum) |
| Accuracy class | 1.6 Level (Diaphragm-containing system) |
| Elastic sensing element material | 316L Stainless steel Bourdon tube |
| Process medium temperature | -20–+130℃ (sufferable high temperature CIP steam eradication) |
| Operating pressure | Static load: ≤2/3 of the upper range limit. Dynamic load: ≤1/2 of the upper range limit. |
| Sealing gasket | EPDM / silicone rubber / PTFE (food class certification Optional) |
| Seal fill fluid | Food class Glycerin (Standard) / Silicone oil |
| Suitable media | Sanitary fluids such as food, beverages, medicine, bioengineering, etc. |
| Ambient temperature | -20–+60℃ (fellow type) |
| Diaphragm seal system | Bourdon tube - diaphragms are completely closed, impregnated, crystal resistant, corrosive |
| Applicable standards | GB/T 1226 / JB/T 8611 Imitation Pressure Sheet/ JJG 52 |
Product selection
PREST-DI-200| Code | Clamp size |
|---|---|
| K1 | 1.5" (DN25) |
| K2 | 2" (DN50) |
| K3 | 2.5" (DN65) |
| K4 | 3" (DN80) |
| K5 | 4" (DN100) |
| Code | Diaphragm material |
|---|---|
| M1 | 316L Stainless steel |
| M2 | Hastelloy C276 |
| M3 | Titanium Ti |
| Code | Dial diameter |
|---|---|
| D1 | Φ63 |
| D2 | Φ100 |
| D3 | Φ150 |
| Code | Measurement range (MPa) |
|---|---|
| R1 | 0~0.1 / 0~0.16 |
| R2 | 0~0.25 / 0~0.4 |
| R3 | 0~0.6 / 0~1.0 |
| R4 | 0~1.6 / 0~2.5 |
| R5 | 0~4 / 0~6 |
| R6 | -0.1–0 (vacuum) / -0.1–0.6 |
| Code | Gasket material |
|---|---|
| S1 | EPDM (food class certification) |
| S2 | Silicone rubber (high temperature) |
| S3 | PTFE (corrosion) |
| Code | Fill fluid |
|---|---|
| F1 | Food class Glycerin (Standard) |
| F2 | Silicone oil (non-food settings) |
| Code | Surface treatment |
|---|---|
| H1 | Ra≤0.8μm electrolytic polishing (Standard) |
| H2 | Ra≤0.4μm mechanical + electrolytic polishing (high hygiene requirements) |
Confirm specifications and ordering options
Contact us with the measurement target, operating conditions, and installation requirements to confirm your configuration.
Contact us

